Author	[Modern View]
brokengun 01-18-2013 12:30:42 4.252.209.101 Report to Moderator	I must be getting old. I feel like an idiot for having to ask something that should be simple. I have a wiring diagram and its not clear how the wires connect. I’m painting my 930CK gas and I can’t remember where the wires connect on the solenoid. There’s one (1) wire from the resistor and one (1) wire on the (+) positive side of the coil and I need to know where they go. Are they together? Do they go on the outside of the solenoid or the inside? I know where the other wires go. So PLEASE if someone can remind me off where these wires are to be connected it would be much appreciated [Reply]   [No Email]
denverslim 01-18-2013 18:59:15 63.231.76.245 Report to Moderator	Re: 930 gas wiring help needed in reply to brokengun, 01-18-2013 12:30:42   Don"t feel bad, brokengun. I had to ask the same question a couple of weeks ago, regarding my 830. I yanked all the old wires off and threw them away then a week or so later I"m trying to figger out what goes where. The old noggon don"t work as good as it use to and those wiring diagrams in the books are just a little bit better than nothing. If you need more help here, reply back. I finally got mine running and have all the info at work. Case nutty saved me too. The white wire goes from the resistor then up to the + side of the coil...slim   [Reply]  [No Email]
Case Nutty 1660 01-18-2013 14:20:48 75.127.24.27 Report to Moderator	Re: 930 gas wiring help needed in reply to brokengun, 01-18-2013 12:30:42   this is a 730 gas but should be the same wire from the resistor goes to outside post on solenoid then to coil cnt   [Reply]  [No Email]
brokengun 01-18-2013 16:57:40 4.254.87.99 Report to Moderator	Re: 930 gas wiring help needed in reply to Case Nutty 1660, 01-18-2013 14:20:48   Tom, Thank You! I will give you the best compliment that I can, you’re a gentleman and a real Case Man!   [Reply]  [No Email]