Author	[Modern View]
JoeBob-IN 02-22-2012 14:40:00 38.111.240.9 Report to Moderator	I need a valve for a 2390. I have several 1070 and 1370 heads in storage. Does anyone know if either of the 70 series valves are the same as the 2390? Need the exhaust valve. Thanks! [Reply]   [No Email]
Lamont 02-23-2012 17:56:28 72.161.161.55 Report to Moderator	Re: Valves-cross over to other engines? in reply to JoeBob-IN, 02-22-2012 14:40:00   Don't know if this will help or not, but what I find online is this: 1370 Prior to SN8727601 Exhaust - A41573 - Set of 2 Intake - A41574 - Set of 2 1370 SN8727601 and after Exhaust - A46289 - Set of 2, Replaces A41573 Intkae - A44575 - Set of 2 2390 Exhaust - A41573 - Set of 2 Intake - A66193 - Set of 2, Order A44575 Again, that's what I find online. I am NOT responsible for errors on CASEIH's or CNH's parts information. LOL! [Reply]  [No Email]
Duner Wi 02-22-2012 19:21:49 216.226.80.242 Report to Moderator	Re: Valves-cross over to other engines? in reply to JoeBob-IN, 02-22-2012 14:40:00   My Sealed Power book says 1370 and 2390 exhausts will work as long as it is turbo'ed. No listing on the non -turbo valves. For the intakes there are 2 different seat angles, 30 degree and 45 degree. Earlys were 30 degrees. This info is for A504-BD. Hope this info is correct. No guarantees. [Reply]  [No Email]
Lamont 02-22-2012 19:31:35 72.161.161.55 Report to Moderator	Re: Valves-cross over to other engines? in reply to Duner Wi, 02-22-2012 19:21:49   A504-BD is a NON-Turbo engine. Turbo engines were BDT with the ending of "T" designating the turbo. [Reply]  [No Email]
Duner Wi 02-23-2012 05:15:31 216.226.80.242 Report to Moderator	Re: Valves-cross over to other engines? in reply to Lamont, 02-22-2012 19:31:35   Thanks, goofy parts book lists parts for A504BD as non turbo(line 30) BUT next section (line 31) is for A504BD turbocharged diesel 6 Cyl with 4 5/8 bore. To confuse matters more it lists 2 different overhaul kits. One for A504BD turbo diesel with 1.625 pin diameter and another for A504BDT with 1.800 pin diameter. The line 30 section for A504BD NA diesel does not even list valves. [Reply]  [No Email]
Duner Wi 02-23-2012 05:15:18 216.226.80.242 Report to Moderator	Re: Valves-cross over to other engines? in reply to Lamont, 02-22-2012 19:31:35   Thanks, goofy parts book lists parts for A504BD as non turbo(line 30) BUT next section (line 31) is for A504BD turbocharged diesel 6 Cyl with 4 5/8 bore. To confuse matters more it lists 2 different overhaul kits. One for A504BD turbo diesel with 1.625 pin diameter and another for A504BDT with 1.800 pin diameter. The line 30 section for A504BD NA diesel does not even list valves. [Reply]  [No Email]
Tommy Railsback 02-22-2012 15:14:10 174.19.12.88 Report to Moderator	Re: Valves-cross over to other engines? in reply to JoeBob-IN, 02-22-2012 14:40:00   It will take a little time, but you can go to the on-line parts books and check the numbers. [Reply]  [No Email]
JoeBob-IN 02-22-2012 16:30:40 38.111.240.9 Report to Moderator	Re: Valves-cross over to other engines? in reply to Tommy Railsback, 02-22-2012 15:14:10   I tried but the valve out of the 1070 head didn't even cross to any listed for a 1070. So apparently they haven't got all of the numbers listed and it appears some of the listed numbers are for a set rather than an individual valve. Was hoping someone knew off hand. [Reply]  [No Email]