| Case Tractors Discussion Forum |
Topic: Need hardware for 38 inch rubber on a 930,.
[Return to Forum]
| Author |
[Modern View]
|
| Lamont
06-29-2012 20:40:51
69.29.118.211
|
I am wanting to change my 930 over to 38 inch rubber. All I really need are the 8-bolt cast centers. I can use the axle hubs that are on it now as well as the wedges, and I have a pair of 38 in rims. Thanks for any help.
|
|
|
| dboll
06-30-2012 14:58:39
64.61.211.3
|
|
Re: Need hardware for 38 inch rubber on a 930,. in reply to Lamont, 06-29-2012 20:40:51
|
|
| early 9/1070's have the same axle size as a 9/1030
|
|
|
| RGMartin
06-30-2012 11:59:03
173.189.140.115
|
|
Re: Need hardware for 38 inch rubber on a 930,. in reply to Lamont, 06-29-2012 20:40:51
|
|
| I have a 770 here on 38s, seen 870s too. They are out there if you look hard enough.
|
|
|
| outsidersag
06-30-2012 10:05:52
75.235.25.184
|
|
Re: Need hardware for 38 inch rubber on a 930,. in reply to Lamont, 06-29-2012 20:40:51
|
|
| I think centres from a 1070 will work
|
|
|
| Paul A Young
06-30-2012 08:50:36
74.206.50.252
|
|
Re: Need hardware for 38 inch rubber on a 930,. in reply to Lamont, 06-29-2012 20:40:51
|
|
| Kind of hard to say,most I have seen did.
|
|
|
| Paul A Young
06-30-2012 03:32:17
74.206.50.252
|
|
Re: Need hardware for 38 inch rubber on a 930,. in reply to Lamont, 06-29-2012 20:40:51
|
|
| Have you looked in any savage yards?The centers off of the 70 series are the same,just no eagle in casting.
|
|
|
| Lamont
06-30-2012 07:15:15
69.29.118.211
|
|
Re: Need hardware for 38 inch rubber on a 930,. in reply to Paul A Young, 06-30-2012 03:32:17
|
|
| Everything I've found is 34 inch as I've only come across 970s. Did most 1070s come with 38 rear rubber?
|
|
|
| Nedd
06-30-2012 10:27:30
174.30.65.33
|
|
Re: Need hardware for 38 inch rubber on a 930,. in reply to Lamont, 06-30-2012 07:15:15
|
|
| I have seen several 1070 with 38s. But more with 34s. If you are really dire straights I think some of the bigger 70 series will work but have more of a dish. Or you can get the longer cleats and use your 34 centers. I think we have some on the 3594 to get to 42 inch tires. They're out there but good luck finding them.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
