Oil pressure guage

liveoak415 · Apr 1, 2009

I have an IHC engine oil pressure guage marked with part number 313177-R91. There are no numerical marks on the guage. Instead it simply is marked IDLE on the left side and RUN on the right side. This is a Rochester guage. Does any one know which model IHC tractor this guage was used on?

LenNH · Apr 1, 2009

Don't have any references on this, but this much I do know: the engines on the old splash-lubed engines (Farmall, F-20, F-30, 10-20 and the rest) had very low oil pressure--just enough to pump it up into the trays under the connecting rod dippers. About all you needed to know was that the pump was working ("run" area on the gauge). Sorry I can't help more than this.

NDS · Apr 1, 2009

That is an active part number replaced by 713167c1. Most of the early letter series tractors had that type guage.

Bermuda Ken · Apr 1, 2009

Usually the "Idle-Run" oil pressure gauges were used on dozers and industrial power units.

NDS · Apr 1, 2009

Right you are I was thinking of temperature guage.

Oil pressure guage

liveoak415

Member

LenNH

Member

NDS

Member

Bermuda Ken

Member

NDS

Member

Similar threads