Author	[Modern View]
Sean C 06-07-2012 15:43:05 99.197.104.9 Report to Moderator	I have a 1947 allis C a couple days ago it ran fine for about 20m mins long enough to cut the front yard then it started cutting out and died so i put all new gaskets on it and it started but ran rough then died then today I got it started agian and it was even worst it was miss fireing and all and died now it wont start at all and I dont think im getting any fire now plz someone help... [Reply]   [No Email]
steve(ill) 06-08-2012 19:06:18 173.84.221.80 Report to Moderator	Re: 1947 C wont run very long in reply to Sean C, 06-07-2012 15:43:05   you could change the condenser inside the mag and see if that does it ($5) , but you probably will need a coil also ($60). [Reply]  [No Email]
Jim Phelps 06-07-2012 16:53:46 12.169.233.25 Report to Moderator	Re: 1947 C wont run very long in reply to Sean C, 06-07-2012 15:43:05   Does it have points etc or mag, I know my CA started acting like that, at first I thought it was the coil, but turned out to be the condenser. [Reply]  [No Email]
Sean c 06-07-2012 17:09:38 166.216.194.180 Report to Moderator	Re: 1947 C wont run very long in reply to Jim Phelps, 06-07-2012 16:53:46   Its has a mag [Reply]  [No Email]
old 06-07-2012 20:56:22 209.86.226.19 Report to Moderator	Re: 1947 C wont run very long in reply to Sean c, 06-07-2012 17:09:38   All new gaskets?????????????????? What the heck did you do that for gaskets do not make them run!!!!. Do the simple trouble shooting before throwing parts at things or you will have more not less trouble. #1 check for spark. You need to have a good blue/white spark that jumps a 1/4 inch gap or more. If good then look at a fuel problem. Pull the drain plug out of the bottom of the carb and let it flow for a few minutes. Catch to gas so as to look at it for dirt/rust/water. If you find you have a spark problem send me an e-mail and I can send you a manual for that mag to help you help your self [Reply]  [No Email]