Author	[Modern View]
Case Nutty 1660 01-06-2013 20:16:25 75.127.24.27 Report to Moderator	as to the updates only first year production units needed them (1967) there was a plunger modifcation and new parts on the pickup, unless this baler was never updated and was parked after one or two years of light use I would say it's 68 or newer and is fine with that, one thing to look at is the feeder head as they wear but are repairable if its still all there, as to the needle a wire unit will be harder to find but am sure some where there is one, I will look but I do not know if I have any extras, if they are keep in time and serviced they are not all that bad of a baler, not super high capacity but fine for a small farm cnt [Reply]   [No Email]
E. Schoen 01-06-2013 20:26:57 199.87.200.56 Report to Moderator	Re: 330 baler in reply to Case Nutty 1660, 01-06-2013 20:16:25   I picked up a case square baler from a neighbor. Where would I find a model number on it. It has sat outside for many years and is pretty well rusted, but I figured some of you guys would want some parts off it.   [Reply]  [No Email]
Case Nutty 1660 01-07-2013 01:55:21 75.127.24.27 Report to Moderator	Re: 330 baler in reply to E. Schoen, 01-06-2013 20:26:57   the later 200/220/230/330 balers had a serial tag on the frame by the flywheel maybe the scans with help you identify cnt   [Reply]  [No Email]
E. Schoen 01-07-2013 09:52:47 199.87.200.56 Report to Moderator	Re: 330 baler in reply to Case Nutty 1660, 01-07-2013 01:55:21   I found the serial plate. It is a model 133 serial #641485. It is a pto driven twine tie machine.   [Reply]  [No Email]