|
| |
| Allis Chalmers Discussion Forum |
Topic: AC 7040 duals make popping sound
[Return to Forum]
| Author |
[Modern View]
|
| Jack Boedigheimer
10-25-2012 21:13:49
65.182.230.118
|
AC 7040 with on axle duals. The left side makes a popping noise on right turns. Have checked the bolts and all seem tight, the wheel is new as the center broke out of the old one. Any ideas what else I should check to find the problem ? Thank you
|
|
|
| Deere Scotty
10-26-2012 03:09:59
98.227.65.92
|
|
Re: AC 7040 duals make popping sound in reply to Jack Boedigheimer, 10-25-2012 21:13:49
|
|
| Might try raising up the back end, & spinning both sides by hand. You will also be able to shake the wheels around (at least without calcium in them) a little bit. If nothing; then try taking the outer wheel off, & try everthing. Turning tight with / without brakes. Running on the side of a steep slope both directions. That would help determine an axle / bearing problem. Thats at least a start!
|
|
|
| GeneMO
10-26-2012 01:36:31
71.1.114.49
|
|
Re: AC 7040 duals make popping sound in reply to Jack Boedigheimer, 10-25-2012 21:13:49
|
|
| | Not an axle bearing is it? sometimes sound travel through steel making it hard to figure out where the sound is coming from. Gene
|
|
|
| JMS./MN
10-25-2012 21:39:35
209.237.125.241
|
|
Re: AC 7040 duals make popping sound in reply to Jack Boedigheimer, 10-25-2012 21:13:49
|
|
| Don't know how your duals are made, but if the bolts grab the rim with wedges, check for slippage/wear on the wedge where it contacts the rim. Check for shiny spots showing that the wedges are sliding on the rim.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
