Author [expand]	[Modern View]
Larry in GA. 10-06-2009 14:48:10 162.40.205.38 85906 Report to Moderator	Let me see if I can explain this clearly ( like mud) Have a John Deere 410 loader back hoe was running good everything working all of a sudden all movement stops No for of aft. No steering and neather the buck or back hoe will do anything. Shut it off come back later and everything works fine for about 6 to 10 minutes then same thing. Changed filters no difference. John Deere hasn’t got me the book yet so I’m lost and the tractor is not at the home place so I’m handy capped there too. I think tomorrow if I can get it to move I will try loading it and bring it here. Where I can go between the computer and tractor easer. Any and all help will be greatly appreciated Larry [Reply]   [No Email]
Hillbilly-tn 10-07-2009 19:18:32 69.129.128.90 85920 Report to Moderator	Re: Another John Deere 410 with Hyd problems in reply to Larry in GA., 10-06-2009 14:48:10   The transmission screen is pluging from brake or clutch disk coming apart. Water or wrong oil in transmission.   [Reply]   [No Email]
Roy Suomi 10-06-2009 17:08:54 76.189.171.7 85909 Report to Moderator	Re: Another John Deere 410 with Hyd problems in reply to Larry in GA., 10-06-2009 14:48:10   I'd try a hydraulic pump destroking solenoid test plug first.. Remove the destroking solenoid and install the test plug in it's place , then try it..Plug can be acquired from Deere parts dept....It's not an ordinary plug , it has a shoulder with o-ring on it....   [Reply]   [Send Email]