Author	[Modern View]
Judith Charbonneau 07-20-2012 14:31:54 75.106.255.52 Report to Moderator	I have just found out that the motor I took in to be rebuilt has cracks in the block and I am in need of a 188 D or 207 D motor. I understand that combines and forklifts have this motor, but do not know what the model numbers are that have these. Can anybody help me with the numbers of combines or forklifts that I may be able to find for a motor. Thank you for your time and consideration in this matter. I have a 530D construction king with a model 32 loader and backhoe. [Reply]   [No Email]
Fred Goodrich 07-23-2012 05:03:03 108.176.84.186 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Judith Charbonneau, 07-20-2012 14:31:54   I have 188 and 207 complete running engines for sale in NY 6076423293 [Reply]  [No Email]
case1570 07-23-2012 20:01:18 50.105.156.166 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Fred Goodrich, 07-23-2012 05:03:03   I am looking for a 188D for a Case 480CLL. What are you asking for the motor? Please email me back. Thanks! Brian [Reply]  [No Email]
1031D 07-21-2012 13:15:24 166.182.3.209 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Judith Charbonneau, 07-20-2012 14:31:54   Most mechanics around here don't have the means to do engine machine work. Ask him for the block, take it to a reputable engine machine shop and get their opinion. [Reply]  [No Email]
1031D 07-20-2012 22:00:54 107.8.251.59 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Judith Charbonneau, 07-20-2012 14:31:54   A while back I had a VAC block pinned on the bottom sleeve holes and it was cheaper than another engine, supposes to be stronger than the block itself. [Reply]  [No Email]
Judith Charbonneau 07-21-2012 11:13:42 99.196.192.58 Report to Moderator	Re: NEED 188Dor 207D motor in reply to 1031D, 07-20-2012 22:00:54   I am confused with all the suggestions, I just know that the mechanic said I needed another engine, I will discuss these options with him to see if they will work, where are you located?? Judy [Reply]  [No Email]
Florida Glenn 07-20-2012 16:05:09 72.184.187.113 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Judith Charbonneau, 07-20-2012 14:31:54   Where are the cracks? I've seen some pretty serious cracks repaired to the point you'd never know they were there. [Reply]  [No Email]
Judith Charbonneau 07-20-2012 17:05:40 99.196.192.58 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Florida Glenn, 07-20-2012 16:05:09   I was told the cracks are around the top of the cylinder bore where the sleeves lock into place [Reply]  [No Email]
george md 07-21-2012 23:23:39 209.213.167.201 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Judith Charbonneau, 07-20-2012 17:05:40   Judith, I'm in Md. If you want to chat about it, send me an email with a phone # and I'll call you. george [Reply]  [No Email]
george md 07-20-2012 21:30:31 209.213.167.201 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Judith Charbonneau, 07-20-2012 17:05:40   Counterbore repairs are available for most engines. If it is cracked between the bores , welding and remachining is an option ,also lower bore repairs are available. I have made and installed lowers and bought and installed the counterbore repairs. george [Reply]  [No Email]
Judith Charbonneau 07-21-2012 11:06:07 75.106.192.54 Report to Moderator	Re: NEED 188Dor 207D motor in reply to george md, 07-20-2012 21:30:31   I am not knowledgable about welding of blocks, the mechanic doing the job told me we needed another block, I can discuss this with him, where are you located? judy [Reply]  [No Email]
Florida Glenn 07-21-2012 13:05:33 72.184.187.113 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Judith Charbonneau, 07-21-2012 11:06:07   Granted, it would be a lot easier to find another block and simply swap them out. However, it would probably be cheaper to repair and, as pointed out, it will probably be stronger if done by the right person. It wouldn't be hard to find a 530 motor, problem might be you'd have to buy the entire tractor to get the motor and then you might get another motor with cracks. If the mechanic you're working with doesn't want to do the job, find another. Just my humble opinion. by the way, is the engine already apart and disconnected from the tractor, or are they still bolted together? [Reply]  [No Email]
Judith Charbonneau 07-21-2012 13:25:40 75.106.192.36 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Florida Glenn, 07-21-2012 13:05:33   The motor is out of the tractor and apart, I will discuss the option with the mechanic, and let him know all the information I have received this weekend. Where are you located??? Judy [Reply]  [No Email]
Florida Glenn 07-21-2012 13:11:46 72.184.187.113 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Florida Glenn, 07-21-2012 13:05:33   You might want to do a google image search on cracked block repair. That will at least let you see and read what needs to be done. These kinds of repairs used to be very popular, especially during WW2 when parts were hard to come by. Search for something like "Tractor engine block repair" or "crack repair in tractor engine block." That should at least get you into the neighborhood. [Reply]  [No Email]
Florida Glenn 07-21-2012 13:20:16 72.184.187.113 Report to Moderator	Re: NEED 188Dor 207D motor in reply to Florida Glenn, 07-21-2012 13:11:46   Found this in a quick search - not exactly what you want but will give you an idea www.ytmag.com/cgi-bin/viewit.cgi bd=ttalk&th=936778 [Reply]  [No Email]