FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 8N, 9N, 2N Tractor Electrical System

[ Return ]

Click here to see parts by model

Coil - Six Volt - For tractor models 8N (1939-1950), 9N, 2N with Front Mount Distributor. Order 9N12104 gasket set separately if mounting gasket is needed. (Item #: 105529, Ref. 9N12024) $23.20

Coil, 12-Volt - For 8N, 9N, 2N (serial number up to 263843. Front Mount Distributor 12 Volts. Order 9N12104 gasket set separately if mounting gasket is needed. Replaces 9N12024-12V. (Item #: 105530, Ref. 12VOLTCOIL) $24.00

Distributor Assembly, Complete - For 9N, 2N, (8N all front mount serial number up to 263843). Includes: points, condenser and distributor cap. Does not include coil or mounting gaskets. (Item #: 105325, Ref. 9N12100) $70.00

Distributor - For 8N serial number 263844 and up - side mount. This distributor works with D8NN12171AA point set (included). Electronic ignition not available at this time. (Item #: 105326, Ref. 8N12127B-WCR) $95.00

Voltage Regulator - For 8N - For Early Models with Front Mount Distributor, with generator. (Item #: 105536, Ref. 8N10505B) $30.00

Voltage Regulator 6 Volt - This Voltage Regulator has 3 terminals and is for an 8N with Side Distributor with generator. (Item #: 105536, Ref. 8N10505C) $30.00

12 Volt Conversion Kit, Front Mount Distributor - 8N, 9N, 2N. Updates older 6-volt tractors to 12-volt charging system. For 9N, 2N, (early 8N 1948-1951) with Front Mount Distributor (distributor is right behind radiator), to serial number 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, resistor, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. Note, using the brackets in this kit may require trimming of the conduit your spark plug wires run through. Many tractors no longer have this conduit. Will not work if you have a magneto. (Item #: 103139, Ref. 8NE10300ALT-C) $210.00

Spark Plug Wire Rubber Grommet - This Grommet is used to hold the #3 and #4 plug wires at the #3 plug. Originally used on 8N after serial number 263843 It replaces original part number 7RA12271 (Item #: 126685, Ref. 7RA12271) $3.10

Spark Plug Wire Grommet - Distributor Spark Plug Wire Grommet. Holds all 4 plug wires together. Tractors: 8N (serial number 263843 and up 1950-1952). (Item #: 126683, Ref. 7RA12297) $7.70

Distributor Cap Hold Down Clip - This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Item #: 178205, Ref. 7RA12144) $4.60

Electronic Ignition Conversion Kit, 6V Positive Ground - For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Item #: 105080, Ref. 1244AP6) $165.00

Distributor, Cam and Weights Assembly - Distributor Shaft with Cam and Weights attached for 9N12100 Front Mounted Distributor. For use on Ford tractor models 9N, 2N, and 8N before serial number 263843, 1939 to 1950. (Item #: 178579, Ref. 9N12187) $40.20

Distributor Shaft Assembly - Distributor Shaft Assembly. For use on models 8N after serial number 263844, 1950 thru 1952. Drilling is required for the pin holes to install the distributor gear and collar. (Item #: 178577, Ref. 8N12175) $13.70

Distributor Cam and Weight Assembly - Cam and Weight Assembly for 8N12127B-WCR original style Side Mount Distributor. For use on models 8N after serial number 263844, 1950 thru 1952. Note the direction of the weights in the picture. You may receive what is in the picture or you may receive the weights facing the opposite directions. They both work exactly the same. (Item #: 184159, Ref. 8N12176) $74.00

Starter Drive - New improved design Starter Drive, for 8N, 9N, 2N (1939 to 1952). (Item #: 110660, Ref. 52-11350C) $25.60

Generator Brush Set - This set is for original 3 brush Generators, used, 1939-1948. Replaces 40-10069, 40-10043 (Item #: 183025, Ref. 40-10069) $4.00

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Item #: 183576, Ref. A9AZ11102B) $8.50

Coil - Six Volt with Script - The is an officially licensed Ford 6 Volt Coil, with raised Ford script. Replaces 9N12024. Order 9N12104 gasket set separately if mounting gasket is needed. YTO 9N12024S (Item #: 182900, Ref. 9N12024S) $54.00

Coil - Six Volt - This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Item #: 183737, Ref. 8BA12029) $26.00

Starter, 12 Volt, With Drive - New Starter for 8N, 9N, 2N. 12 Volt. Complete starter includes starter drive. (Item #: 156607, Ref. 8N1100R) $105.00

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105079, Ref. 1244A) $140.00

Battery Cable - For 8N, 9N, 2N. Ground Strap. 7 inches. (Item #: 115790, Ref. D1NN14301H) $11.80

Battery Cable - For 8N 1948-1952, Jubilee, (NAA, 600, 700, 800, 900. All 1953 and later. Ground Strap. 6 volt, 11 inches long. (Item #: 115792, Ref. FAE14301B) $14.30

Battery Cable - This Battery Cable is 14 inches long and is 2 Gauge. For models (600, 700, 800, 900, 1958-1964), (2000, 4000 all before 1964). Ground Cable. (Item #: 172920, Ref. D1NN14301G) $13.80

$photo of For model 8N, 1939-1952. Starter to Battery Cable. 10.5 inches Long, 2 Gauge, 7\16 Diameter.$
Battery to Starter Cable - For model 8N, 1939-1952. Starter to Battery Cable. 10.5 inches Long, 2 Gauge, 7\16 Diameter. (Item #: 172636, Ref. 8N14300B) $16.30

Tune-up Kit, Basic - This Basic Ignition Tune-up Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune-up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Item #: 183923, Ref. 309787) $23.20

Distributor Cap - For tractor models 8N, 9N, 2N to serial number 263843 all with Front Mount Distributor. Distributor Cap. (Item #: 105526, Ref. 9N12106C) $13.50

Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Item #: 105710, Ref. 8NE10306) $3.90

Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Item #: 183039, Ref. 8N9004601A) $46.90

Resistor Assembly, Ignition Coil - For tractor models 9N, 2N. Resistor measures .5 ohms. (Item #: 111902, Ref. A8NN12250B) $19.00

$photo of For tractor models 8N to serial number 263844. Resistor measures .6 ohms +\- .1$
Resistor Assembly - For tractor models 8N to serial number 263844. Resistor measures .6 ohms +\- .1 (Item #: 111999, Ref. A8NN12250A) $16.20

$photo of For all Fords 1939 through 1964 except Dexta and Fordson Major with 3\4 inch hole. Keyed Ignition Switch comes with 2 Keys.$
Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3\4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Item #: 105687, Ref. 8N3679C) $7.70

Electronic Ignition Conversion Kit - 6V Positive Ground - Electronic Ignition Conversion Kit. For 8N, 9N, 2N with FRONT Mount Distributor only. For tractors with 6-volt POSITIVE ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. (Item #: 105082, Ref. 1247P6) $180.00

Electronic Ignition Conversion Kit, 12 volt negative ground - Electronic Ignition Conversion Kit - For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105081, Ref. 1247) $165.00

Electronic Ignition Conversion Kit -12V Negative Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 108154, Ref. 1247XT) $290.00

Electronic Ignition Conversion Kit - 6V Positive Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 6-volt positive ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Item #: 172506, Ref. 1247XTP6) $344.00

Distributor Cap, Clip Held - Fits Tractors: 8N serial number 263844 and above (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Item #: 100012, Ref. NCA12106A) $9.10

Starter Switch - For 9N serial number <12499 1939 to 1940. Starter Switch (push type). Replaces: 1996487 Delco, 405C Delco. (Not the same as Triangular 9N11450B 1940 to 1947) (TIS DR405C). (Item #: 105684, Ref. 9N11450A) $9.50

$photo of For Late 8N Tractors with side mount distributors (mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is used if you use your 6 volt coil - OR you can install a 12 volt coil (No coils included) and NOT use this resistor) wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts\Nuts\Instructions.$
12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors (mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is used if you use your 6 volt coil - OR you can install a 12 volt coil (No coils included) and NOT use this resistor) wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts\Nuts\Instructions. (Item #: 103140, Ref. 8NL10300ALT) $177.61

$photo of For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5\8 inches wide. The diameter varies from our different suppliers. This measures about 2 5\8 inches outside diameter, give or take about a 1\4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825.$
Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5\8 inches wide. The diameter varies from our different suppliers. This measures about 2 5\8 inches outside diameter, give or take about a 1\4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Item #: 172594, Ref. AFD5035) $19.40

Starter Repair Kit - For 8N, 9N, 2N. Starter Repair Kit contains all parts necessary for repair of starter part number 8N11001. (Item #: 178044, Ref. SRK401) $35.20

Starter Switch - With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Item #: 105685, Ref. 8N11500WG) $16.10

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Item #: 130072, Ref. AL437) $3.20

Spark Plug Wire Bracket - For tractor models 8N, 9N, 2N, (1939 to 1950). (Item #: 178132, Ref. 9N14564) $7.40

$photo of Fits 8N (Keyway). Shaft hole is approximately 0.67 inch (approximately 11\16 inch). Pulley outside diameter approximately 3-5\8 inches, inside diameter approximately 2 5\16 inches X 5\8 inches wide.$
Pulley Generator - Fits 8N (Keyway). Shaft hole is approximately 0.67 inch (approximately 11\16 inch). Pulley outside diameter approximately 3-5\8 inches, inside diameter approximately 2 5\16 inches X 5\8 inches wide. (Item #: 172557, Ref. 8N10130A) $16.64

Starter Solenoid, 6 Volt - This Starter Solenoid (Relay Assembly) for 6 volt Systems. For a more robust solenoid, use item # 156618. It has three posts and a saddle mount. For 8N, 1948-1952. (Item #: 105688, Ref. 8N11450) $10.60

Wiring Harness 12 Volt - For Late 8N side mount distributor tractors. 12 Volt Wiring Harness for those tractors converted to 12 Volts. This is main engine wiring only. (Item #: 155109, Ref. 8NL10301) $35.00

Starter, With Drive - Starter, with drive. For 8N, 9N, 2N, with 6 or 12 volt systems. (Item #: 113040, Ref. 8N11001) $120.00

Wiring Harness 12 Volt - Wiring Harness for 2N, early 8N, and 9N front mount distributors tractors that has been converted to 12 Volt. Does not include light wiring. There are many different ways to wire a 12 volt conversion and this is the wiring harness provided in our 12 volt conversions set. It may be different than how your 12 volt conversion was done if not done with our kit. (Item #: 164233, Ref. 8NE10301) $24.80

Alternator Adjustable Arm - Alternator Adjusting Arm. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Item #: 164212, Ref. 8NE10304) $13.80

Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire self exciting alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Item #: 111377, Ref. 8NE10305SE) $96.00

Alternator Base Bracket - Base Alternator Bracket. For 8N Late using Side Mount Distributors. (Item #: 172490, Ref. 8NL10303) $34.80

Pulley, Generator - Pulley, Generator (threaded). For 8N, 9N, 2N. (Item #: 111776, Ref. 9N10130B) $17.50

Distributor Breaker Plate - Breaker Assembly, complete with points. For 8N, 9N, 2N. For Front Mount Distributor. Please note that suppliers have been replacing distributors, distributor base assemblies and breaker plates with after market parts for some time and the mounting screw that comes into the side of the distributor is slightly higher. This may require some modification if your mounting screw does not line-up. (Item #: 116682, Ref. 9N12150) $30.50

Tune-up Kit, Basic - This basic tune-up kit for a 4 cylinder gas contains Premium Blue Streak points (A0NN12107ABS), rotor, condenser, and gauge for Front Mount Distributor on 2N, Early 8N, and 9N. (Item #: 185624, Ref. APN12000ABSR) $38.00

Generator Cut Out Assembly - Cut Out Assembly. For 9N, 2N. (Item #: 105534, Ref. B0NN10505A) $24.50

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models. (Item #: 105281, Ref. D4PE12029AA) $16.30

$photo of Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case\International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2.$
Coil, Ignition 12V - Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case\International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Item #: 105282, Ref. D8JL12029A) $16.00

Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. Replaces: 81826317, 86H14321A, C0NN14321A, C7NN14321A, S115407 (Item #: 126653, Ref. 86H14321A) $15.20

Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Item #: 126652, Ref. 8N11115) $8.10

Distributor Point Set - Point set, Blue Streak premium quality. For tractor models 8N, 9N, 2N (Early). (Item #: 178145, Ref. A0NN12107ABS) $26.50

Tune-up Kit, Basic - This basic tune-up kit has points, condenser and rotor for Front Mount Distributor. For 9N, 2N and Early 8N. (Item #: 105523, Ref. ATK6FFR) $14.60

Distributor Cap, Clip Held - Cap. Used ONLY on OLDER Tisco (Prestolite) replacement distributors (Through January 1987) for Late 8N with Side Mount Distributor. (Item #: 184762, Ref. IBK1009) $30.80

Coil Wire Assembly - This Coil Wire Assembly is just like the original used on 8N serial number above 263842 and NAA, Jubilee. It replaces original part number 7RA14302. (Item #: 182945, Ref. 7RA14302) $11.00

Distributor Drive Gear - For tractor models 8N, 9N, 2N. Gear for Distributor Drive On Camshaft (Item #: 163509, Ref. 7RA6255) $20.40

Spark Plug Wire Bracket - For tractors: 8N {1950-1952}. (Item #: 178052, Ref. 8N12112B) $12.40

Ignition Kit With Rotor - 4 Cylinder - Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Item #: 100011, Ref. ATK7FAR) $9.40

$photo of BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For early 8N, 9N, 2N. Measures .59 inches inside diameter and 1 3\8 outside diameter. Verify Measurements.$
Bearing, Generator Front - BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For early 8N, 9N, 2N. Measures .59 inches inside diameter and 1 3\8 outside diameter. Verify Measurements. (Item #: 108447, Ref. E27N10094B) $2.00

Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Item #: 105527, Ref. FAA12239A) $5.60

Cable, Starter to Switch - Switch to starter cable, 16 inches long. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Item #: 115783, Ref. 9N14431B) $10.30

Point Set - Point Set. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N Side Mount Distributors. (Item #: 179714, Ref. IGS2224LB) $9.70

Battery Hold Down - Bolt with nut. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 8N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126636, Ref. NCA10728WN) $7.00

Alternator Top Bracket - Alternator Top Mounting Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Item #: 164213, Ref. 8NE10302) $14.50

Alternator Base Bracket - Alternator Base Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Item #: 164211, Ref. 8NE10303) $14.40

Starter Copper Strap, Solenoid to Starter - Fits 8N. (Item #: 178208, Ref. 8N11518) $10.10

Generator, 6 Volt - New Generator with Pulley. For 8N, 9N, 2N. Single terminal, 6 Volt, 2 brushes. (Item #: 107888, Ref. 8N10000) $136.00

Spark Plug Wire Set, Custom - Premium Quality Wire Set for 8N with Side Mount Distributor. Zinc-coated plug terminals, modern low resistance core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 specifications. (Item #: 168257, Ref. 8N12259) $18.30

Distributor Gasket Kit - For tractor models 8N, 9N, 2N prior to serial number 263844. Kit contains distributor breaker cover gasket, distributor base gasket, distributor coil base gasket, cap gasket. Replaces: 9N12104, 91A12114, 9N12140A, 9N12143, 9N12276B (Item #: 111160, Ref. 9N12104) $3.70

Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 111317, Ref. C0NN12200A) $3.10

Condenser - Fits 8N, 9N, 2N with Front Mount Distributor. (Item #: 111199, Ref. A0NN12300A) $6.60

Condenser - For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Item #: 111198, Ref. FET12300A) $4.80

Distributor Rotor, Front Mount Distributor - Fits 8N, 9N, 2N with Front Mount Distributor. (Item #: 111103, Ref. B2NN12200A) $5.40

Terminal Block - For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Item #: 165423, Ref. 8NNN14448A) $13.35

Tune-up Kit - This Tune-up Kit is for tractor models 9N, 9N, 2N, and Early 8N, all with Front Mount Distributor. Tune-up Kit, Autolite. Includes: point set, condenser, rotor and (4) 437 Autolite Spark Plugs and gaskets. Verify correct spark plug size and type (Item #: 185192, Ref. 309786) $29.60

Wiring Harness - Has woven fabric casing. For 2N (1943 to 1947) with single pole generator. Also for 9N with single pole generator. Ignition Wiring. Replaces 86618153, 2N14401 and 9N14401C. (Item #: 105711, Ref. 2N14401) $16.90

Wiring Harness, 6 Volt - Has woven fabric casing. For 8N with Front Mounted Distributor and 2 wire generator, up to serial number 263843. Ignition Wiring Harness. (Item #: 105712, Ref. 8N14401B) $19.10

Wiring Harness, 6 Volt - For 8N Side Mount Distributor, serial number 263843 and up. Ignition Wire Harness. Replaces 8N14401C. (Item #: 105713, Ref. 8N14401C) $19.10

Generator, 6 Volt - Remanufactured, Round, 3 wire, keyed shaft. For model Late 8N (SN# 8N 263843 or later) 1950-1952. Pulley NOT included. There will be an additional core charge of $50 added to your order - this is refundable if you send your core to us. Replaces, 8N10001 8N10001LPR (Item #: 203503, Ref. 8N10001) $339.90

Distributor Point Set, 4-Cylinder - For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Item #: 111315, Ref. D8NN12171AA) $3.80

$photo of Fits 9N, 2N with Safety Start. 2-3\4 inches center to center.$
Starter Switch, Restoration Quality - Fits 9N, 2N with Safety Start. 2-3\4 inches center to center. (Item #: 105686, Ref. 9N11450B) $16.20

Battery Hold Down Bolt - Bolt with nut. For tractor models 8N, NAA (1948-1954). (Item #: 178014, Ref. 8N10728WN) $10.30

Distributor Cap Terminal Kit - Distributor Cap Terminal kit for 8N, 9N, 2N with Front Mount Distributor Electronic Ignition Conversion Kit. (Item #: 182553, Ref. 1247XTTERM) $25.90

Distributor Cap with Pertronix Coil Modification - Pertronix Distributor Cap for 8N, 9N, 2N with Front Mount Distributor THAT HAS BEEN CONVERTED TO AUTOMOTIVE STYLE KIT WITH A PERTRONIX 1247XT KIT. (Item #: 182562, Ref. 1247XTCAP) $43.10

Distributor Cap Spring Clip Set - For tractor models 8N, 9N, 2N (Early). Replaces 9N12144. (Item #: 168684, Ref. 9N12144) $4.00

Distributor Breaker Plate Retainer Clip - For tractor models 8N, 9N, 2N (Front Mounted Distributor). (Item #: 119700, Ref. 91A12146) $4.40

Battery Cable - 2 gauge. For tractor models 9N, 2N (from 1940). This cable is a battery to starter and is 21 inches long. (Item #: 172373, Ref. 9N14300C) $21.30

$photo of Clip for 7\16 inch hole. Electric wiring to instrument panel support bracket 1948-1952. 1 required, main wiring assembly to instrument panel brace 1 required, wiring to hood top reinforcement 1950-1952. 3 required. For model 8N (1948-1952).$
Clip - Clip for 7\16 inch hole. Electric wiring to instrument panel support bracket 1948-1952. 1 required, main wiring assembly to instrument panel brace 1 required, wiring to hood top reinforcement 1950-1952. 3 required. For model 8N (1948-1952). (Item #: 178034, Ref. 51C14197) $7.00

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Item #: 126654, Ref. 8N11113) $5.10

Rubber Grommet - Rubber Grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Item #: 178174, Ref. 11A14605) $2.30

Wiring Harness, Restoration Quality - Main Wiring Assembly with Ignition Light Wire. Original style braiding with soldered terminals. Made in the USA. For tractor models 9N, 2N with single terminal generator. Replaces 9N14401B. (Item #: 183785, Ref. 9N14401B) $106.00

Wiring Harness, Restoration Quality - Complete Wiring Harness including light wires and a diagram, 6 Volt. Original style braiding with soldered terminals. Made in the USA. For model 8N up to serial number 263843 with Front Mount Distributor. (Item #: 185392, Ref. 8N14401B-OE) $270.72

Distributor Rotor Clip - For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Item #: 110785, Ref. 8N12213) $3.60

Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 to 1964, 4000 to 1964, 6000 to 1964. (Item #: 182496, Ref. GRK401) $38.70

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Item #: 111464, Ref. 8N12209) $5.90

Distributor Drive Gear - For 8N with Side Mount Distributor, tractor serial number 263844 and above. (Item #: 186561, Ref. 7RA12390C) $36.70

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Item #: 183738, Ref. 350032-KIT) $7.40

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Item #: 182949, Ref. B12145) $1.30

Starter Solenoid, 12 Volt - This Starter Solenoid (Relay Assembly)will work for 6 or 12 volt applications. It has three posts and a saddle mount. For 8N, 1948-1952. Replaces 8N11450 (Item #: 156618, Ref. 8N11450-12V) $13.30

Electronic Ignition Replacement Module - This is a replacement module for the 1247XT electronic ignition kit. Does not have the magnetic sleeve for the rotor shaft. For front mount distributor. (Item #: 182570, Ref. 1247XT0) $107.00

Tune-up Kit - Replace all the ingition components at once. This kit contains Condenser (A0NN12300A), points (A0NN12107A), plugs (AL437), distributor cap (9N12106C), rotor (B2NN12200A), spark plug wire set (CPN12259) and .015 and .025 feeler gauges. Used on Ford 9N, 2N and 8N up to serial number 263843. (Item #: 116745) $54.00

$photo of <UL> <li>For Ford tractor model 8N (s\n 263844-earlier)<\li> <li>Replaces Ford OEM number 8N10505C, 8N10505B, GR276<\li> <li>Replaces manufacturer number 8050-506<\li> <li>3 Terminal: Battery - Armature - Field<\li> <li>6 Volt Regulator comes complete with mounting plate and hardware<\li> <li>10-12 output amperage<\li> <li>For Regulator w\o Mounting Bracket use Item #: 105536<\li> <\UL>$
Voltage Regulator - 6 Volt - 3 Terminal - w\ Mounting Bracket - For Ford tractor model 8N (s\n 263844-earlier) Replaces Ford OEM number 8N10505C, 8N10505B, GR276 Replaces manufacturer number 8050-506 3 Terminal: Battery - Armature - Field 6 Volt Regulator comes complete with mounting plate and hardware 10-12 output amperage For Regulator w\o Mounting Bracket use Item #: 105536 (Item #: 105535) $36.40

$photo of <UL> <li>For Ford tractor models 2N, 8N (s\n 263844-earlier), 9N (all w\ front mount distributor)<\li> <li>Replaces Ford OEM number 9N12140A<\li> <\UL>$
Distributor Coil Gasket - For Ford tractor models 2N, 8N (s\n 263844-earlier), 9N (all w\ front mount distributor) Replaces Ford OEM number 9N12140A (Item #: 107071) $0.80

$photo of <UL> <li>For Ford tractor models 2N, 8N (s\n 263843-earlier), 9N<\li> <li>Replaces Ford OEM number 9N12250<\li> <li>Resistor only (no mounting block)<\li> <\UL>$
Resistor - For Ford tractor models 2N, 8N (s\n 263843-earlier), 9N Replaces Ford OEM number 9N12250 Resistor only (no mounting block) (Item #: 110783) $10.60

$photo of <UL> <li>For Ford tractor models 2N, 8N (s\n 263844-earlier), 9N<\li> <li>Replaces Ford OEM number A0NN12107A, 21A151, 9N12107<\li> <li>Ventilated style - for models with front mount distributors<\li> <\UL>$
Point Set - For Ford tractor models 2N, 8N (s\n 263844-earlier), 9N Replaces Ford OEM number A0NN12107A, 21A151, 9N12107 Ventilated style - for models with front mount distributors (Item #: 111197) $8.90

$photo of <UL> <li>For Ford tractor models NAA, 8N (s\n 263844-later), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140<\li> <li>Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040<\li> <li>Replaces Ford OEM number 7RA12233<\li> <li>For 4 cylinder models<\li> <\UL>$
Distributor Bushing - For Ford tractor models NAA, 8N (s\n 263844-later), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140 Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040 Replaces Ford OEM number 7RA12233 For 4 cylinder models (Item #: 111466) $3.30

No
Picture
Distributor Cap Gasket - For Ford tractor models 2N, 8N (s\n 263844-earlier), 9N Replaces Ford OEM number 91A12114 For front mount distributors (Item #: 111623) $3.10

$photo of <UL> <li>For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all 4 cylidner gas)<\li> <li>Replaces Ford OEM number 309787<\li> <li>Includes point set, condenser, rotor button, spark plugs, distributor cap and wire set<\li> <\UL>$
Complete Tune-up Kit - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all 4 cylidner gas) Replaces Ford OEM number 309787 Includes point set, condenser, rotor button, spark plugs, distributor cap and wire set (Item #: 116748) $57.00

$photo of <UL> <li>For Ford tractor model 9N (Through 1942)<\li> <li>Replaces Ford OEM number 9N10728C, 9N10748<\li> <li>Sold as Pair<\li> <li>Comes primered (color may vary). Prior to painting check fitment<\li> <li>For right hand side use Item #: 191179<\li> <\UL>$
Battery Hold Down Set - For Ford tractor model 9N (Through 1942) Replaces Ford OEM number 9N10728C, 9N10748 Sold as Pair Comes primered (color may vary). Prior to painting check fitment For right hand side use Item #: 191179 (Item #: 126468) $56.00

$photo of <UL> <li>For Ford tractor models 2N, 9N<\li> <li>Replaces Ford OEM number 9N12283, 9N12286<\li> <li>Copper Core<\li> <\UL>$
Spark Plug Wire Set - For Ford tractor models 2N, 9N Replaces Ford OEM number 9N12283, 9N12286 Copper Core (Item #: 155162) $22.20

$photo of <UL> <li>For Ford tractor model 8N (s\n 263844-earlier with front mount distributor)<\li> <li>Replaces Ford OEM number 9N12287B<\li> <li>Copper Core<\li> <\UL>$
Spark Plug Wire Set - Front Mount Distributors - For Ford tractor model 8N (s\n 263844-earlier with front mount distributor) Replaces Ford OEM number 9N12287B Copper Core (Item #: 155166) $19.00

$photo of <UL> <li>For Ford tractor model 8N (s\n 263845-later with side mount distributor)<\li> <li>Replaces Ford OEM number 9N12287B<\li> <\UL>$
Spark Plug Wire Set - Side Mount Distributors - For Ford tractor model 8N (s\n 263845-later with side mount distributor) Replaces Ford OEM number 9N12287B (Item #: 155167) $18.70

$photo of <UL> <li>For Ford tractor model 8N (s\n 263844-later)<\li> <\UL>$
Alternator Mounting Bracket - For Ford tractor model 8N (s\n 263844-later) (Item #: 164223) $15.30

$photo of <UL> <li>For Ford tractor model 8N (s\n 263844-later)<\li> <li>Steel<\li> <li>6mm Thick<\li> <li>10.5mm Unthreaded Hole<\li> <li>12.9mm Unthreaded Hole<\li> <li>8.7mm x 91mm Slot<\li> <\UL>$
Alternator Adjuster Bracket - For Ford tractor model 8N (s\n 263844-later) Steel 6mm Thick 10.5mm Unthreaded Hole 12.9mm Unthreaded Hole 8.7mm x 91mm Slot (Item #: 164224) $17.60

$photo of <UL> <li>For Ford tractor model 8N (s\n 263844-later)<\li> <li>Steel<\li> <li>6mm Thick<\li> <li>8.2mm Unthreaded Hole<\li> <li>9mm x 92mm Slot<\li> <li>Additional Handling and Oversize Fees Apply To This Item<\li> <\UL>$
Alternator Adjuster Arm Bracket - For Ford tractor model 8N (s\n 263844-later) Steel 6mm Thick 8.2mm Unthreaded Hole 9mm x 92mm Slot Additional Handling and Oversize Fees Apply To This Item (Item #: 164225) $9.10

$photo of <UL> <li>For Ford tractor model 8N (s\n 263844-later)<\li> <li>Number of Wires: 6<\li> <\UL>$
Alternator Conversion Wiring Harness - For Ford tractor model 8N (s\n 263844-later) Number of Wires: 6 (Item #: 164240) $26.90

$photo of <UL> <li>For Ford tractor models 2N, 8N, 9N<\li> <li>Replaces Ford OEM number 8N11001, 8N1101R, 8N11002, 9N11001, 9N11002, 10461663<\li> <\UL>$
Starter, Gear Reduction - For Ford tractor models 2N, 8N, 9N Replaces Ford OEM number 8N11001, 8N1101R, 8N11002, 9N11001, 9N11002, 10461663 (Item #: 167399) $251.00

No
Picture
Starter - Ford Style DD - For Ford tractor model 9N Replaces Ford OEM number 9N11002 Ford Early Inertia Direct Drive Volts: 6V Rotation: CW Teeth: 9 (Item #: 167404) $691.00

$photo of <UL> <li>For Ford tractor models 2N, 8N (s\n 263844-earlier with front mount distributor), 9N<\li> <li>Replaces Ford OEM number 9N12100<\li> <li>Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit<\li> <li>For New Distributor use Item #: 105526<\li> <\UL>$
Distributor, Remanufactured, 9N12100 - For Ford tractor models 2N, 8N (s\n 263844-earlier with front mount distributor), 9N Replaces Ford OEM number 9N12100 Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit For New Distributor use Item #: 105526 (Item #: 203508) $247.01

Search Parts for:

Category:

In:

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy