Author [expand]	[Modern View]
Andy P 02-07-2010 19:18:31 74.198.148.46 123661 Report to Moderator	Would like to repair water pump on model B, would like to know where to get seal and brg. [Reply]   [Send Email]
oldironman 02-08-2010 05:15:45 74.71.229.246 123670 Report to Moderator	Re: Allis B water pump in reply to Andy P, 02-07-2010 19:18:31   I know what you mean about a challenge. I did one on a 175 allis and it worked out fine. I used a water pump seal and bought a bearing off of eBay for two dollars. The job cost me 12 dollars instead of 250 from dealer. I simply will not be ripped off. Well worth the two hours that I spent. Good luck, it can be done.   [Reply]   [No Email]
old 02-07-2010 20:55:10 4.245.7.138 123664 Report to Moderator	Re: Allis B water pump in reply to Andy P, 02-07-2010 19:18:31   I learned a good number of year ago that with out ALL the right equipment your better off buying a rebuilt one or a new one. To be able to rebuild one you need the correct press and the correct dies or you will end up with a broken housing and then what you have is scrap iron and that means no core and a core can in turn cost you an extra $25 or more. I tried to rebuild 1 water pump and it cost me $75 for a core. Ya not a B pump but I learned a big lesson   [Reply]   [Send Email]
Jeff Z. 02-07-2010 19:35:03 74.76.3.113 123662 Report to Moderator	Re: Allis B water pump in reply to Andy P, 02-07-2010 19:18:31   You will probably find that you might need machine work done to the pump housing and with that cost added to parts you will probably be alot better off buying a pump. Give Tony at tonystractors.com a call for a pump.   [Reply]   [Send Email]
Andy P 02-07-2010 21:27:58 74.198.148.45 123665 Report to Moderator	Re: Allis B water pump in reply to Jeff Z., 02-07-2010 19:35:03   I Know that many time its not worth rebuilding your own but in this case the housing has some damage which is repairable but useless as a core. Do have tools needed for this job and have done a few. Do also enjoy the challenge. Appreciate your concerns and am grateful,thanks guys. We used to be able to buy these parts direct from the dealers but not no more.   [Reply]   [No Email]
Jeff Z. 02-08-2010 04:37:07 74.76.3.113 123668 Report to Moderator	Re: Allis B water pump in reply to Andy P, 02-07-2010 21:27:58   See If AGCO has the parts. Dealer locator link to find a dealer close to you. You can also call Sandy Lake Implement. Brenda or Bette in parts will tell you if AGCO has the parts. 1-888-252-0656 Find a Dealer   [Reply]   [Send Email]
bjb in Tx from Ne 02-08-2010 05:36:47 141.197.12.183 123671 Report to Moderator	Re: Allis B water pump in reply to Jeff Z., 02-08-2010 04:37:07   AGCO had the sealed bearing about 6 yrs ago when I rebuild mine. Remembering back I think the seal is integrated into the bearing. AGCO can also get the carbon ring as well. Not too difficult to rebuild if you take your time. The only problem I had was a hairline crack on the outside when I drilled two of the screws that hold the back plate on. Brazed it up and it works just fine.   [Reply]   [Send Email]
Jeff Z. 02-08-2010 06:03:36 74.76.3.113 123672 Report to Moderator	Re: Allis B water pump in reply to bjb in Tx from Ne, 02-08-2010 05:36:47   I just talked to my AGCO dealer about some parts I need and he said AGCO still have the rebuild parts for the water pump.   [Reply]   [Send Email]