Author	[Modern View]
dpendzic 09-24-2012 06:39:30 72.70.232.31 Report to Moderator	I recently bought 2 new master pins from Cat for my 4U. the new ones are one straight diameter without the tapered plugs on the ends. They were about $11 each. [Reply]   [No Email]
OzCat 09-25-2012 22:41:32 58.164.33.53 Report to Moderator	Re: D2 4U Track Master Pin in reply to dpendzic, 09-24-2012 06:39:30   Quoting Removed, click Modern View to see Thanks for your response. I guess they expect you to weld them in place? Cat supplied the plugs and the corks a standard bushing, which is unsuitable-too long, two collars and the pin with no provision for the plugs. When I emailed them for information and advice their response was to flick the question back to their agent who supplied the parts, what a waste of my time and the agents. [Reply]  [No Email]
dpendzic 09-26-2012 06:17:51 24.184.13.49 Report to Moderator	Re: D2 4U Track Master Pin in reply to OzCat, 09-25-2012 22:41:32   The new pins are a tight fit so you just pound them in. Yes--they still have the plugs and corks for the old style pins but don't have the old pins. Just like you i have new plugs and corks but had to destroy the old pins to get them out [Reply]  [No Email]