|
| |
| Allis Chalmers Discussion Forum |
Topic: CA engine swap
[Return to Forum]
| Author |
[Modern View]
|
| SIDE x SIDE
07-13-2012 06:00:01
65.5.174.78
|
|
| steve(ill)
07-13-2012 15:27:18
74.36.161.168
|
|
Re: CA engine swap in reply to SIDE x SIDE, 07-13-2012 06:00:01
|
| why do you need to stroke ? Puller ? If you want a few more HP on a daily use tractor, get the compression ratio up. Present is less than 7 to 1.. Mill the head, port the inlet / exhaust, check motor RPM spring on the governor, good carb with proper jets.
|
[Reply] [No Email] | |
| SIDE x SIDE
07-13-2012 19:36:41
75.201.111.186
|
|
Re: CA engine swap in reply to steve(ill), 07-13-2012 15:27:18
|
| Yes I'm building a "puller". What would the compression need to be 9:1 ? Thanks for the info Steve.
|
[Reply] [No Email] | |
| steve(ill)
07-14-2012 16:13:18
74.36.161.168
|
|
Hey Dick L. in reply to SIDE x SIDE, 07-13-2012 19:36:41
|
| Dick Lemmens has made pullers out of the 125 inch motors. I think he planes the head .200 inch to raise the compression (probably up to 9 to 1), then ports and polishes the intake and exhaust ports to get better flow. He has also put in larger chevy valves, but thats getting into a lot of work and cost. You can also up the RPM 2-300 RPM to get a little more kick off the line. Maybe some carb work to go with the bigger ports.. If Dick does not chime in, start another post with the title "hey dick l".
|
[Reply] [No Email] | |
| MMZAck
07-13-2012 09:36:04
170.2.52.28
|
|
Re: CA engine swap in reply to SIDE x SIDE, 07-13-2012 06:00:01
|
| | You want a D14 engine that is 149 cubes. Parts are available and that engine shouldn't be too tough to find. There is an overbore kit available that makes it 156 cubes. The D15 Series II engine is 160 cubes but it's what they call the "wide block" engine and won't look correct in the tractor. Parts are expensive and much more difficult to find than for the 149. I'm working on a CA puller right now and found a 149 power unit for it as a starting point. Zack Zack
|
[Reply] [No Email] | |
| SIDE x SIDE
07-13-2012 11:31:01
65.5.174.78
|
|
Re: CA engine swap in reply to MMZAck, 07-13-2012 09:36:04
|
| Thanks Zack. What about strocking the 149cc ?
|
[Reply] [No Email] | |
| ca+
07-13-2012 19:49:36
71.55.79.150
|
|
Re: CA engine swap in reply to SIDE x SIDE, 07-13-2012 11:31:01
|
| sent u a email
|
[Reply] [No Email] | |
| Bob Bancroft
07-13-2012 07:59:09
97.73.64.145
|
|
Re: CA engine swap in reply to SIDE x SIDE, 07-13-2012 06:00:01
|
| The latest and biggest version of that engine that I know of is the 160 cu in used in the late D15 tractor, and other various machines.
|
[Reply] [No Email] | |
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
