Author	[Modern View]
jllw 01-28-2013 18:57:05 98.23.50.101 Report to Moderator	im looking for a needle in a hay stack i need a set of vas fenders can anyone help [Reply]   [No Email]
uggie1 01-30-2013 11:58:48 98.223.116.126 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   You can make a set from VAC fenders. It takes a litlle while. They are the exact clam shell shape. The only thing you really have to do is rotate the fender forward and cut a straight line across the bottom. On the back side al you to do is measure the height of the foot plate flange and then have to cut the reinforcing ribs off to fit above the foot plate flange. The only real difference is the original didn't have ribs on the in side of the fender and the approx 3" piece of tin all across the bottom of the fender which caused it to rust out. There is roll wire on the outer edge of the fender which will have to be knotched ro fit over the foot plate flange. I have made 5 sets of these so far and they look and wook out just great. Finding a real set would be almost impossible to find. Good luck if you have question I maight be able to take some photos to show everyone what I did. Jim Yadon [Reply]  [No Email]
GlennMc 01-30-2013 16:01:13 70.195.66.236 Report to Moderator	Re: looking for vas fenders in reply to uggie1, 01-30-2013 11:58:48   please post some photos [Reply]  [No Email]
C. Amick 01-30-2013 09:48:06 173.224.156.121 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   Have you asked Fred Goodrich? He posts on here regularly, just do a search for his name. [Reply]  [No Email]
GlennMc 01-29-2013 17:37:20 70.195.66.30 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   If you find someone to make these,I would defnately be interested in a set.I have one good enough for a pattern. Glenn McMunn 618=201 =7804 [Reply]  [No Email]
1031D 01-29-2013 06:48:52 107.8.250.69 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   I think Nick only has the one VAS. You might want to find VACLee, he has several parts tractors but when I bought my VAS from him a few years ago he didn't have any decent ones either but sent some rotten ones with. If you can wait I'll make mine and see how hard it is. [Reply]  [No Email]
j hikemper 01-29-2013 06:41:11 50.102.70.24 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   hi jonathon ...Bet nik ky has some ,, but he probably needs them ,/if he can help you with a set ,, we can arrange transit during farm show , , neighbor d . Watson is nearby nik about once a week,... you mite try ruscha ,, Thad mite have a vas out back ,, [Reply]  [No Email]
1031D 01-28-2013 19:27:46 166.182.3.44 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   I also need a set but I'm going to try making them from regular VAC fenders. [Reply]  [No Email]
s,mac 01-28-2013 19:16:46 184.12.241.233 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   Yes VAS fenders are different than VAC.VAS fenders much shorter.Steve. [Reply]  [No Email]
Connor9988 01-28-2013 19:07:03 24.137.133.254 Report to Moderator	Re: looking for vas fenders in reply to jllw, 01-28-2013 18:57:05   Are they different from VA/VAC clamshell fenders? [Reply]  [No Email]