Author	[Modern View]
1970-1655 01-13-2013 14:45:31 50.127.120.207 Report to Moderator	Next up on my list of little things to fix on my 1979 350C John Deere is the tachometer cable. I pulled it loose at the tachometer and turned the engine over. Cable never moved. I tried to pull the cable out of the housing to check but it only comes up about 1". How do I go about changing the cable? The engine end is located deep on the rear of the engine and tight to the dash assembly. [Reply]   [No Email]
farmerscotty 01-13-2013 17:42:03 174.125.40.161 Report to Moderator	Re: John Deere 350C Tach Cable in reply to 1970-1655, 01-13-2013 14:45:31   you can buy a generic cable at the auto parts store that might work. Take yours out and see what they have before you go to JD to get one. I have done that on several rigs and works fine.....you cut them to length and crimp an "end" on the cable. Outside wood furnace forced air system. [Reply]  [No Email]
Bob Bancroft 01-13-2013 17:08:55 97.73.64.156 Report to Moderator	Re: John Deere 350C Tach Cable in reply to 1970-1655, 01-13-2013 14:45:31   Many of them have a piece crimped on one end which means they can only come out one way. I imagine your cable assy. is the old braided steel type. I would replace the whole assy. anyhow. [Reply]  [No Email]