Anonymous-0
Well-known Member
I'm in deep do-do. Two questions (1)where do I look for a good, used regulator and safety valve unit for a 300u with power steering? and
how do I seal a 1/4" threaded hole that has oil leaking from it that is under high pressure (like in a regulator and safety valve!!! Please, don't ask)? I've tried gaskets with no luck and at the moment I have blue silicone on a stud bolt curing in the hole.
Thank you for reading and any help.
how do I seal a 1/4" threaded hole that has oil leaking from it that is under high pressure (like in a regulator and safety valve!!! Please, don't ask)? I've tried gaskets with no luck and at the moment I have blue silicone on a stud bolt curing in the hole.
Thank you for reading and any help.