| Case Tractors Discussion Forum |
Topic: Case 970 Vibration
[Return to Forum]
| Author |
[Modern View]
|
| Drew970
11-18-2012 13:36:14
64.246.123.235
|
When driving in road gear the whole tractor vibrates, I think it only does this in 4th gear, 3rd ps. I read that it could be a bad bearing in the power shift, is this correct?? What would be a rough estimate for parts? The tractor has around 5,800 hours on it, what else should be replaced if the tractor would need to be split to work on the power shift? Thanks
|
|
|
| j hikemper
11-18-2012 20:13:40
50.102.3.254
|
|
Re: Case 970 Vibration in reply to Drew970, 11-18-2012 13:36:14
|
|
| my 1070 does that at 1st when it has been settingg a while ,it has 23.1x30tires ,chek the air in the tires , combines are bad at vibration that tooo ,.. could be just the nature of the beast ,, and it could be a bearing also ,.if the tranny level is low or full of milky fluid .and has a bad history of being rode hard and put up wet by a fella whose motto is NEVER MIND THE MULES! JUST LOAD THE WAGON! but i !think everyone will admit to a little rattle vibration
|
|
|
| RGMartin
11-18-2012 14:24:01
98.21.105.209
|
|
Re: Case 970 Vibration in reply to Drew970, 11-18-2012 13:36:14
|
|
| Are you sure it isn't the tires? Some tires are awful on the road.. Count the number of lugs on your tires, then try isolate the frequency the vibration is at.
I would think a PS vibration in 4/3 would show in 3/3 too.
|
|
|
| Drew970
11-18-2012 15:00:43
64.246.123.235
|
|
Re: Case 970 Vibration in reply to RGMartin, 11-18-2012 14:24:01
|
|
| The tires don't have much tread left on them. I will drive it some more in different gears on the road tomorrow, and try shifting just to power shift. Thanks guys.
|
|
|
| 2290
11-18-2012 14:00:18
72.72.254.211
|
|
Re: Case 970 Vibration in reply to Drew970, 11-18-2012 13:36:14
|
|
| Drew
I had a 2290 in the shop a couple years ago. Find that the 3 button bearing on the c2/c3 drum were gone. Replace them and vibration went away. It could be the bearing in the oil distributor. Does it do this if you shift the power shift to #3 while sitting still at a high rpm.Marlin1
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
