Author	[Modern View]
H. DeBruhl 01-19-2013 14:55:35 74.250.172.6 Report to Moderator	Hello, Does anyone have an exploded parts diagram for a Dc breather. Tractor was missing the original breather, so we bought a used assembly. Apparently not all the parts are there...... Cannot figure out how the oil bowl attaches, etc. Thanks [Reply]   [No Email]
j hikemper 01-20-2013 18:17:03 50.102.81.146 Report to Moderator	Re: Case DC breather in reply to H. DeBruhl, 01-19-2013 14:55:35   When my 52 DC came here 25 yrs ago ,, the breather was completely silted shut with trash oil , filth ,,. it would hardly run ,, chokin itself to death , and know onew knew why ??p-owner rebuilt carb ,, THank You ,, and then gave up and sold the DC to me ,.Dad come down to see what i Had,it was runnin ok , til i throttled up , really rich , stammering and air hissinhg , Pop told me pull off the breather pipe , we did ,,, NO SUCTION AT ALL ???,,next unscrewd the bottom reservoir,. had to take a blok of wood to knock it loose ,, and the motor took rite off like a champ ..we put the top canister in the wood furnace and burned it out...   [Reply]  [No Email]
H. DeBruhl 01-20-2013 16:23:47 74.250.172.6 Report to Moderator	Re: Case DC breather in reply to H. DeBruhl, 01-19-2013 14:55:35   Thanks to all for your help.... Diagram and link to diagram was exactly what I was after. DKase what would it cost to get the thumb screw/nut and all components used to hold the bottom bowl on? I have the neck from the carb, oil bowl and upper breather portion, but nothing used in securing the bottom. Thanks again!   [Reply]  [No Email]
JHH 01-20-2013 05:03:04 174.54.169.23 Report to Moderator	Re: Case DC breather in reply to H. DeBruhl, 01-19-2013 14:55:35   Quoting Removed, click Modern View to see Try this link, then zoom in on it. http://partstore.caseih.com/us/parts-search.html#epc::mr54068ar748898   [Reply]  [No Email]
VACLee 01-19-2013 18:35:20 184.35.8.211 Report to Moderator	Re: Case DC breather in reply to H. DeBruhl, 01-19-2013 14:55:35   Maybe this will help. Lee   [Reply]  [No Email]
H. DeBruhl 01-19-2013 19:02:12 74.250.172.6 Report to Moderator	Re: Case DC breather in reply to VACLee, 01-19-2013 18:35:20   That's exactly what I am looking for. I am having a hard time making out detail when I save the image. Is there any way you could email it to me? Email is open. I would greatly appreciate it. Thanks!   [Reply]  [No Email]
H. DeBruhl 01-19-2013 18:01:18 74.250.172.6 Report to Moderator	Re: Case DC breather in reply to H. DeBruhl, 01-19-2013 14:55:35   Thanks for the help so far! Can anyone post some closeup pics of their breather. If I can get a few good pics of what it should be, I can fabricate it. Thanks again   [Reply]  [No Email]
DKase 01-20-2013 06:24:56 75.102.180.184 Report to Moderator	Re: Case DC breather in reply to H. DeBruhl, 01-19-2013 18:01:18   I am sure I have several out in the parts row if you need an original.   [Reply]  [No Email]
C. Amick 01-19-2013 16:44:46 138.210.9.42 Report to Moderator	Re: Case DC breather in reply to H. DeBruhl, 01-19-2013 14:55:35   There is a wire bail that swings around under it to hold the oil reservoir in place.   [Reply]  [No Email]
caseman-d 01-20-2013 21:14:15 67.142.174.20 Report to Moderator	Re: Case DC breather in reply to C. Amick, 01-19-2013 16:44:46   S series had the wire bale to hold the oil cup casdma-d   [Reply]  [No Email]
DKase 01-19-2013 16:58:27 75.102.180.184 Report to Moderator	Re: Case DC breather in reply to C. Amick, 01-19-2013 16:44:46   No, not a wire bail. It is a flat iron with a threaded bolt and cast iron knob to adjust by hand.   [Reply]  [No Email]