Thank you for your replies on my F4 magneto post last weekend. I got back to that project today. I pulled the new points, sanded them and cleaned them. I also went back through the mag looking for areas that might be shorting. Sure enough, the insulation on the primary lead out was real rough where it attaches to the brass post for the points and it had been arcing against the mag body. Once again, thanks for the help. I now have spark.
The carb is next. Water got into it. Bowl was full of rust. I have it apart and soaking in carb cleaner. Might get this 20 running yet.
The carb is next. Water got into it. Bowl was full of rust. I have it apart and soaking in carb cleaner. Might get this 20 running yet.
