H wont start.

Jeffrey Muehring · Mar 28, 2009

I had the carb apart to clean it up and put in new jets and valve seat. Now it wont start. Plugs getting fire but no gas. H will fire if I spray starting fluid at air intake. Please help. Jeff.

boomer22 · Mar 28, 2009

Sounds like you need to tear the carb apart again and check it out real good, prolly got some plugged up ports or the float wasn't put back right. Just need to recheck your work.

TomH in PA · Mar 28, 2009

Open the drain plug on the carb and see if gas pours out. Sounds like the float isn't letting any in.

Anonymous-0 · Mar 28, 2009

It may be the needle valve. Does it have a rubber tip, if so then the tip may be smashed, causing it to stick.

Jim in michigan · Mar 28, 2009

really dumb question here but did you turn the gas back on? Otherwise its probably a float setting or the needle sticking,,Jim

H wont start.

Jeffrey Muehring

New User

boomer22

Member

TomH in PA

Well-known Member

Anonymous-0

Well-known Member

Jim in michigan

Well-known Member

Similar threads