(800) 853-2651
SHOP NOW

clutch ticking belly pump

A

Anonymous-0

Well-known Member
Good news our FFA super M is running however when we installed the belly pump for our hyd. oil resivoir the clutch is ticking the casting numbers on pump face . going to try and grind them of has new clutch assymbly what gives?
 
Don"t know if this is your problem or not, but when IH was getting ready to install 12 inch clutches in SM and late M tractors they changed the reservoir casting to give more clearance. If you installed a common M one that could be the problem. Off the top of my head the casting # for a late one ends with a E as the last letter.
 
D Slater is correct. If grinding will let it clear W/O compromising it reservoir's integrity, Do it. The Other solution is to leave the Pump out, and Put on Live Hydro. But that takes the effort and a donation or money. Great job, and congratulations on the result. Wish the students well for their effort, From YTMAG as a job that will serve them for their entire lives. JimN
 
Thanks for the help. We have the correct pump tractor has live hyd. just using it to hold the oil. Going to try and grind on it tommorrow . We get it fixed it will be ready for the paint. Tractor was burnt in a fire and sat for 5 years in a pasture. The correction police will be all over us but due to a tight budget we had to use what we could find to get it back together . In all there are parts from 15 other tractors on it . Quite a challenge but we learned a lot. Jerry
 
Had the same thing happen a few years ago There are 2 different pressure plates used in super M's if you get the wrong one it will tick on the pump
 
You must log in or register to reply here.

Similar threads

D
And so it begins
Replies
9
Views
442
steve_in_mo
S
S
Counter Shaft To Belly Pump Removal
Replies
2
Views
484
StuckRusty
S
D
What's it worth 966
Replies
10
Views
1K
dhermesc
D
D
460 Farmall Carb issue
Replies
6
Views
546
dhermesc
D
J
44 A Oil Pressure Gauge and Settings
Replies
2
Views
373
wore out
wore out
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top