super m hydraulic question

rtb321 · Mar 21, 2009

i have a late 53 super m with live hyd. i was wondering if there's a pressure port that comes out of the hyd unit under the tank that doesn't need the lever locked back. i'm looking to put two way hyd remotes on it without removing the funtion of the one way system. (its hooked to a 3 pt hitch and works good) i have a two way valve off another m that has no relief valve in it, so i would like to use the relief valve thats built in. is there a port on it i can use, or do i need a two way valve that has a relief on it?
Thanks, Randy

Janicholson · Mar 21, 2009

This should help. The one way valve now within the box must become a pass through to all others by being used for pressure. If the piping was re routed from pump output to one or more two way valves, then re directed to the hitch valve it would work as you wish. Or a single acting valve could be added to control the hitch as shown. let me know if this helps.... JimN

rtb321 · Mar 22, 2009

so you are telling me that there is no pressure port out of the hyd unit without going through the one way valve and locking it on. I guess I'll have to find a valve with a press. relief on it and get pump pressure before the one way valve. Do you know what would've came with the valve I'm looking for.

Janicholson · Mar 22, 2009

If you put a two way valve with a pressure relief on it between the pump output (smaller line/hose), the system will work as you intend. JimN

rtb321 · Mar 23, 2009

Do you know what would've came with the valve with press relief, or where i can get one? I'd like to put a stock looking valve on it.

super m hydraulic question

rtb321

Member

Janicholson

Well-known Member

rtb321

Member

Janicholson

Well-known Member

rtb321

Member

Similar threads