|
| |
| Allis Chalmers Discussion Forum |
Topic: freeman loader seals
[Return to Forum]
| Author |
[Modern View]
|
| tom grim
10-30-2012 15:44:59
24.154.167.178
|
My WD with the freeman loader is leaking way to much.The cylinder shafts are 1.5 " and look great. Does anyone have info on where to get seals or should I just pull apart and take the samples to a cylinder shop? thanks
|
|
|
| CTucker
11-01-2012 14:44:12
64.196.47.4
|
|
Re: freeman loader seals in reply to tom grim, 10-30-2012 15:44:59
|
|
| The packing is replaceable but are you out of travel on the packing gland? It can be snugged up for years more service if the nut isn't tight against the gland.
|
|
|
| dakota dave
11-01-2012 10:11:40
66.231.105.7
|
|
Re: freeman loader seals in reply to tom grim, 10-30-2012 15:44:59
|
|
| You can get them from and AGCO dealer. I"ve rebuilt two sets in the last month. now both may loaders have new seals and don"t leak. it was around $15.00 per set. I don"t know why you wouldn"t just get them from AGCO they come as a set and you need to pull the cylinder apart to install them correctly. The hardest part is getting the snapring off the bottom of the piston. they are v shaped leather seals so soak in oil befor installing. the last pair only took me a hour to do both rams. the ones i took out had been cut to slide over the ram without removing the piston but they have always leaked alittle.
|
|
|
| tom grim
10-31-2012 12:45:13
24.154.167.178
|
|
Re: freeman loader seals in reply to tom grim, 10-30-2012 15:44:59
|
|
| Ted in NE-OH
10-30-2012 19:48:57
173.189.169.175
|
|
Re: freeman loader seals in reply to tom grim, 10-30-2012 15:44:59
|
|
| AGCO has them. Sandy Lake Implement 1-888-252-0656
|
|
|
| greygoat
10-30-2012 19:40:05
184.158.14.130
|
|
Re: freeman loader seals in reply to tom grim, 10-30-2012 15:44:59
|
|
| Baum Hydraulics...but first..you're going to
need to know the type of seal, or packing, and
the size's..Inside and outside diameters, and
thickness.
|
|
|
| steve(ill)
10-30-2012 18:24:09
74.36.185.24
|
|
Re: freeman loader seals in reply to tom grim, 10-30-2012 15:44:59
|
|
| | Dont know what kind of seals you have, but for the B and WD 45 cylinders, i buy VEE pakcing from these guys. http://www.alleghenyyork.com/#
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
