Serial #

JH460 · Mar 22, 2009

I am restoring my H tractor and the serial # plate is wore bad. I cannot see all the numbers. Is there any way to find out what that serial # was? Or am I out of luck?

Thanks in advance

D Slater · Mar 22, 2009

If it has the original engine the engine serial # stamped in engine block. Located in the area below the first spark plug will be the same as tractor.

barw · Mar 22, 2009

I have a super "M" with no serial # tag. Would the tractor serial# be stamped in that block location
as well.Thanks for any help.

Jim Becker · Mar 22, 2009

No. The H serial and engine numbers matched, they didn't on the Super M.

D Slater · Mar 22, 2009

Jim answered your question, but yes if its a gas the engine # will be in the same area. If original engine the # could tell which month tractor was assembled in and narrow down what # range tractor was.

Andy Motteberg · Mar 22, 2009

If your H has got the original block, look on a smooth flat spot below the #1 spark plug hole. The serial # is stamped there. Then have a new tag made with that number if the casting codes match.

Serial #

JH460

Member

D Slater

Well-known Member

barw

Member

Jim Becker

Well-known Member

D Slater

Well-known Member

Andy Motteberg

Well-known Member

Similar threads