Low Prices - Fast Shipping - Thousands of Items in Stock!

Secured by SSL	Order online or call (800) 853-2651

• Tractor Parts • Manuals • Videos & DVDs • Hats • Books Featured Item    ROP Frame Assembly • Contact Us • Shipping Rates • Return Policy • Ordering Help • Company Info • Parts Warranty • Tractor Info    (YT Home)

Ford 9N, 2N, 8N - Steering [ Return ] Steering Sector - Left Hand - Left Hand steering sector shaft (single gear) 5 tooth, For (8N s\n 216989 and up), NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 tooth, you can use this part but must replace both right and left. Shaft cover must be (late style), see picture. (Part No: 251293_) $141.17 [Enlarge Picture] Front Spindle - Right Hand Spindle For 9N, 2N. Heigth of spindle shaft is 11 inches. Keyway on inside is 5\16 inches. Notch on outside of shaft. (Part No: 2N3105) $66.18 [Enlarge Picture] Front Spindle - Left Hand Spindle For 9N, 2N. Heigth of spindle shaft is 11 inches. Keyway on inside is 5\16 inches. Notch on outside of shaft. (Part No: 2N3106) $58.01 [Enlarge Picture] Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3\4 inches with notch on outside and 1\4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3105B) $64.33 [Enlarge Picture] Spindle, Front - Left Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3\4 inches with notch on outside and 1\4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3106B) $64.33 [Enlarge Picture] Shaft and Pinion Assembly - Fits 9N and 2N tractors 1939-47. Contains shaft and pinion only. For complete set use Part # SGS3. (Part No: 9N3525) $69.96 [Enlarge Picture] Drag Link Tube, - 32-3\4in. long. O.D. 0.875. Includes clamps (on each end), For 9N, 2N, 8N (For complete tie rod assembly add front drag link ends 8N3270 AND rear drag link ends NAA33271A. (**BEFORE ORDERING: Measure your drag link tube length..p\n 8N33315 drag link tube was also used on these tractors..it is 34-1\2 inch long). (Part No: 8N3314D) $38.95 [Enlarge Picture] Steering Wheel - For 2N, 9N. 17 5\8 Diameter, 11\16 Keyed hub, replaces OEM# 2N3600. Looks just like original with bare spokes! For 9N and 2N. (Part No: R2090) $49.50 [Enlarge Picture] Steering Shaft & Nut Assembly - RH Spiral w\Single Bolt Sector Adjustor. For Models: 8N (1950->1952) (Part No: 8N3575B) $137.48 [Enlarge Picture] Spindle \ King Pin Repair Kit - For 8N, 2N, 9N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: Upper Spindle Seal C5NN3125A, Spindle Top Bushing 2N3109, Spindle Bottom Bushing 2N3109, and Thrust Bearing C0NN3123B. (Part No: S.65986) $22.50 [Enlarge Picture] Steering Shaft & Nut Assembly - For 8N 1948-49 with 4 Bolt Sector Adjustor - LEFT HAND SPIRAL. s\n less than 216989 (1948-1949). (Part No: 8N3575A) $170.28 [Enlarge Picture] Steering Wheel - Keyed, steel spokes. Wheel measures 17 1\2 inches in diameter, 3\4 inch hub, 4inch dish. Replaces E0NN3600AA (Part No: S.61373) $36.72 [Enlarge Picture] Drag Link End - Fits 8N 48-52 Used on front of drag link. Left Hand Threads. 3.375 long from center of post to end of large thread. Large thread diameter is .687in (11\16in.). (Part No: 8N3270) $9.74 [Enlarge Picture] Drag Link End, Rear - RH Threads. For Models: 2N, 8N, 9N, 2000 4Cyl 1962-64, 2031, 2120 1963-64, 2131, 4000 1962-63, 4031, 4120, 4131, 600, 601, 611, 620, 630, 631, 640, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 850, 860, 861, 871, 881, NAA, NAB. (Part No: NAA33271A) $13.90 [Enlarge Picture] Steering Shaft Bearing and Cup Assembly - QTY 2 - 1-3\4 OD. For Models: 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft\top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505) $34.95 [Enlarge Picture] Steering Shaft Bearing Cup - For models up to 1964 including: 8N late, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3552) $7.84 [Enlarge Picture] Steering Shaft Bearing - For models up to 1964 including: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3571-OE) $10.49 [Enlarge Picture] Steering Shaft Bearing Cup - For models 9N, 2N. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. Replaces B3552. (Part No: 6-TIM) $8.78 [Enlarge Picture] Steering Shaft Bearing - For models 9N, 2N. Replaces 683571A. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. (Part No: 5BC-TIM) $7.94 [Enlarge Picture] Steering Sector Gear Bushing - For models 9N, 2N. Price is for pair. Two halves needed per side. 2 pairs needed per tractor. Order 2 for complete tractor. (Part No: 9N3517) $15.92 [Enlarge Picture] Steering Sector Gear (RH) - For models 9N, 2N. (Part No: 9N3526) $147.18 [Enlarge Picture] Steering Sector Gear (LH) - For models 9N, 2N. (Part No: 9N3527) $147.18 [Enlarge Picture] Bearing And Cup Assembly - For models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft\top and bottom. (Part No: 8N3571-52) $8.59 [Enlarge Picture] Front Axle Assy W\ Bushing - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000(W\Manual 7-57\PS 55), 4000(W\Manual 7-57\PS 55). This axle is for models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. (Part No: D9NN3010EA) $167.00 [Enlarge Picture] Steering Column Retainer and Spring - For 9N, 2N. Steering Column Dust Seal and Spring. Exactly Like Original Spring and Seal. (Part No: 9N3699-9N3661) $8.95 [Enlarge Picture] Steering Column Collar - For 9N, 2N. Collar, retains dust seal in top of column. Exactly Like Original. WITHOUT GREASE FITTING HOLE. (Part No: 9N3669A) $7.59 [Enlarge Picture] Steering Column Collar w\Grease Fitting Hole - For 9N, 2N. Collar with grease fitting hole, retains dust seal in top of column. Exactly Like Original. WITH GREASE FITTING HOLE. (Part No: 9N3669B) $7.58 [Enlarge Picture] Drag Link End, Front - A= 3.875 , B= .687 , 18 Left Hand Thread, Manual Steering. For models 2N, 9N, 8N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1\62 to 12\64), 4000(1\62 to 12\64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1\16 of an inch longer. (Part No: NAA3270A) $10.24 [Enlarge Picture] Steering Wheel - 17-5\8 dia., 11\16 -13\16 keyed, 3 covered steel spokes. For Models: 9N, 2N 1939-1947. (Part No: 2N3600) $34.50 [Enlarge Picture] Steering Wheel, Splined Hub - Steering wheel OEM style, 17-1\2 diameter, 36-SPLINE hub. Metal spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA.(R2091) (Part No: 8N3600-OE) $52.14 [Enlarge Picture] Axle Hardware Kit 4 PCS. - Bolt kit, front axle bolt, nut & washer. Holds right and left axles to center axle. For tractors: 9N, 2N, 8N {1939-1952}. For 600, 700, 800, 900, NAA (Part No: 350789-KIT) $11.23 [Enlarge Picture] Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 5\8-18, CHROME PLATED. For tractors: 9N, 2N {1939-1947}. (Part No: 351103CC) $9.90 [Enlarge Picture] Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 11\16 -20. CHROME PLATED. For Models: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC) $3.93 [Enlarge Picture] Drag Link End, Front, RH Thread - End assembly, Front, .687-18 Right Hand thread, 3.187in. from center of post to end of large thread. For 2N, 9N. (Part No: 9N3270) $14.74 [Enlarge Picture] Steering Arm - For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 957E3130. (Part No: 310799) $45.95 [Enlarge Picture] Steering Sector - Right Hand - Has single gear (gear has 3 teeth followed by a wider spacer - followed by another 4 teeth ). Fits 8N s\n 216989 & up, NAA, Jubilee, 3600, 800, 601, 901, 2000, 4000, (1953 ->1964). If yours does not have 7 teeth, you can use this part but must replace both right and left sides. Shaft cover must be (late style), see picture. (Part No: 251294_) $144.38 [Enlarge Picture] Bushing - Bushing, steering gear sector {1-1\2 long}. For tractors: 8N, 8NAN to s\n 216988 {1948-1949}. {4 used} (Part No: 8N3576A) $6.72 [Enlarge Picture] Bushing - Bushing, steering gear sector {.84 long}. For tractors: 8N, 8NAN. NAA, NAB s\n 216988 & up. {2 used} (Part No: 8N3576B) $6.72 [Enlarge Picture] Grommet - Grommet, steering column to instrumental panel. For tractors: 8N {1948-1952}. (Part No: 8N3578) $5.59 [Enlarge Picture] Dust Cover - Dust cover, steering drag link rear ball joint cover. For tractors: 9N, 2N, 8N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5\8 inch hole, Large end is 1 7\16 inch inside diamter. (Part No: 9N3324) $6.73 [Enlarge Picture] Spindle Thrust Bearing - For Models: 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, Jubilee, SUPER DEXTA. (Part No: C0NN3123B) $7.55 [Enlarge Picture] Seal, Steering Gear, Sector Shaft - For Models: 8N s\n above 2616989 1948-1952, (NAA, Jubilee 600, 620, 630, 640, 650, 660, 800, 820, 840, 860, 2000, 4000, all 1953 -1964). (Part No: D5UZ3591B) $6.16 [Enlarge Picture] Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn style nut, 11\16 . Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S) $3.75 [Enlarge Picture] Steering Shaft Seat & Seal Kit - Upper - For 8N, NAA. This kit contains: 8N3570 Seal (Item 3), 8N3520 Spring (Item 4), 8N3518 Seat (Item 5), 8N3517 Bearing (upper) (Item 6). (Part No: 8N_STRKIT) $29.99 [Enlarge Picture] Steering Gear Assembly - Complete manual steering gear assembly fits late 8N (1949-52). (Part No: S.67077) $521.40 [Enlarge Picture] Front Axle Support Bushing - For 2N, 2000, 4000, 8N, 9N, 600, 700, 800, 900, NAA, Jubilee. Front axle bushing 1939-1964 with standard front axle. (Part No: 2N3039) $4.91 [Enlarge Picture] Spindle Nut - Fits on front spindles. Castle Nut 3\4in. x 16UNF. Fits: 9N, 2N, 8N, Dexta, Super Dexta, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: 387930S36) $1.14 [Enlarge Picture] Spindle Bushing Set - Price Shown is For One Must Order in Quantities of Four, 1.250 I.D., 1.370 O.D., 1.500 Long Fits Models 2N 39-47, 8N 48-52, 9N, NAA 53-54, Jubilee. (Part No: 2N3109) $3.42 [Enlarge Picture] Steering Shaft Bearing Cone - Fits 2N, 9N. (Part No: 4CB-TIM) $15.98 [Enlarge Picture] Steering Column Shim Kit - 2 x .005 , 2 x .010 , 2 x .020 . For Models: 8N w\ 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. (Part No: S.61623) $20.26 [Enlarge Picture] Gasket, Steering Gear Housing, Rear - For Models: 2N, 9N 1939-1947. (Part No: 9N3593B) $3.81 [Enlarge Picture] Gasket, Steering Gear Housing, Front - For Models: 2N, 9N 1939-1947. (Part No: 9N3594) $3.81 [Enlarge Picture] Dust Seal, Steering Arm - For Models: 2000, 3000, 4000, 600, 800, 8N, 900, NAA.Replaces C5NN3125A. (Part No: 8N3528) $3.00 [Enlarge Picture] Steering Sector Shaft Packing - 4 required per tractor. Minimum order quantity is 2. Price shown is for 1. For Models: 9N, 2N 1939-1947. (Part No: 9N3670) $4.11 [Enlarge Picture] Bushing, Steering Gear, Pitman Shaft - For Models: 8N, NAA 1949-1954. (Part No: 8N3553) $4.49 [Enlarge Picture] Drag Link Tube - 34.5 long. Uses one RH and one LH Tie Rod End. For Models: 9N, 2N, (Used on RH side on early 8N & LH side on late 8N), Dexta, Super Dexta.(**BEFORE ORDERING: Measure your drag link tube length..p\n 8N33314D drag link tube was also used on 9N, 2N and 8N tractors..it is 32-3\4in. long). (Part No: 8N33315) $29.85 [Enlarge Picture] Steering Wheel - 18 dia., 3\4 keyed, 4 covered steel spokes. For Model: 9N 1939-1940. (Part No: S.67507) $39.30 Steering Sector Shaft Seal - Felt seal comes in package of 2.Price is for pair. For Models: NAA, 8N 1948-1954. (Part No: 8N3586) $3.38 [Enlarge Picture] Steering Column Dust Seal - For Models: 9N, 2N. 1939-1957. (Part No: 9N3660) $5.08 [Enlarge Picture] Pin, Front Axle - OD 1.743in, ID 1.310in, L 4in. For models: 9N, 2N (s\n 164489 & up), 8N. (Part No: 2N3126D) $23.64 [Enlarge Picture] Pitman Arm (LH\RH) - Steering Gear Pitman Arm for models 8N (SN 216989 and up 1949-1952), NAA, 600, 700, 800, 900, 2000, 4000. Replaces NCA3590A. (Part No: 86542743) $85.27 [Enlarge Picture] Front Axle Pin - For Model: 2N up to s\n 167489. (Part No: 2N3126E) $46.38 [Enlarge Picture] Steering Wheel Nut, Black - Nut, steering wheel ACORN style. 5\8-18, Black. For tractors: 9N, 2N {1939-1947}. (Part No: 351103CCBlack) $4.50 [Enlarge Picture] Steering Wheel Nut, Black - Nut, steering wheel ACORN style. 11\16 -20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack) $3.75 [Enlarge Picture] Bearing Retainer - Steering Shaft Gear Thrust - For Models: 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Sold in quantities of 2 price is for 1. (Part No: 8N33581) $1.99 [Enlarge Picture] Pin, Radius Rod to Front Axle - For Model: 8N 1948-52. (Part No: 357623S8) $6.96 [Enlarge Picture] Steering Gear, Inner Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67672) $9.60 Steering Gear, Outer Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67673) $19.72 Steering Gear, Double Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67671) $63.78 Steering Gear, Single Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67670) $63.78 Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67668) $120.48 Steering Gear, Ball Bearing - 3\8 ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. 22 balls required per box, 11 for each bearing, price is per ball. (Part No: S.10903) $.63 Call 800-853-2651 to Order Or Click the "Buy" Button [ Return to Previous Page ]

Shopping Cart View Cart Checkout Phone Orders (800) 853-2651 Customer Service (360) 379-4808 Monday - Friday: 10:00 AM-6:30 PM EST Order online anytime! Your Shopping is Secure! Member of the Better Business Bureau

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us! We carry tractor parts and manuals for: Allis Chalmers, Case, Farmall, Ferguson, Ford, Fordson, International, International Harvester, John Deere, Massey Ferguson, Massey Harris, Oliver, and more. Products include: 3 Point Hitch parts, Alternators, Battery Accessories, Bearings, Belt-fan, Generator & Alternator, Brake Parts, Carburetor Repair Kits, Coils, Decals, Fenders, Generators, Hydraulic Cylinders, Ignition Kits, Manifolds, Mufflers, Paint, PTO Clutches, Radiators, Seals & Gaskets, Starter Drives, Starters, Tie Rod Ends, Tractor Gas Tanks, Tractor Seats, Water Pump Repair Kits, Water Pumps, Wheel Bearing Kits [Product Files] Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation Antique Tractor Headquarters All Rights Reserved TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.