Author [expand]	[Modern View]
Phil k 11-20-2009 11:23:15 192.139.30.199 148227 Report to Moderator	If anyone has any ideas why they are slow loader barily lift empty and I really have to rev it up with a bale on. How do I check suction screen. thanx [Reply]   [Send Email]
mEl 11-21-2009 05:57:12 71.241.110.174 148257 Report to Moderator	Re: Case 1030 Hyraulics very slow in reply to Phil k, 11-20-2009 11:23:15   The 30-70 series had a tendency to blow the oring inside the relief valve cartridge allowing failure of the relief valve to operate properly, there are three orings and a backup ring that should be replaced. There were also a few valves that had a different style relief that the seat for the ball would get beat up and required converting to the later style relief valve. Also debris beat into the bottom of the bore could keep the relief valve plunger from seating properly. Also a weak pump could cause it and that has to be diagnosed with a flo meter or by substituting it with a known good one. I would recommend that you get a local dealer to flo the pump to remove all doubt as to where the problem lies. I'm not much for guessing and thats what we are reduced to without facts and figures from tests. mEl   [Reply]   [No Email]
Jeff From WI. 11-20-2009 13:07:46 172.190.101.187 148230 Report to Moderator	Re: Case 1030 Hyraulics very slow in reply to Phil k, 11-20-2009 11:23:15   Phil, Have you checked the Hyd Filter under the seat platform?   [Reply]   [Send Email]