Before and after carb rebuild

ed in cny · Mar 31, 2009

I just did a carb rebuild on the 300 I have. Just thought I would give you guys a look. I asked for advice on getting it set up before I put it on and am not sure what screw to set where. Any help would be great. I will get some red on those bolts and choke hanger before getting it on the tractor.

Brent R. Weaver · Mar 31, 2009

Load adjustment 3 turns and idle screw 1 turn, and idle speed at 1 1/2 theses are just staring points. Brent

ed in cny · Apr 1, 2009

Great Brent but one question is what is what? I don't know what is what thought.

mkirsch · Apr 1, 2009

The instructions that came with the carb rebuild kit should have that information. As I recall:

The screw down on the bowl of the carb toward the bottom is the load screw.

The screw up near the neck on the rear of the carb is the idle screw.

Idle speed adjusment screw is the one where the governor shaft goes in to the carb.

ed in cny · Apr 1, 2009

Thanks guys. Have a better idea as to what to do now. Thanks

Before and after carb rebuild

ed in cny

Member

Brent R. Weaver

Member

ed in cny

Member

mkirsch

Well-known Member

ed in cny

Member

Similar threads