Governor cover washers

Anonymous-0

Well-known Member
The governor cover on the SH/H is held on with 5/16" capscrews with a special flat washer, 28950D. I lost mine. Can someone pull one and give me an accurate O.D. and thickness so I can make some new ones? Thanks for any help you can give.
 
Mr Mayor, sounds like you're concerned with tractor being original if you want to make the washers. SH tractors didn't come with the flat washers. They used lock washers # 103320 which is the same as the washers on bolts mounting the top casting on governor if they are original. You are looking at a late printing parts book or site that has updated parts listed. IH went to flat washers on the cover in 1956.
If you still want a flat washer measurement, post back and I will measure one.
 
Aaahhh. That explains it, I didn't lose them after all. I do think I'd like to use the flats though. If you don't mind the diensions would be great.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top