|
| |
| Allis Chalmers Discussion Forum |
Topic: Re: WD45 clutch
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| Aaron SEIA
11-18-2012 13:38:19
67.55.181.57
|
Eldon has it right, remove the radiator and all sheet metal. I find it easier to split the steering shaft at the u-joint and slide the steering wheel back. That give some extra clearance for the right side block ears to clear. 4 bolts in the back, 2 under the front and slide the engine forward and out. Good time to check the lower rad hose and fan belt as the lower rad hose has to come out to do the fan belt anyway. Bellhousing isn't made for the clutch to come out the bottom. I found a trick using a 3/8 long extension and a 3/4 socket to get the rad bolts out. If you can't find my posts on it here ina s earch, let me know and I'll describe it again.
AaronSEIA
|
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
