Author	[Modern View]
Dodgeit 10-09-2012 12:06:15 65.199.61.227 Report to Moderator	Looking to save some weight by using a different wheel rim combo in the front. What else would mount to the spindle? Has the factory set up. Looking for something with a solid stamped rim if possible. [Reply]   [No Email]
1031D 10-10-2012 22:34:00 107.8.250.69 Report to Moderator	Re: 711b front rim wheel options need help in reply to Dodgeit, 10-09-2012 12:06:15   Swap in a manual steering unit from a 400. Also, the 400 narrow front is lighter than the later ones. I have a narrow front from a 930 with 6 bolt hubs and an extra set of hubs in the shop. I used to pull my 1030 with a narrow front until I got tired of farming with it like that and rebuilt the wide front. [Reply]  [No Email]
Dodgeit 10-10-2012 11:30:50 65.199.61.227 Report to Moderator	Re: 711b front rim wheel options need help in reply to gusbratz, 10-09-2012 12:06:15   Quoting Removed, click Modern View to see I'll agree with you as long as the front is coming up you don't need to lose weight up front. I need to lose weight up front to get the front up so it will float in the lighter classes. It's got that big honk'n power steering box in the front. [Reply]  [No Email]
Dodgeit 10-09-2012 17:05:32 99.95.157.81 Report to Moderator	Re: 711b front rim wheel options need help in reply to hondaracer2oo4, 10-09-2012 12:06:15   Quoting Removed, click Modern View to see I appreciate the reply from a Case expert. 10# off the front is the same as adding 90-100# in the back when pulling. [Reply]  [No Email]
casecollectorsc 10-09-2012 19:01:25 64.33.228.227 Report to Moderator	Re: 711b front rim wheel options need help in reply to Dodgeit, 10-09-2012 17:05:32   Keeping the front end on the ground keeps the drawbar level which keeps the skid up and easier to pull. 200# of weight on my L on the front axle made it go farther than 200 on the back. [Reply]  [No Email]
Dodgeit 10-09-2012 13:21:49 65.199.61.227 Report to Moderator	Re: 711b front rim wheel options need help in reply to Dodgeit, 10-09-2012 12:06:15   Thanks [Reply]  [No Email]
Nedd 10-09-2012 13:14:55 97.125.245.155 Report to Moderator	Re: 711b front rim wheel options need help in reply to Dodgeit, 10-09-2012 12:06:15   Later 730 and 830's had 6 bolt front wheel and hub. I know they interchange with that spindle. [Reply]  [No Email]
Adirondack case guy 10-09-2012 14:43:57 74.69.160.79 Report to Moderator	Re: 711b front rim wheel options need help in reply to Nedd, 10-09-2012 13:14:55   I doubt you would save 10# with the 30/70 series setup. The hubs were rally HD, plus you have the weight of a solid pressed steel wheel, verses a rim with 4 lugs. Loren [Reply]  [No Email]