(800) 853-2651
SHOP NOW

WristPin pitting

S

spiffy1

Member
The 3/4 [i.e. 3 sleeve sets] of an overall kit I aquired for that 22-36 had enough preservative [cosmoline maybe] to be annoying, yet lots of surface rust on the sleeves and pistons where it had been rubbed off [2 were assembled, 1 in the box] and enough on the wrist pins for some nice pitting as well.

I polished the first one with crocus cloth, and the pitting probably isn't deep, but deep enough that I can't just polish it away like surface rust. The fit to the rod is perfect; I almost thought I had oversize pins or undersize bushings!

0 tolerance seems like a pretty good answer to me regarding pitting here, but since the originals aren't exactly pristine either, anyone know how forgiving these can be?

Thanks! I'll see if the pictures came out and try to post those too. Noting that reminds me: I somehow didn't get pictures inside that filter yet, but am still drawing a blank [even after a dozen various goolge searches] on any info regarding a plunger assembly for these - and certainly none regarding a paper filter that would agree with it.
 
(quoted from post at 18:54:28 03/10/09) I would use them unless the pitting is radically deep. (more than .010") JimN
Click to expand...

Thanks! I doubt over a couple thou deep, but the % area affected wasn't pretty; this is the one I polished; probably one better and one worse than it.

RustyPin-2.jpg


Polishedpin.jpg
 
your worrying too much! that 22-36 will want to hug and kiss you for being so affectionate to her!it will be just fine. better get it together before it all rusts up, just joking.
 
(quoted from post at 19:56:32 03/10/09) your worrying too much! that 22-36 will want to hug and kiss you for being so affectionate to her!it will be just fine. better get it together before it all rusts up, just joking.
Click to expand...

:lol: I hope it doesn't try to hug or kiss me; my wife might get jealous, not to mention it outweighs me by just a few pounds.

Yeah, I know I'm paranoid; but it isn't mine so I won't be able to hear something going wacky before it takes other parts with it. I'm not worried about it rusting up before it's together though, most of the parts, both the ones new and original were already there! :p
 
You must log in or register to reply here.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top