|
| |
| Allis Chalmers Discussion Forum |
Topic: Re: Oil pressure on Allis CA
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| steve(ill)
08-18-2012 18:49:26
74.36.188.36
|
may not help, but just FYI... the pump puts out a fixed volumn. The filter is packed with cotton swab and is very restrictive. THE filter allows 15% of the oil from the pump to go thru it and dump back to sump. The remaining 85% of the oil goes thru the cam shaft and sprays thru orifices at the bearings on the crank and pistons. There is also an external oil line going to the head that lubes the rocker arms and valves..You dont necessarily need high pressure, you need flow. THe PSI gauge is just a way to verify flow. Filter should have a 1/4 inch steel tube inside it with a 1/8 inch hole (i think) to regulate the flow thru the filter and back to sump. Thicher oil, more restrictive filter, smaller hole in the filter tube, and good pump seal faces are all ways to increase flow and pressure.
|
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
