H carb rebuild question

Jim Isler · Mar 24, 2009

You guys have been so helpful! I am looking forward to when I can help others.

Do ALL IH carbs for model H (mine"s a 1943) have the little ball and spring that came in a rebuild kit?

With the ball and spring in place as shown on the parts manual, the choke (shutter)shaft will not go all the way into place.

Theman · Mar 24, 2009

The carbs on both of my H's have the ball and spring you are describing. If the ball doesn't compress flush with the hole, there's crud in the bottom of the hole or you have too much spring. Also, be sure to use the new felt seal around the choke rod in the housing. Now, if that spring flies out and goes on vacation to parts unknown, a BB will work just fine in its place.

rustyfarmall · Mar 24, 2009

You need to compress the choke shaft lever with one hand, get the shutter plate into place with one hand, and then get the screw started with your other hand. What? You don't have three hands?

H carb rebuild question

Jim Isler

Member

Theman

Member

rustyfarmall

Well-known Member

Similar threads