H(350 Puller) Need help setting up hitch

Anonymous-0 · Mar 22, 2009

Can anyone post some pics of there H pulling tractor hitches. What height should it be set at or make it adjustable? I have one of those 3 point hitch conversions on it now but dont know if it will be strong enough. It has no drawbar.

Wayne in MN · Mar 22, 2009

Post your question on the tractor pulling forum (look on the left side under "discussion forums") for better results.

garytomaszewski · Mar 22, 2009

Just a couple thoughts and if wrong I'm sure there are plenty to correct me;
1- Get rid of the extra weight of the three point
2- Three point changes the whole balance of the tractor.
3- Most pulls have specs on drawbar heigth and distance from axle centers.

sflem849 · Mar 23, 2009

The tractor pulling forum guys are "donkeys" that will do nothing other then mouth on others. You would hate to give away a tip that could lose you $15!
I would ditch the three point as well. Then I would sell it to me

(if it is not cobbled together) I really would get rid of it. It is extra weight, but at least it is in the right spot. I can't speak for H's bc I pull my SMTA WAY more often, but every Farmall I have ever pulled is nose heavy. Stack your weight on the rear axle. DON'T WASTE YOUR TIME BUILDING A FRONT WEIGHT BRACKET!!! They are just for show.
As for hitch height. Make it as high as possible, but keep in mind that the rules will dictate maximum height. It is usually 18-20".

Lee in Iowa · Mar 23, 2009

If you're going to pull stock class you have to have a stock drawbar. If you use stock drawbar you can just bolt the right size angle iron across the front of the stock draw bar to hang front end weights on.

H(350 Puller) Need help setting up hitch

Anonymous-0

Well-known Member

Wayne in MN

Well-known Member

garytomaszewski

Member

sflem849

Well-known Member

Lee in Iowa

Member

Similar threads