10-20 head

Anonymous-0 · Mar 26, 2009

hi i brought in my head to be re done and it has one small crack that can be fixed needs new valves seats gieds the bill will come out to 820 and i have to find and buy the valves so is it worth it or should i find a new one i just dont know thanks

El Toro · Mar 26, 2009

Someone on here may have a spare head. Hal

James Williams · Mar 26, 2009

Some one is ripping you off

jimmy

Andy Motteberg · Mar 26, 2009

Sounds high. Find another head.

spiffy1 · Mar 26, 2009

Does sound high, but not sure how much work they were allocating to that crack.

The labor to clean it up, magnaflux for cracks, mill surfaces [if required]and install new valves and guides shouldn't be over $2maybe300.

All new valves and guides might total $500 in parts though. Regardless, since you're looking at new valves anyway, you have no risk going with a different head [if it's guaranteed not to be cracked anyway], other than the clean-up and magnaflux you have in this one and you might even get good valves really giving you better value than your current situation.

Bob Kerr · Mar 26, 2009

Mine cost me $487 about 10 years ago and that included everything. I didn't have a crack, but all seats had to be replaced with inserts and that also included valves and springs which I got from Rice equipment. Now that price didn't include anything to do with the rockers or shaft either.

10-20 head

Anonymous-0

Well-known Member

El Toro

Well-known Member

James Williams

Well-known Member

Andy Motteberg

Well-known Member

spiffy1

Member

Bob Kerr

Member

Similar threads