Author	[Modern View]
Joe (Wa) 02-20-2013 20:11:28 67.142.175.23 Report to Moderator	New one on me. The clutch wasn"t releasing all the way, grinding gears on shift. Got progressively worst. Release yoke pivot was worn and cracked open on one side. Joe [Reply]   [No Email]
mEl 02-21-2013 04:42:55 71.241.103.12 Report to Moderator	Re: 310 utility clutch in reply to Joe (Wa), 02-20-2013 20:11:28   Joe, A common problem back in the day so to speak, pushed em back down and ran a good bead of weld around em n their still out there. Don't remember any welded ones failing, think the forming process drew the metal to thin there. mEl [Reply]  [No Email]
Joe (Wa) 02-21-2013 09:13:52 67.142.175.20 Report to Moderator	Re: 310 utility clutch in reply to mEl, 02-21-2013 04:42:55   Welding was kinda the plan. Good to know it works. Might even turn out to be stronger than original. Joe [Reply]  [No Email]
Adirondack case guy 02-21-2013 13:17:58 74.69.160.79 Report to Moderator	Re: 310 utility clutch in reply to Joe (Wa), 02-21-2013 09:13:52   I have seen that and also the Button head on the clutch link warn off on that setup. Blamed that on an operator who road the clutch pedal a lot, or did a lot of loader work. Loren [Reply]  [No Email]
Joe (Wa) 02-21-2013 17:26:06 67.142.175.20 Report to Moderator	Re: 310 utility clutch in reply to Adirondack case guy, 02-21-2013 13:17:58   This one is further along than I thought when I first looked into the bell housing. I was using the hand clutch also just to get some things done before tearing it down. Otherwise there is very little wear on the fork or the rod. I agree on riding the clutch, I am definitely guilty of that but that wasn't the case here. Joe [Reply]  [No Email]
4x4stude 02-20-2013 22:32:29 71.237.154.170 Report to Moderator	Re: 310 utility clutch in reply to Joe (Wa), 02-20-2013 20:11:28   Nice catch. I would have been scratching my head for a while before finding that one! [Reply]  [No Email]