Low Prices - Fast Shipping - Thousands of Items in Stock!

Secured by SSL	Order online or call (800) 853-2651

• Tractor Parts • Manuals • Videos & DVDs • Hats • Books Featured Item    I&T Shop Manuals • Contact Us • Shipping Rates • Return Policy • Ordering Help • Company Info • Parts Warranty • Tractor Info    (YT Home)

Ford - Model 8N Parts [ Show All Pictures ] [Return to List of Ford Models] Brakes [Show Picture]   Brake Backing Plate Felt Seal - For Models: 8N, NAA, Jubilee. (Part No: 8N2217) $2.59 [Show Picture]   Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255) $69.90 [Show Picture]   Brake Drum Repair Kit - For Models: 8N, NAA Jubilee. Replaces: 8N2027B Contains: Anchor (2), H2041 Adjuster Screw, 8N2217 Felt Backing Plate Seal, 8N2048 Adjuster Socket, 8N2223 Adjuster Nut, 8N2049 Adjuster Spring, 8N2297B Return Spring, 8N2299 Secondary Spring LH only. Brake Hardware Kit for 1 wheel. (Part No: 8NAA2250) $29.23 [Show Picture]   Brake Drum - For 8N, NAA, Jubilee. An additional $7.00 will be added to shipping per drum (heavy item).(22#) (Part No: 8N1126) $103.46 [Show Picture]   Brake Shoes - Brake Shoes For 8N, NAA, Jubilee - Set of 4. (Part No: 8N2200B) $47.41 [Show Picture]   Bushing - Brake cross shaft bushing. Press into transmission housing. For tractors: LATE 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477) $5.59 [Show Picture]   Bushing - Bushing, brake cross shaft. Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side} For tractors: 9N, 2N, EARLY 8N {1939-1949}. (Part No: 782477) $6.82 Clutch [Show Picture]   Clutch Alignment Tool - 1-3\8 inch, 10 spline, .670 inch pilot. For Models with single clutch: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: S.70930) $8.49 [Show Picture]   Clutch Disc, New - 9" Clutch Disc, Hub-1 3\8 inch, Splines-10, 6 springs. Fits: 9N, 2N, 8N, NAA (4 speed), NAB, Jubilee, 600, 700, 800, 900 (to serial # 14257), 1800, 2130. Improved from original by added springs. Also replaces NAA7550A. (Part No: 91A7550WHD) $37.93 [Show Picture]   Clutch Kit, 9 Inch, Single Clutch - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. 9" Clutch & Pressure Plate Kit For single clutch models, 3 & 4 speed transmission. Contains NEW: clutch pressure plate, disc, release bearing, pilot bearing and alignment tool. (Part No: 8N7563K) $125.95 [Show Picture]   Clutch Pedal Arm Bushing - For models 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002" I.D. x 1-1\2" long. Minimum Order Qty is 2. (Part No: 8N7508B) $5.43 [Show Picture]   Clutch Pedal Shaft Bushing - 7\8 Inch inside diameter. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A) $5.21 [Show Picture]   Clutch Release Arm Kit - For 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm Kit contains: eyebolt #355584S8, pin #8N7533, and clutch release arm #8N7511B. (Part No: S.66657) $48.60 [Show Picture]   Pilot Bearing - For Models: 9N, 2N, 8N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A) $5.49 [Show Picture]   Pressure Plate - 9in. single, flat flywheel. For Models: 1800, 2130, 2N, 8N, 9N, NAA, NAB, Jubilee, 600, 700, 800, 900 w\ single clutch. (Part No: 8N7563) $69.90 [Show Picture]   Release Bearing Hub - For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 8N, 900, 901, 950, 951, 9N, NAA, Jubilee, NAB. (Part No: 9N7561) $20.42 [Show Picture]   Release Bearing - For Ford Tractors with 9" and 10" Single Clutch 1939-1964. (Part No: 78-7580A) $20.50 Cooling System [Show Picture]   Fan Belt - For Models: 2N, 9N, 8N EARLY with front mount distributor. Length is 44 1\8 inches. Alternator belt for those tractors using our 12 volt conversion kit. (Part No: 9N8620B3-SL) $7.10 [Show Picture]   Fan Belt - For Models: 9N, 2N, 8N prior to S\N 263844 using generator and have front Mount distributor. Not for tractors with alternator conversion. This belt is 46-1\8" long. (Part No: 9N8620B3) $9.00 [Show Picture]   Fan Belt - Notched belt is 41 3\8 inches long. For models 8N late (with side mount distributor), NAA (1952-1954, Jubilee. This belt also works with # 8NL10300ALT Alternator conversion kit. (Part No: 8N8620) $5.26 [Show Picture]   Fan Blade - 4 Blade - For Models: 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125" Centers. Diameter is 15.75". (Part No: 8N8600A) $43.27 [Show Picture]   Fan Blade - 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D) $74.23 [Show Picture]   Fan Shroud - For 9N, 2N, 8N. Fan Shroud, Metal. Will not fit new replacement radiators. Will fit original radiators only. (Part No: 2N8146) $59.92 [Show Picture]   Gasket, Water Pump Cover - For 9N, 2N, 8N (Part No: 9N8507) $1.48 [Show Picture]   Radiator Cap, Black - For 9N, 2N, 8N with pressurized system. Winged Radiator Cap. (Part No: 2N8100A) $5.04 [Show Picture]   Radiator Cap, Chrome - For Models: 9N, 2N, 8N with pressurized system. Winged Radiator Cap, Chrome. (Part No: S.61615) $10.49 [Show Picture]   Radiator Cap - Plain, conventional type 4 psi pressure cap, less ornament. For tractors 9N, 2N, 8N. (Part No: 2N8100A-LW) $7.36 [Show Picture]   Radiator Drain Tap - Drain Tap-For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. This is also the same tap for the engine block in the 9N, 2N, 8N, NAA engines. (Part No: C9NN8115A) $3.56 [Show Picture]   Radiator Hood Pad - For Models: 9N, 2N, 8N. (Part No: 2N8032) $2.14 [Show Picture]   Radiator Hose Set - 8N S\N 263844 and above. Lower Radiator Hose #8N8286 and Upper Radiator Hose #2N8260. (Part No: 8NL-HOSESET) $10.00 [Show Picture]   Radiator Hose Set - 9N, 2N, 8N S\N 263842 and below. Upper Radiator Hose #2N8260 and Lower #312588. (Part No: EARLY-HOSESET) $9.25 [Show Picture]   Radiator Hose, Lower - Hose, radiator to outlet lower. For Model: Late 8N. (Part No: 8N8286) $6.17 [Show Picture]   Radiator Hose, Lower - Hose, water pump to radiator lower. Hose is 1 1\2 inch inside diameter.``For Models: 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, Early 8N, 900, 901, 9N, NAA. (Part No: 312588) $5.90 [Show Picture]   Radiator Hose, Upper - Hose, cylinder head to radiator upper. For tractors 9N, 2N & 8N (Part No: 2N8260) $5.00 [Show Picture]   Radiator Mounting Pads - Package of 2. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. (Part No: 180705M1) $5.90 [Show Picture]   Radiator, Restoration Quality - This radiator is made like the original with a curved top tank (less cap), 4 rows of tubes. Copper core. For 9N, 2N, 8N. Draincock included. Meets or exceeds original manufacturers specification for cooling. 1 year warranty. (Part No: 8N8005-R) $277.97 [Show Picture]   Radiator - Heavy Duty. 4 Rows of tubes. Our Very High Quality radiator for 9N, 8N, and 2N tractors. Comes with draincock and for a limited time *FREE Winged Radiator Cap (p\n 2N8100A-black). Copper core. Heavy duty for ultimate cooling in hot weather: Weighs 6 lbs more than our 8N8005-C radiator (Wt 22 lbs). 1 year warranty. (Part No: 8N8005) $196.68 [Show Picture]   Radiator - High Quality Radiator for 9N, 2N, 8N. Copper Core, 3 rows of tubes, weight 16 lbs. Draincock included. 1 year warranty. (less cap). (Part No: 8N8005-C) $129.00 [Show Picture]   Thermostat - 160 degree lo-temp. For tractors 9N, 2N, 8N. Fits in upper radiator hose, 2.250" long. (Part No: B2NN8575A) $30.40 [Show Picture]   Water Pump Kit - Repair kit. For 2N, 8N, 9N, NAA, Jubilee (Part No: CPN8591B) $30.51 [Show Picture]   Water Pump - For Models: 9N, 2N, 8N. Comes with Rear Cover Plate and Gasket. (Part No: CDPN8501A) $48.91 Decals and Emblems [Show Picture]   Decal Set - Combination Decal Set For Models 8N, 9N & 2N (1939-1952). Set of 10 self adhesvie decals. Contains Decals for Air Cleaner, Oil Filter, Position Control, PTO Warning, Hood Sides (Red Ford Name 2-1\4" x 5-1\4"), Fenders (Red Ford name 3-1\4" x 9")and Tachometer. Printed on Vinyl. (Part No: R2008) $29.95 [Show Picture]   Decal Set - For 8N, 2N, 9N, all 1939-1947. Decal set for the Air Cleaner, Oil Filter Position (2) and PTO Warning. (Part No: FO1) $4.65 [Show Picture]   Decal Set - For 8N, 2N, 9N. Decal for Fenders (2). Each decal is approx 8-3\4in. wide by 3-1\4in. tall. (Part No: R2006_) $9.78 [Show Picture]   Decal, Fear This Ford - 12-1\2 x 3. For all Ford tractors. (Part No: S.67825) $18.08 [Show Picture]   Decals, Hood Set - For Models: 8N, 2N, 9N, 1947-1952. Hood Decals (2) Red Ford Script. (Part No: R2005_) $7.72 [Show Picture]   Ford Script Painting Mask - Includes 1 small 5-3\8" x 2-1\4", and 1 large 8-5\8" x 3" painting masks. For Model: 8N. Application directions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.61441) $20.14 [Show Picture]   Hood Emblem - 8N (bright metal with red enamel background). (Part No: 8N16600A) $36.97 [Show Picture]   Hood Emblem - 8N One piece emblem, includes 350836-S32 speed nuts. Cast aluminum, dull finish with red outline and lettering. (Part No: 8N16600B) $27.48 [Show Picture]   Plate - Patent data plate, with drive screws to install. For tractors: 8N, {1948-1952}. (Part No: 8N14001) $7.16 Drive Train [Show Picture]   Axle Bearing Assembly - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. This includes rear axle bearing(2N4221) and cup(9N4222). (Part No: S.18516) $42.95 [Show Picture]   Axle Clamp Lock Nut - Clamp lock nut, rear axle, 1-1\4". For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21) $24.24 [Show Picture]   Axle Kit - Kit contains, 2 rear axle shaft bearings, 2 inner seals, 2 washers, 2 housing gaskets, 2 shaft bearing cups, 2 inner oil seals, 1 pr outer oil seal assemblies, 2 nut & lock rings, 2 shaft gaskets. For Model: 8N (Part No: AXLEKIT-8N) $171.60 [Show Picture]   Axle Kit - Kit contains, 2 shaft bearings, 2 housing gaskets, 2 shaft collars, 2 bearing cups, 2 housing gaskets, 2 outer seal assemblies, 2 rear axle rings. For Models: 9N, 2N, 8N 1948. Kit comes with 2 sets of outer axle seals one for use on 9N, 2N tractors and one for 8N. (Part No: AXLEKIT-8NEARLY) $165.78 [Show Picture]   Axle Nut & Snap Ring - Kit, nut & snap ring. For Models: 8N, NAA. (Part No: CBPN4179A) $5.77 [Show Picture]   Axle Oil Seal, Inner - For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290) $.99 [Show Picture]   Axle Oil Seal - For models 8N to S\N 486753. Rear axle oil seals. Comes in qty of 2. (Part No: A8NN4251A) $24.96 [Show Picture]   Axle Outer Retainer Gasket - Requires 2. For Models: 8N 1948-1950. (Part No: 8N4225) $1.56 [Show Picture]   Axle Outer Retainer - For Model: 8N to S\N number 486753. Rear Axle Outer Retainer. This retainer comes with seal and gasket. Set of 2. (Part No: A8NN4248A) $26.46 [Show Picture]   Axle Ring - For 8N 1948-1953, Jubilee & NAA. (Part No: 8N4187) $1.36 [Show Picture]   Axle Seal, Inner Pair - Seal, Oil For 8N, JUBILEE, NAA.Enter QTY 1 For PKG of 2. (Part No: 8N4233A) $6.82 [Show Picture]   Axle Seal, Outer Pair - For Models: 8N S\N 486753 UP, NAA, Jubilee. Comes in pairs. (Part No: D5NN4115A) $10.28 [Show Picture]   Axle Shaft Bearing - Rear Axle Shaft Bearing, Tapered Cone. (Part No: 2N4221) $41.44 [Show Picture]   Axle Shaft Gasket - For Models: 600, 700, 800, 900, 8N, NAA, Jubilee. ID = 2 inch, OD = 2 1\4 inch. (Part No: 8N4284) $2.98 [Show Picture]   Axle Shaft Nut - 1.25", 18 hex. For Models: (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179) $4.86 [Show Picture]   Axle Washer - For model 8N. (price shown is for EACH, minimum Qty is 2. (Enter '2' in QTY box. ) (Part No: 8N4293) $2.48 [Show Picture]   Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. **$15 ADDED TO SHIPPING DUE TO WEIGHT** (Part No: 8N4235C) $139.90 [Show Picture]   Bolts 2 Per PKG - Hood bolt kit, hood side panel to axle support bolt, nut & washer kit with dog point EXACT OF ORIGINAL. For tractors: 9N, 2N, 8N, {1939-1952}. (Part No: 350782-KIT) $6.90 [Show Picture]   Countershaft - Fits 8N. (Part No: 8N7111) $127.15 [Show Picture]   Differential Gasket Kit, 6 Pieces - Fits 9N, 2N, 8N. 6 Piece Set. Includes: (1) 9N502, (1) 9N611, (2) 2N4035, (1) C5NN747A, (1) 9N4662, (1) 181217M3 (Part No: DGK928) $6.70 [Show Picture]   Differential Pinion Bearing Cone - For Models: 2000 1965>, 2N 1939-52, 3000 1965>, 4110 1965>, 600 W\4 SP. TRANS. SN<54165 - 1958, 5 SP. SN<196155 - 1959, 601 W\4 SP. TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 8N 1939-52, 9N 1939-52, DEXTA 1957-1964, NAA 1953-54. (Part No: BB4221B) $22.84 [Show Picture]   Differential Pinion Bearing Cup, Front - For Models: 2N 1939-52, 8N 1939-52, 9N 1939-52, DEXTA 1957-4\1962, NAA, Jubilee 1953-54. (Part No: BB4616B) $23.55 [Show Picture]   Differential Pinion Bearing Cup - Bearing cup, differential bearing For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, DEXTA, JUBILEE, NAA (Part No: BB4222) $7.45 [Show Picture]   Differential Pinion Cone, Front - Bearing, Tapered Cone. For Models: 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, DEXTA 1957-4\1962, NAA, Jubilee 1953-1954. (Part No: BB4621B) $30.95 [Show Picture]   Gasket, Differential Center Housing, Side Cover - For Models: 2N, 8N, 9N. Price is for each. (Part No: 9N4131) $.99 [Show Picture]   Gasket, Gear Shift Cover Plate - For 4-SPEED transmissions. For Models: 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Price is for each. (Part No: 8N7223) $2.50 [Show Picture]   Gasket, Gear Shift Cover Plate - For all models with 5-SPEED transmission built between 1955-1964.***Must be ordered in multiples of 5.*** (Part No: NDA7223A) $2.52 [Show Picture]   Gasket, Main Drive Gear Bearing Retainer - For Models: 9N, 2N, 8N, NAA, Jubilee, NAB. Sold in quantities of 2. Price is for 1. (Part No: 9N7086) $0.52 [Show Picture]   Gasket, Paper Shim, For Bearing Retainer - Fits Ford 9N, 2N, 8N, NAA & Jubilee, Replaces #9N4130 & #8N4229 ``Note: (Use for seal between bearing retainer and axle housing or backing plate. Use in multiples to replace shims #8N4229. Price is for each. (Part No: 9N4130) $.99 [Show Picture]   Gasket,, Rear axle housing gasket - Gasket center housing to rear axle housing. Tractors: 9N, 2N, 8N. (Part No: 2N4035) $2.00 [Show Picture]   Gear Shift Lever, w\ Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 3\8in. UNF thread for the shift knob (knob included) (the older shift levers had 5\16in. UNF thread). Note: uses gear shift knob p\n BB7213A. Fits: 8N, NAA, Jubilee, 600, 700, 800, 900, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B) $67.90 [Show Picture]   Gear Shift Pin - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000(>1965 (w\3 & 4 Speed transmission). (Part No: 9N7221B) $3.25 [Show Picture]   Gear, 1st, 4 Speed Transmission - 60\28 tooth. For Models: 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100) $200.14 [Show Picture]   Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-64), 8N (1948-52). 17 teeth. (Part No: B9NN7114A) $106.40 [Show Picture]   Gear, 3rd, 4 Speed Transmission - 52 tooth. For Models: 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All w\ 4 speed transmissions. (Part No: 8N7102) $182.70 [Show Picture]   Gear, 4th, 4 Speed Transmission - Has 28 & 36 teeth. For Models: 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112) $227.75 [Show Picture]   Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B) $97.32 [Show Picture]   Gears, 2nd Mainshaft & Countershaft, 4 Speed Transmission - For 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 cyl engines & 4 speed transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set) $154.54 [Show Picture]   Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171) $64.06 [Show Picture]   Main Shaft Connecting Coupling - For Models: 2000, 3000, 8N, NAA, Jubilee all with 4 Speed Transmission. Main Shaft Connecting Coupling has 21 teeth, 16 spline. (Part No: E6NN7106AA) $50.65 [Show Picture]   Oil Seal, Main Drive Gear - Oil Seal For 3 & 4 Speed transmission Main Drive Gear on: 9N, 2N, 8N, 600, 700, 800, 900, NAA, NAB, Jubilee. **Minimum order qty is 2** (Part No: 8N7052A) $3.06 [Show Picture]   Shift Knob - Knob, transmission gear-shift lever. For all 4- & 5- speed transmission models (1950-1964 s\n 252844 & up). (Part No: BB7213A) $2.99 [Show Picture]   Shifter Boot - Bottom hole is 7\8in. dia. For 2N, 9N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be use to replace 9N7277. (Part No: C5NN7277C) $1.85 [Show Picture]   Shifter Boot - Transmission gear shift lever boot. For tractors: 8N, NAA. Bottom hole in boot is 1-1\2in. (Part No: 8N7277) $7.16 [Show Picture]   Thrust Washer, Transmission - 2" O.D. For Models: 8N, NAA. (Part No: 8N7149) $5.16 [Show Picture]   Thrust Washer, Transmission - 2.16" O.D, 1.75" I.D. For Model: 8N. (Part No: 8N7148) $5.16 [Show Picture]   Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066) $6.30 [Show Picture]   Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067) $6.88 [Show Picture]   Transmission Case to Center Housing Gasket - For Models: 9N, 8N, 2N. (Part No: 9N4662) $1.50 [Show Picture]   Transmission Drain Plug - Has 2.5 in. outside diameter. For tractors: 9N, 2N, 8N, NAA, {1939-1954}. Also filler plug for tractor:NAA {1953-1954}. Gasket available as p\n 8N7011. Please specify in comments section if needed. (Part No: 9N7010) $7.83 [Show Picture]   Transmission Rebuild Kit - For Models: 9N, 2N and 8N with 3 & 4 speed transmissions (1939-52). This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK3952) $94.85 Electrical System [Show Picture]   12 Volt Conversion Kit, Front Mount Distributor - 9N, 2N, 8N - Updates older 6-volt tractors to 12-volt charging system. For early 9N, 2N, 8N 1948-1951 with front mount distributor (distributor is right behind radiator), to S\N 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. (Part No: 8NE10300ALT-C) $142.70 [Show Picture]   12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: 1. Unicharge alternator w-pulley, 2. Electrical resistor, (Resistor is to be used if you use your 6 volt coil - OR you can install a 12 volt coil (no coils included in kit) and NOT use this resistor, 3. wiring harness, 4. top alternator bracket, 5. base alternator bracket, 6.alternator adjusting arm, 7. Misc Bolts\Nuts\Instructions. (Part No: 8NL10300ALT) $133.72 [Show Picture]   Alternator Adjustable Arm - Alternator adjusting arm. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10304) $26.36 [Show Picture]   Alternator Adjustable Arm - Alternator adjusting arm. For 8N Late with Side Mount Distributor. (Part No: 8NL10304) $26.14 [Show Picture]   Alternator Base Bracket - Alternator Base Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10303) $34.95 [Show Picture]   Alternator Base Bracket - Base alternator bracket. For 8N Late using side mount distributors. (Part No: 8NL10303) $31.92 [Show Picture]   Alternator Top Bracket - Alternator Top Mounting Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10302) $29.95 [Show Picture]   Alternator Top Bracket - Top alternator bracket. For 8N late with side mount distributor. (Part No: 8NL10302) $28.95 [Show Picture]   Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire 'self exciting' alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 8NE10305SE) $87.73 [Show Picture]   BACK UP ALARM - Universal - Alarm, electronic back up H.D. triple function sound level. 97, 107, & 112 decibels, 12-36 volt systems. Meets SAE J994 type A, B, & C specifications, 6" (152mm) mounting centers. Width: 7.2" (183mm), height: 4" (102mm), Depth 4" (102mm). (Part No: BA112) $147.90 [Show Picture]   Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. (Part No: 86H14321A) $13.43 [Show Picture]   Battery Cable - For 2N, 8N, 9N. Ground Strap. 7" long. (Part No: D1NN14301H) $7.86 [Show Picture]   Battery Cable - For 8N 1948-52, Jubilee, (NAA, 600, 700, 800, 900, all 1953 and later. Ground Strap. 6 volt, 11" long. (Part No: FAE14301B) $8.91 [Show Picture]   Battery to Starter Cable - For Model: 8N, 1939-1952. Starter to Battery Cable. 10.5" Long, 1Gauge, 7\16 Diameter. (Part No: 8N14300B) $7.16 [Show Picture]   Bearing, Generator Front - BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For 2N, 8N, 9N (Part No: E27N10094B) $5.53 [Show Picture]   Breaker Plate Retainer Clip - For Models: 9N, 2N, 8N. (Part No: 91A12146) $2.80 [Show Picture]   Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A) $47.62 [Show Picture]   Coil - Six Volt - For Models: 8N (1939-1950), 2N, 9N with Front Mount Distributor (Part No: 9N12024) $29.53 [Show Picture]   Coil - Twelve Volt - For 9N, 2N, 8N (S\N up to 263843. Front Mount Distributor 12 Volts (replaces 9N12024-12V) (Part No: 12VOLTCOIL) $27.95 [Show Picture]   Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Chrome 'Flame Thrower' high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $28.67 [Show Picture]   Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $28.67 [Show Picture]   Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $32.34 [Show Picture]   Condenser - Fits 9N, 2N, 8N with front mount distributor. (Part No: A0NN12300A) $3.65 [Show Picture]   Condenser - For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FET12300A) $2.99 [Show Picture]   Distributor Assembly, Complete - For 9N, 2N, (8N all front mount S\N up to 263843). Includes: Points, condenser & Distributor Cap. Does not include coil or mounting gaskets. (Part No: 9N12100) $201.90 [Show Picture]   Distributor Base Assembly - Front mount distributor base assembly, with clamps & rear bushing. For Models: 2N, 8N, 9N. (Part No: 9N12139) $79.61 [Show Picture]   Distributor Bushing, FRONT - Front bushing is for FRONT MOUNT DISTRIBUTOR only. **MINIMUM ORDER QTY IS 2 price each **. For 9N, 2N, early 8N. (Part No: 9N12120) $2.02 [Show Picture]   Distributor Bushing, REAR - Bushing, (rear), for front mount distributor, 9N, 2N, 8N. MINIMUM ORDER QTY IS 2 price each. (Part No: 18-12132) $3.10 [Show Picture]   Distributor Cam and Weight Assembly - Cam and weight assembly for 8N12127B-WCR original style Side-mounted distributor. For use on models 8N after s\n 263844, 1950 thru 1952. (Part No: 8N12176) $73.89 [Show Picture]   Distributor Cap Terminal Kit - Distributor Cap Terminal kit for 2N, 9N, 8N with front mount distributor Electronic Ignition Conversion Kit. (Part No: 1247XTTERM) $17.62 [Show Picture]   Distributor Cap, Clip Held - Cap. Used ONLY on OLDER Tisco (Prestolite)replacement distributors (Through January 1987) for Late 8N side mount. (Part No: IBK1009) $14.51 [Show Picture]   Distributor Cap, Clip Held - Fits Tractors: 8N S\N 263844(Side mount), 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 Series (4 Cylinder) (Part No: NCA12106A) $6.90 [Show Picture]   Distributor Cap - Distributor Cap for 2N, 9N, 8N with front mount distributor that has been converted to Electronic Ignition. (Part No: 1247XTCAP) $27.95 [Show Picture]   Distributor Cap - For Models: 9N, 2N, 8N to #263843 all with front mount distributor. Distributor Cap. (Part No: 9N12106C) $10.70 [Show Picture]   Distributor Clip Kit - For Models: 9N, 2N, 8N. (Part No: 9N12144) $4.30 [Show Picture]   Distributor Coil Bail - For Models: 9N, 2N, 8N w\ front mount distributor. (Part No: 9N12137) $2.80 [Show Picture]   Distributor Gasket Kit - For models 9N, 8N prior to s\n 263844, and 2N. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104) $2.32 [Show Picture]   Distributor Point Set, 4-Cylinder - For FDN12127A & 311185 distributor used on NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: D8NN12171AA) $5.37 [Show Picture]   Distributor Point Set - Point set, ventilated, Blue Streak premium quality. For Models: 2N, 8N, 9N. (Part No: A0NN12107ABS) $11.20 [Show Picture]   Distributor Rotor, Front Mount Distributor - Fits 9N, 2N, 8N with front mount distributor. (Part No: B2NN12200A) $3.52 [Show Picture]   Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N w\side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: C0NN12200A) $3.20 [Show Picture]   Distributor Rotor - Rotor. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N side mount Distributors. (Part No: IGP1016D) $11.66 [Show Picture]   Distributor Shaft Assembly - Distributor shaft assembly. For use on models 8N after s\n 263844, 1950 thru 1952. Drilling is required to install distributor gear. (Part No: 8N12175) $69.05 [Show Picture]   Distributor Shaft, Cam and Weights Assembly - Distributor shaft with cam and weights attached for 9N12100 front mounted distributor. For use on Ford tractor models 9N, 2N, and 8N before s\n 263843, 1939 to 1950. (Part No: 9N12187) $73.92 [Show Picture]   Distributor, Breaker Plate - 4 Cylinder. Breaker plate with points & condensor. For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FAD12152A) $23.08 [Show Picture]   Distributor - For 8N serial #263844 and up - side mount. (Part No: 8N12127B-WCR) $179.90 [Show Picture]   Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor) , NAA, Jubilee, 600, 700, 501, 601, 701, 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A) $70.06 [Show Picture]   Electronic Ignition Conversion Kit - 6V Positive Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 6-volt positive ground only. This electronic module replaces your points and condenser, also includes coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1247XTP6) $159.38 [Show Picture]   Electronic Ignition Conversion Kit - 6V Positive Ground - Electronic Ignition Conversion Kit - For 2N, 9N, 8N with FRONT mount distributor only.For tractors with 6-volt POSITIVE ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. (Part No: 1247P6) $94.19 [Show Picture]   Electronic Ignition Conversion Kit - 6V Positive Ground - For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6) $77.30 [Show Picture]   Electronic Ignition Conversion Kit -12V Negative Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247XT) $152.15 [Show Picture]   Electronic Ignition Conversion Kit -12V - Electronic Ignition Conversion Kit - For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247) $86.94 [Show Picture]   Generator, 6 Volt - For Models: 9N, 2N, 8N 1939-1950. Remanufactured Generator. Pulley NOT included 4 3\4" O.D. housing, 2 brush, 3 terminal, keyed shaft. Refundable $51.00 core charge will be added to your order. (Part No: 8N10000BR) $249.23 [Show Picture]   Generator, 6 Volt - New generator with pulley for 2N, 9N, 8N, (2000, 3000, 4000 prior to 1965). Single terminal, 6 Volt. (Part No: 8N10000) $119.00 [Show Picture]   Generator, 6 Volt - Remanufactured, Round, 3 wire, keyed shaft. For Model: 8N 1950-1952. Pulley NOT included. Please Call for Availability. (Part No: 8N10001) $215.68 Generator, 6 Volt - Remaufactured, 2 wire, threaded shaft w\ pulley. For Model 8N 1947-48. (Part No: 8N10000A) $181.65 [Show Picture]   Ignition Kit - 4 Cylinder - Ignition kit, less rotor. Contains points, gauge, and condenser. For models 1950 to 1964. For 2000, 4000, 600, 6000, 6100, 700, 800, 8N, 900, NAA (Part No: ATK7FA) $4.88 [Show Picture]   Ignition Kit With Rotor - 4 Cylinder - Ignition kit contains: points, rotor, condensor. For 8N (side mount distributor), NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. For models from 1950 to 1964 (4 Cylinder). Also for TISCO 8N12127-WCR distribution. (Part No: ATK7FAR) $6.30 [Show Picture]   Ignition Kit With Rotor, Front Mount Distributor - Premium quality Blue Streak ventilated points (A0NN12107ABS), rotor, condenser, and gauge For 2N, Early 8N, 9N. (Part No: APN12000ABSR) $16.01 [Show Picture]   Ignition Kit - Ignition kit, less rotor. Contains points, gauge, and condenser. For 2N, 8N, 9N (Part No: ATK6FF) $7.26 [Show Picture]   Ignition Switch, Keyed - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3\4 inch hole. Keyed Ignition Switch comes with 2 keys (Part No: 8N3679C) $12.20 [Show Picture]   Ignition Tune Up Kit, Basic, 4-Cylinder Gas - For Models: NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). Tune Up Kit, Autolite. Kit contains: D8NN12171AA Point Set, FET12300A Condenser, CONN12200A Rotor & Spark Plugs. (Part No: 309787) $14.00 [Show Picture]   Ignition Tune Up Kit, Comprehensive, 4-Cylinder Gas - For 8N (S\N 263844 & up), NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 , 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and spark plugs. (For use with original equipment distributors). (Part No: TUNEKIT) $29.99 [Show Picture]   Ignition Tune Up Kit, Front Mount Distributor - For Models: 2N, 8N, 9N, all with Front Mount Distributor. Tune Up Kit, Autolite. Includes: Point set, Condenser, Rotor & (4) 437 Autolite Spark Plugs and gaskets. (Part No: 309786) $20.68 [Show Picture]   Ignition Tune-Up Kit, Comprehensive, Front Mount Distributor - For 9N, 2N, 8N, using front mount distributors to S\N 263843. Complete Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, heat range matched spark plugs. Note: If your 8N has an angle mounted distributor refer to #TUNEkit instead. (Part No: 2N9NTUNEKIT) $39.99 [Show Picture]   Point Set - Point set. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N side mount Distributors. (Part No: IGS2224LB) $3.93 [Show Picture]   Pulley Alternator , Wide - For use with our 12 Volt Conversion kits that use the 10SI style alternator only. Replaces the narrower pulley (3\8ths aprox)on tractors with a wider crankshaft pulley (3\4 inch). (Part No: AFD5035) $15.90 [Show Picture]   Pulley Generator - Fits 8N (Keyway). Shaft hole is approx 0.67in. Pulley outer diameter approx 3-5\8in. (Part No: 8N10130A) $41.78 [Show Picture]   Pulley Generator - Generator pulley (threaded). For 2N, 8N, 9N, (Part No: 9N10130B) $40.09 [Show Picture]   Resistor Assembly - For Models 8N to s\n 263844. Resistor measures .6 ohms +\- .1 (Part No: A8NN12250A) $22.66 [Show Picture]   Resistor - For 2N, 9N, 8N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in ignition system, resistance = 3.0 ohms. (Part No: 8NE10306) $4.95 [Show Picture]   Spark Plug Wire Bracket - ****SOLD IN MULTIPLE OF 2, PRICE SHOWN IS PER BRACKET**** For models 9N, 2N, 8N, (1939 to 1950). (Part No: 9N14564) $5.43 [Show Picture]   Spark Plug Wire Bracket - For tractors: 8N {1950-1952}. (Part No: 8N12112B) $5.59 [Show Picture]   Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442) $12.68 [Show Picture]   Spark Plug Wire Set, Custom - Premium quality leads fit 8N with side mount distributor. (Part No: 8N12259) $20.20 [Show Picture]   Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $19.28 [Show Picture]   Spark Plug Wire Set, Universal, 4 Cyl. - For Models: NAA, Jubilee, NAB, 9N, 2N, 8N, 2030, 2120, 2130, 2131, 4030, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: CPN12259) $9.78 [Show Picture]   Spark Plug, Bosch - Replaces Autolite AL437, AL82 and Champion H14Y and H18Y. For Models: 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). Price is for EACH. Minimum Order is 4. (Part No: 3000-6000) $3.00 [Show Picture]   Spark Plug - For 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). SPARK PLUG. Price is for EACH. Minimum Order is 4. (Part No: AL437) $2.06 [Show Picture]   Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115) $8.39 [Show Picture]   Starter Copper Strap, Solenoid to Starter - Fits 8N. (Part No: 8N11518) $2.10 [Show Picture]   Starter Drive - New improved design starter drive, for 9N, 2N, 8N (1939 to 1952). (Part No: 52-11350C) $36.75 [Show Picture]   Starter Drive - Original Style For 8N, 2N, 9N (Part No: R2325) $30.30 [Show Picture]   Starter Repair Kit - For 9N, 2N, 8N. Starter Repair Kit contains all parts necessary for repair of starter #8N11001. (Part No: SRK401) $7.51 [Show Picture]   Starter Solenoid - 6 Volt - For 8N, 1948-1952. Starter Solenoid, 6 Volt. (Part No: 8N11450) $8.98 [Show Picture]   Starter Switch - with mounting gasket. Fits: 8N (1948-1952);all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. (Part No: 8N11500WG) $27.92 [Show Picture]   Starter, 12 Volt, With Drive - New Starter for 9N, 2N, 8N. 12 Volt.Complete starter includes drive mechanism. (Part No: 8N1100R) $139.00 [Show Picture]   Starter, 6 Volt, Less Drive - Starter, less drive. For 2N, 8N, 9N, with 6 volt systems. Restoration quality. (Part No: 8N11001) $99.95 [Show Picture]   Starter, 6 Volt, With Drive - New Starter for 9N, 2N, 8N. 6 Volt.Complete starter - includes drive mechanism. Replaces OEM # 8N11001R. (Part No: 8N11001WD) $129.00 [Show Picture]   Terminal Block - For Models: 8N 1950-52, Jubilee, NAA, (2000, 4000 up to 1964), 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 8NNN14448A) $9.45 [Show Picture]   Voltage Regulator - For 8N - For Early Models with Front Mount Distributor (Part No: 8N10505B) $33.90 [Show Picture]   Voltage Regulator - For 8N - Side Distributor, with generator. (Part No: 8N10505C) $27.84 [Show Picture]   Wiring Harness 12 Volt - For Late 8N. 12 Volt Wiring Harness for those tractors converted to 12 Volts. This is main engine wiring only. (Part No: 8NL10301) $43.23 [Show Picture]   Wiring Harness 12 Volt - Wiring harness for 2N, Early 8N, and 9N that has been converted to 12 Volt. Does not include light wiring. (Part No: 8NE10301) $43.53 [Show Picture]   Wiring Harness, 6 Volt - Has woven fabric casing. For 8N Side mount distributor, s\n 263843 and up. Ignition wire harness. (Part No: 8N14401C_) $21.80 [Show Picture]   Wiring Harness, 6 Volt - Has woven fabric casing. For 8N with front mounted distributor and 2 wire generator, up to s\n 263843. Ignition wiring harness. (Part No: 8N14401B_) $22.82 Engine Bearings [Show Picture]   Main Bearing Set, .010 - .010" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633E-010) $44.60 [Show Picture]   Main Bearing Set, .020 - .020" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633G-020) $44.60 [Show Picture]   Main Bearing Set, .030 - .030" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633-030) $52.68 [Show Picture]   Main Bearing Set, .040 - .040" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For Models: 2N, 8N, 9N. (Part No: MBK9N633-040) $51.94 [Show Picture]   Main Bearing Set, .060 - 1 kit used per engine. Contains center, front, and rear bearings. For models 2N, 8N, and 9N. (Part No: MS-120P-060) $54.90 [Show Picture]   Main Bearing Set, STD - Standard main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633A-STD) $44.60 Rod Bearing Pair, .001 - For Models: 2N, 8N, 9N. Sold in quantities of 4, priced individually. (Part No: 9N6211B-PAIR) $5.92 Rod Bearing Pair, .002 - For Models: 2N, 8N, 9N. Sold in quantities of 4, priced individually. (Part No: 9N6211C-PAIR) $5.92 Rod Bearing Pair, .010 - For Models: 2N, 8N, 9N. Sold in quantities of 4, priced individually. (Part No: 9N6211E-PAIR) $6.72 Rod Bearing Pair, .020 - For Models: 2N, 8N, 9N. Sold in quantities of 4, priced individually. (Part No: 9N6211G-PAIR) $6.72 Rod Bearing Pair, .030 - For Models: 2N, 8N, 9N. Sold in quantities of 4, price is for 1. (Part No: 9N6211-030-PAIR) $6.72 Rod Bearing Pair, .040 - For Models: 2N, 8N, 9N. Sold in quantities of 4, priced individually. (Part No: 9N6211-040-PAIR) $6.72 Rod Bearing Pair, Std - For Models: 2N, 8N, 9N. Sold in multiples of 4, priced individually. (Part No: 9N6211A-PAIR) $5.92 [Show Picture]   Rod Bearing Set, .010 - .010" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 2N, 8N, 9N, (Part No: CRK9N6211E-010) $22.90 [Show Picture]   Rod Bearing Set, .020 - .020" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211G. For 2N, 8N, 9N, (Part No: CRK9N6211G-020) $25.90 [Show Picture]   Rod Bearing Set, .030 - .030" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211-030. For 2N, 8N, 9N, (Part No: CRK9N6211-030) $25.90 [Show Picture]   Rod Bearing Set, .040 - .040" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211-040. For 2N, 8N, 9N, (Part No: CRK9N6211-040) $25.90 [Show Picture]   Rod Bearing Set, STD - STD connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 2N, 8N, 9N. (Part No: CRK9N6211A-STD) $22.90 [Show Picture]   Rod Bearing Set - For 9N, 2N, 8N. .060 Rod Bearing Set for 1 engine. (Part No: CB-200P-060) $36.90 Engine Gaskets Crankshaft Seals - Not available separately. Sold with the Oil Pan Gasket Set. (Part No: See Oil Pn Gskt) $0.00 [Show Picture]   Distributor Breaker Cover Gasket - For models 9N, Early 8N, 2N. Sold in quantities of 10, price is for 1. (Part No: 9N12276) $1.00 [Show Picture]   Distributor Gasket kit - For models 9N, 8N prior to s\n 263844, and 2N. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104) $2.32 [Show Picture]   Exhaust Manifold Gasket - SINGLE gasket (TWO gaskets required) for exhaust manifold on 9N, 2N, 8N. (Part No: 9N9448) $2.50 [Show Picture]   Full Gasket Set - Full Engine Overhaul Gasket Set with metal head gasket. For Models: 9N, 2N, 8N. (Part No: 8N6008M) $28.74 [Show Picture]   Gasket, Oil Pan Drain Plug - Fits 9N, 2N, 8N. (Part No: 8N6734) $.99 [Show Picture]   Governor Housing Mounting Cover Gasket - For Models: 9N, 2N, 8N. (Part No: 9N6022) $1.52 [Show Picture]   Head Gasket - Head gasket, all metal. For 2N, 8N, 9N (Part No: 8N6051B) $7.24 [Show Picture]   Head Gasket - Head gasket. All soft material except for the fire rings. For Models: 2N, 8N, 9N. (Part No: 8N6051A) $7.24 [Show Picture]   Oil Pan Gasket Set - For 9N, 2N, 8N; through 1964. 7 Piece Set. Oil Pan Gasket Set with upper and lower crankshaft rope seals, left and right oil pan gaskets, and oil pan drain plug gasket. (Part No: 9N6781) $14.04 [Show Picture]   ROPE SEAL - Crankshaft rope seal, rear, lower for 2N, 8N, 9N.Sold in multiple of 2 priced each. (Part No: 8N6702) $1.90 [Show Picture]   Rope Seal - Crankshaft rope seal, rear, upper for 2N, 8N, 9N. Sold in multiple of 2 priced each. (Part No: 8N6701) $1.90 [Show Picture]   Timing Gear Front Cover Gasket - For Model: 8N s\n 263844 and up. (Part No: 8N6020C) $1.25 [Show Picture]   Timing Gear Front Cover Gasket - For Models: 9N, 2N, (8N prior to s\n 263844). (Part No: 9N6020A) $1.59 [Show Picture]   Timing Gear Side Cover Gasket - For Models: 9N, 8N, 2N. (Part No: 8N6018) $1.50 [Show Picture]   Upper Gasket Set - For Models: 8N, 9N, 2N. Upper Gasket Set with Metal Head Gasket. (Part No: VG8NM) $20.72 [Show Picture]   Valve Cover Gasket - Price is for each, minimum order quantity is 2. For Models: 2N, 8N, 9N. (Part No: 7HA6521) $1.10 Engine Overhaul Kits [Show Picture]   Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic in frame kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. Bearings are available, must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BIFF106A) $185.57 [Show Picture]   Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic in frame kit contains, thin wall .040" sleeves 4 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. For Models: 2N, 8N, 9N. (Part No: BIFF102A) $193.63 [Show Picture]   Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Kit contains thin wall .040" sleeve, 3 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. Kit does not include bearings. For Models: 2N, 8N, 9N. (Part No: BIFF103A) $190.57 [Show Picture]   Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4cylinder gas 3-3\16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. Bearings are available, must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BIFF105A) $193.03 [Show Picture]   Basic Overhaul Kit With Bearings - For 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains: pistons & sleeves, rings, pin & retainers, pin bushings, complete gasket kit. Rod and Main bearing sets (Specify size of: STD, .010, .020, .030, .040 in 'COMMENTS' when ordering). For Models: 2N, 8N, 9N. You need to specify the following in 'COMMENTS' when ordering: #1. Three or Four Ring Pistons; #2. Sleeve Wall Thickness (.040 or.090); #3. MAIN Bearing Size of STD, .010, .020, .030, .040. #4 ROD bearing Size of STD, .010, .020, .030, .040 . (Part No: OK120) $290.79 [Show Picture]   Basic Overhaul Kit, 120 Gas, 3-ring pistons, .040 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF103A-LCB) $213.87 [Show Picture]   Basic Overhaul Kit, 120 Gas, 3-ring pistons, .090 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF106A-LCB) $213.87 [Show Picture]   Basic Overhaul Kit, 120 Gas, 4-Ring Pistons, .090 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF105A-LCB) $218.09 [Show Picture]   Basic Overhaul Kit, 120 Gas, 4-ring Pistons, .040 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For 2N, 8N, 9N. (Part No: BEKF102A-LCB) $198.56 Comprehensive Overhaul Kit - GUIDE - TO DETERMINE WHICH OF THE BELOW KITS YOU WILL NEED, YOU NEED TO KNOW THE FOLLOWING: (1) If your pistons have 3 or 4 rings per piston. (2) If your piston sleeve thickness is .040 or .090 inches. (3) If your oil pump gear is 3\4 or 9\16 inches wide. (4) If you have rotating or non-rotating exhaust valves - If your keepers or keys on the exhaust and intake valves are the same, you DO NOT have rotating valves. If your keepers or keys on the exhaust and intake valves are the different, you DO have rotating valves. Engine bearings can be ordered from our ENGINE BEARINGS category. (Part No: FORD COMP KIT) $0.00 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas, 4-ring Pistons, .090 Sleeves - 4 RING PISTONS, .090 SLEEVES, 9\16 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, timing gear, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. Bearings NOT included & must be ordered separately. For, 2N, 8N, 9N. NOTE: Please indicate in 'COMMENTS' if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: 4-9H-LCB) $439.35 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas - 3 RING PISTONS, .090 SLEEVES, 3\4 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit. Contains, thick wall .090" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket set, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in 'COMMENTS' if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 3-8H-LCB) $416.88 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore, 3\4" gear width. Complete engine kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, guide retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carburetor kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: 4-8T-LCB) $439.02 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore, 3\4" oil pump gear width, Complete engine kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: 3-8T-LCB) $416.88 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore, 3\4" oil pump gear width. Complete engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: 4-8H-LCB) $439.02 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore, 9\16" gear width. Complete engine kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, guide retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, point & condenser, spark plugs, oil filter, basic carburetor kit. Bearings NOT included & must be ordered separately. For 2N, 8N, 9N. NOTE: Please indicate in comment section if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: 4-9T-LCB) $439.35 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore, 9\16" oil pump gear width. Complete engine kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. Bearings NOT included & must be ordered separately. For, 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: 3-9H-LCB) $418.08 [Show Picture]   Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore, 9\16" oil pump gear width. Complete engine kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pins, retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: 3-9T-LCB) $418.08 [Show Picture]   Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Engine overhaul kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket set, intake & exhaust valves, valve springs & retainers, guides & retainers, valve keys. Bearings NOT included & must be ordered separately. For 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: EOK106-LCB) $298.65 [Show Picture]   Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Engine overhaul kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake & exhaust valves, valve springs & retaineres, guides & retainers, valve keys. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: EOK105-LCB) $309.37 [Show Picture]   Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Engine overhaul kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake & exhaust valves, valve springs & retainers, guides & retainers, valve keys. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: EOK103-LCB) $298.65 [Show Picture]   Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Engine overhaul kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake & exhaust valves, valve springs & retainers, guides & retainers, valve keys. Bearings NOT included & must be ordered separately. For 2N, 8N, 9N. NOTE: Please indicate in "comments" if you have rotating valves, $50 will be added to the order. If your keepers or keys on the exhaust or intake valves are the same, you do NOT have rotating valves. If they are different you DO. (Part No: EOK102-LCB) $279.92 [Show Picture]   Lucas Assembly Lube - Lucas Assembly Lube (8 oz). Designed to used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing Perfect for engine lding, ``Super slick and tacky, Easy to use, Excellent rust inhibitor, Excellent for long term storage, Contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $6.49 [Show Picture]   Valve Overhaul Kit - Made by TISCO. Fits 9N, 2N& 8N that use solid valve guides and have NON-rotating exhaust valves. Includes Intake & exhaust valves, springs, keys, and guides. (Part No: VOKF928N) $94.88 [Show Picture]   Valve Overhaul Kit - Made by TISCO. For servicing one engine when valve replacement is necessary. For 9N, 2N, 8N with solid guides, free-rotating exhaust valves. Kit contains intake valves, exhaust valves, valve springs and keys, solid type valve guides and rotating valve kit. (Part No: VOKF928NFR) $150.82 Engine Parts [Show Picture]   Camshaft - Re-ground - Camshaft, Re-ground, Ford 2N, 9N, 8N with front mount distributor. NO CORE charge. For bolt on style timing gear. (Part No: 2N6250B) $133.76 [Show Picture]   Camshaft - For press on gear. Fits 8N S\N 263843 and greater using SIDE mount distributor. (Part No: 8N6250) $126.87 [Show Picture]   Crankshaft Pulley - Crankshaft pulley for Ford 9N, 2N, 8N tractors. Crankshaft mounting is 1.63 OD and 1.18 in. ID. and has four 1\4"-20 threaded holes for hub when being used with front mounted loader. Can be used with or without loader. Replaces 2N6312. Used with part #'s 192161 and 194354. (Part No: 192160) $49.05 [Show Picture]   Crankshaft Pulley - For Ford 9N, 2N, 8N tractors. Supplied with four rubber bushings for hub with 11\32 pins when being used with front mounted loader. (Part No: 192152) $65.26 [Show Picture]   Crankshaft - NEW KIT WITH BEARINGS. For Models: 9N, 2N, 8N With STD Rod And Main Bearings. (Part No: 9N6303ACK) $522.54 [Show Picture]   Crankshaft - NEW crankshaft for models 9N, 8N, 2N. Does not include bearings. (Part No: 9N6303A) $432.30 [Show Picture]   Crankshaft - Reground With Bearings. Fits Ford 8N, 2N, 9N. Reground Crankshaft. A refundable $50.00 core charge will added to your order. (Part No: 1198019) $424.00 [Show Picture]   Cylinder Head - For 2N, 8N, 9N all GAS 1939-52. Cylinder Head. Additional $10.00 shipping will be added to your total due to weight. (Part No: 8N6050A) $184.33 [Show Picture]   Distributor Drive Gear - For Models: 8N (early), 2N, 9N. Gear for Distributor Drive (front mount distributor). (Part No: 7RA6255) $18.62 Distributors and Distributor Parts - These are located in the Electrical System parts section. (Part No: DISTRIBUTORS) $0.00 [Show Picture]   Governor Centrifugal Assembly - Governor internal centrifugal assembly, fits 9N18200C or 8N18204B above, for 9N, 2N, 8N (1939 thru 1952). (Part No: 9N8N18179CA) $159.90 [Show Picture]   Governor Compensating Spring - 4.95" length. For Model: 8N. (Part No: 8N9827) $4.50 [Show Picture]   Governor Dust Seal - Replacement Governor dust seal. For Models: 2N, 8N, 9N. (Part No: 9N18183) $4.58 [Show Picture]   Governor Housing - Governor Housing includes needle bearing, Lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 9N, 2N, 8N tractors built 1939 thru 1952. (Part No: 8N18085) $102.18 [Show Picture]   Governor Lower Race Assembly Bearing - For Models: 2N, 8N, 9N. (Part No: 9N18186B) $42.48 [Show Picture]   Governor Needle Bearing - For Models: 2N, 8N, 9N. (Part No: 9N18182) $6.36 [Show Picture]   Governor Repair Kit - Basic - For 9N, 2N, 8N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5\8 inch). (Part No: BOK12502) $39.90 [Show Picture]   Governor Repair Kit - Complete - For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or w\o proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5\8 inch), bushings, mounting gasket, dust seal, C-clip. (Part No: CAPN12502A) $114.97 [Show Picture]   Governor Shaft - Shaft assembly, with or w\o proofmeter. For 2N, 8N, 9N. (Part No: 9N8N18187A) $40.44 [Show Picture]   Governor - Complete governor assembly, 2 arm, for 8N (1948 through 1952 with proofmeter drive). (Part No: 8N18204B) $299.98 Piston Rings - These are located in the ENGINE RINGS category. (Part No: ENGINE RINGS) $0.00 Pistons and Sleeves - Pistons and Sleeves are located in the "Pistons and Sleeves category" Use your "BACK" key and select this category. (Part No: Various) $100.00 [Show Picture]   R Seal Retainer - Retainer, for rear crankshaft oil seal. For Models: 2N, 8N, 9N. (Part No: 91A6335) $25.74 [Show Picture]   Rod w\Bushing, Reconditioned - Fits 9N, 2N, 8N all with Gas. Reconditioned Piston Rod with Bushing. (Part No: 1201581) $72.12 [Show Picture]   Starter Flywheel Ring Gear - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. (Part No: 9N6384) $28.82 [Show Picture]   Timing Gear Cover - For 8N with Side Mount Distributor (Part No: R0595) $66.22 [Show Picture]   Timing Gear, Camshaft - For Bolt-on type camshafts. Fits 9N, 2N, 8N thru 1952. (Part No: 7RA6256) $58.90 [Show Picture]   Timing Gear, Crankshaft - For Models: 2N, 8N, 9N. Timing Gear Crankshaft. (Part No: 486306A) $38.58 [Show Picture]   Valve Guide Retainer - 120 CID 4 cylinder gas engines. Sold in Multiples of 8 only, price shown is for one (Enter '8' or '16' etc. in QTY). For 2N, 8N, 9N. (Part No: 40-6512) $.72 [Show Picture]   Valve Guide - Single valve guide for 9N, 2N, 8N. (Part No: 8BA6510B) $3.91 [Show Picture]   Valve Key, Intake & Exhaust - 120 CID 4 cylinder gas engines. NOT for free rotating exhaust valves. For 2N, 8N, 9N. Sold in quantities of 8 only, price shown is for one. (Part No: 7HA6518) $0.50 [Show Picture]   Valve Key, Rotating Exhaust - 120 CID 4 cylinder gas engine. Valve key for FREE ROTATING exhaust valves. Sold in quantities of 8 only price shown is for one. For Models: 2N, 8N, 9N. (Part No: EAM6518A) $.86 [Show Picture]   Valve Rotor Assembly - Valve rotator kit for free-type valve 8N6505C. 1 used per valve. Kit contains 1 valve spring retainer (available in kit only), 1 rotator cap, 2 valve locks. For 8N, 9N, 2N with rotating valves (Part No: 8N6534B) $9.71 [Show Picture]   Valve Seat, Exhaust - For Models: 9N, 2N, 8N. (Part No: 218-7405) $8.25 [Show Picture]   Valve Seat, Intake - For Models: 2N, 8N, 9N. (Part No: 218-7535) $3.52 [Show Picture]   Valve Service Kit - Contains: 8 Valve Springs, 8 Valve Guides-Solid Type & 16 Valve Locks For 2N, 8N, 9N. (Part No: VSKF928N) $43.33 [Show Picture]   Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. For 9N, 2N, 8N with solid guides, free rotating exhaust valves. Kit contains valve springs, keys and guides. (Part No: VSKF928NFR) $79.24 [Show Picture]   Valve Spring Retainer, Intake & Exhaust - 120 CID 4 cylinder gas engines. NOT for free type exhaust valve. Must be ordered in quantities of 8 price shown is for one. Retainer for free type valve not furnished separately, order rotator kit 8N6534B. For 2N, 8N, 9N. (Part No: 8BA6514) $1.37 [Show Picture]   Valve Spring Set - Sold in quantities of 8 priced individually. Fits 9N, 2N, 8N. (Part No: 8N6513) $2.22 [Show Picture]   Valve Spring - 120 CID 4 cylinder gas engine. Valve spring for use w\ split guide. For 2N, 8N, 9N. Sold in quantities of 8 only. price shown is for one. (Part No: 2NC6513) $1.63 [Show Picture]   Valve Stem Seal - Seal for valve guide in 120 CID 4 cylinder gas engine. For 2N, 8N, 9N. Sold in sets of 8, price shown is for (1). Enter '8' in Qty when ordering. (Part No: 8BA6571) $0.99 [Show Picture]   Valve Tappet Wrench Set - For 8N, 9N, 2N. Valve Tappet Wrench (Set of 2). For adjustable tappets. (Part No: 8WR1770) $7.55 [Show Picture]   Valve Tappet - ADJUSTABLE tappet. Priced EACH. Fits: 9N, 2N, 8N. Note: Qty 8 used in engine. (Part No: A0NN6500A) $10.64 [Show Picture]   Valve, Exhaust, Free-rotating - Exhaust valve for free-rotating type. Uses solid guide & EAM6518A lock. For Models: 2N, 8N, 9N. (Part No: 8N6505C) $8.25 [Show Picture]   Valve, Exhaust - Exhaust valve using solid guide. Uses 7HA6518 lock. For Models: 2N, 8N, 9N. (Part No: 8N6505A) $7.63 [Show Picture]   Valve, Intake - Intake valve using solid guide. Uses 7HA6518 lock. For 2N, 8N, 9N (Part No: 8BA6507A) $7.19 [Show Picture]   Valve, Intake - Intake valve, mushroom type using split guide. For Models: 2N, 8N, 9N. (Part No: 40-6505A) $27.14 Engine Pistons and Sleeves [Show Picture]   Cylinder Sleeve, .005 oversize .040 - Oversize replacement for .040 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.273 inches - .005 larger than original. Sleeve is .0425 thickness to retain original piston bore of 3 3\16 inches. For Models: 2N, 8N, 9N. (Part No: S1135A2) $26.89 [Show Picture]   Cylinder Sleeve, .005 oversize .090 - Oversize replacement for .090 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.373, .005 larger than original. Sleeve is .0925 thickness to retain original piston bore of 3 3\16 inches. For 2N, 8N, 9N. (Part No: S1137-2) $26.88 [Show Picture]   Cylinder Sleeve, .040 - For models: 9N, 2N, 8N. This Sleeve is.040" thin-wall for 3 ring and 4 ring pistons. Priced as each. (Part No: C0NN6055B) $26.91 [Show Picture]   Cylinder Sleeve, .050 - Wall sleeve for use with.0825 oversize pistons. For Models: 2N, 8N, 9N. (Part No: S1138) $27.00 [Show Picture]   Cylinder Sleeve, .090 - For models 9N, 2N, 8N. This Sleeve is.090 Heavy-wall for 3 ring and 4 ring pistons. Priced as each. (Part No: 8N6055B) $28.98 [Show Picture]   Piston & Sleeve Kit, Complete for 4 Cylinders - Complete sleeve & piston set (4 cylinders) for Ford gas tractors 2N, 8N, 9N (1939-1952) with 120 CID, 4 Cylinder, Gas, Flat Head Engines. Contains: sleeves, pistons, piston pins & retainers and rings. When ordering, specify in 'Comments' section of order form: #1. 3 or 4 Ring Pistons; #2. Sleeve Thickness (.040 or.090). (Part No: 8N-PK) $194.51 [Show Picture]   Piston Pin Bushing - For models 9N, 2N, 8N. This piston pin bushing is.735 ID. Price shown is EACH, minimum order QTY is 4. (Part No: 21A6207A3) $3.14 [Show Picture]   Piston and Sleeve Kit, 3 Ring, .040 Sleeves - Kit contains C0NN6055B .040" sleeves, 8N6108B 3 ring pistons, chrome top & oil rail (8N6149G1) rings, pins & retainers. For Models: 2N, 8N, 9N. (Part No: APN6055E) $134.90 [Show Picture]   Piston and Sleeve Kit, 3 Ring, .090 Sleeves - Kit, (4) A8NN6055A hand pressure installed sleeves, pistons, chrome rings identical to original. For 2N, 8N, 9N, (Part No: APN6055D) $139.90 [Show Picture]   Piston and Sleeve Kit - Fits 9N, 2N, 8N. FOR 1 CYLINDER. Single piston with (1) sleeve, rings, piston pin and retainer. When ordering, specify in 'Comments' section of order form: #1. 3 or 4 Ring Piston; #2. Liner Thickness (.040 or.090). (AI) (Part No: SK-XXX) $48.90 [Show Picture]   Piston and Sleeve Set - Super Piston Set For 9N, 2N, 8N Increased horsepower up to 5% by use of.0825 wall sleeve, same outside diameter as heavy wall sleeve. Can be used in any application where.090 wall thickness sleeves are used..050 wall sleeves, .0825 oversize 4-ring pistons. ``Comes with Sleeves, Pistons, Rings and Retainers. (Part No: PK11) $196.84 [Show Picture]   Piston, 3 Ring - For models 9N, 2N, 8N. This is a single 3 ring piston with standard bore can be used with .040 thin wall sleeves or.090 thick wall sleeves, and a 3\16 oil ring. (Part No: 8N6108B) $24.32 [Show Picture]   Piston, 4 Ring, With 3\16 Oil Ring - For models 9N, 2N, 8N. This is a single piston with a standard bore, 3\16 oil ring. Piston comes with Pin and Lock. This Price is for STANDARD. OVERSIZE ARE AVAILABLE, Please Specify size of std, .020, .030, .040, or .0825 in 'comments' when ordering. (Part No: P1003) $30.21 [Show Picture]   Piston, 4 Ring, With 5\32 Oil Ring - For models 9N, 2N, 8N. This is a single piston with 5\32 oil ring, standard bore. (Part No: 2N61084RS) $29.04 Sleeve Kit - Kit, sleeves, pistons and chrome rings. For 2N, 8N, 9N, (Part No: APN6055A) $139.90 Engine Rings [Show Picture]   3 Ring Piston Ring Set - Chrome - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard, CHROME top ring, 3\16" steel rail oil. Complete set for one engine. (Part No: 8N6149G1) $26.88 [Show Picture]   Piston Ring Set , 4 Ring, Standard - For Ford 2N, 8N, 9N tractors (1939-1952 w\4-cyl. flat head engines) For 4-ring center pin pistons. Std., PLAIN top rings, 5\32" steel rail oil. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149-4RS) $29.26 [Show Picture]   Piston Ring Set, .0825 Oversize - Plain top ring, 3\16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-0) $39.18 [Show Picture]   Piston Ring Set, 3 Ring, Plain - For 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard, Plain top ring, 3\16" steel rail oil. Complete set for one engine. (Part No: 8N6149A5) $28.68 [Show Picture]   Piston Ring Set, 3 Ring - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard 3 Ring, CHROME top ring, 5\32 steel rail oil. Complete set for one engine. (Part No: 9N6149A) $27.76 [Show Picture]   Piston Ring Set, 3 ring - For models 9N, 2N, 8N. Ring set for 3 ring piston with standard bore. This is a SINGLE piston ring set with 3\16 oil ring. (Part No: RST6G1) $8.50 [Show Picture]   Piston Ring Set, 4 Ring - .0825 O.S., plain top, 5\32" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: 2N6149-4RO) $38.43 [Show Picture]   Piston Ring Set, 4 Ring - Chrome .030" O.S., 3\16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-030) $39.18 [Show Picture]   Piston Ring Set, 4 Ring - Chrome .040" O.S., 3\16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-040) $39.18 [Show Picture]   Piston Ring Set, 4 Ring - Chrome. For Ford 2N, 8N, 9N tractors (1939-1952 w\4-cyl. flat head engines) For 4-ring center pin pistons. Std. top rings, 5\32" steel rail oil. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149G1) $32.37 [Show Picture]   Piston Ring Set, 4 Ring - Chrome.020 O.S., 3\16 steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-020) $39.18 [Show Picture]   Piston Ring Set, 4 Ring - For Models: 2N, 8N, 9N tractors (1939-1952 w-4-cyl. flat head engines) For 4-ring pistons. Std., plain top rings, 3-16 steel rail oil. Also available in.020, .030, and.040 oversize w- chrome top, 3-16 steel rail oil. Please specify size desired when ordering. Complete for 1 engine, 4 cylinders. (Part No: PR1003) $39.18 Exhaust System [Show Picture]   Clamp - Bracket, rear muffler. EXACT of ORIGINAL. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 9N5260) $17.67 [Show Picture]   Exhaust Manifold Gasket - SINGLE gasket (TWO gaskets required) for exhaust manifold on 9N, 2N, 8N. (Part No: 9N9448) $2.50 [Show Picture]   Extension Pipe - Vertical two-piece exhaust pipe with clamp, less muffler. For use without muffler, straight through design for maximum exhaust flow-more power. Vertical height remains the same as assemblies with muffler. Inlet 1-1\2" I.D.Outlet 1-1\2" O.D. For 2N, 8N, 9N, (Part No: M104) $28.39 [Show Picture]   Manifold - High Quality Intake and Exhaust Manifold w\Gasket For 9N, 2N, 8N. Add $ 8 to shipping cost due to weight. (Part No: 9N9425WG) $58.31 [Show Picture]   Muffler Clamp - Flanged Muffler Clamp. For Models: 8N, 2N, 9N. (Part No: FP185) $5.50 [Show Picture]   Muffler and Pipe Assembly , Stainless - Horizontal, free flow exhaust, fits the same as original 8N5230 but NOT the same. For Models: 2N, 8N, 9N. (Part No: R4883) $194.80 [Show Picture]   Muffler and Pipe Assembly - Horizontal muffler & pipe, one piece welded assembly for 9N, 2N, 8N with under-hood exhaust. (Part No: 8N5230) $29.90 [Show Picture]   Muffler and Pipe Assembly - Vertical one-piece muffler and pipe assembly, custom design. For 9N, 2N, 8N. Pipe inlet flared, outlet 1-1\2 O.D. (Part No: M200) $52.22 [Show Picture]   Muffler - Heavy-duty horizontal muffler only, with clamps. Inlet 1-1\2" I.D., outlet 1-1\2" O.D., body length 23". For 2N, 8N, 9N, (Part No: M1002) $37.62 [Show Picture]   Muffler - Vertical muffler. Inlet 1-1\2" I.D. Outlet 1-1\2" O.D. For 2N, 8N, 9N, (Part No: M102-0) $33.22 [Show Picture]   Muffler - Vertical two-piece, muffler and pipe with clamp. Custom design ready for assembly. Pipe inlet flared, outlet 1-1\2" O.D. For 2N, 8N, 9N, (Part No: M102) $45.97 [Show Picture]   Nut & Washer Kit - Brass nut & washer kit (Kit contains 4 nuts & 4 Washers) for intake & exhaust manifold. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 33816-KIT) $5.60 Fuel System / Air Intake [Show Picture]   Air Cleaner Assembly - Fits 9N, 8N. Restoration Quality Air cleaner Assembly, Painted Red. Includes Air cleaner, & cup (with mesh). Will not accurately replace the style with the top wire mesh without modification. This Assembly has a solid cap with hole which can be cut off and replaced with a similar screen and lid or left as is, depending on the needs of the user. Bail Type Clips Available as P\N S.61646. (Part No: 8N9600B) $83.26 Air Cleaner Clip - For model 8N. Clips are for air cleaner 8N9600B (Part No: S.61646) $3.98 [Show Picture]   Air Cleaner Cup Gasket - Mounting gasket for Air Cleaner Cup S.61648 and S.60583. For models 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: S.61647) $3.83 [Show Picture]   Air Cleaner Cup - Fits on bottom of 8N9600B air cleaner on 8N. Gasket S.61647 (Item 'D' in picture is available for $5.40 additional, order part number S.61647, if needed. (Part No: S.61648) $29.40 [Show Picture]   Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1\2in x 3-1\4in. (Part No: S.43231) $8.78 [Show Picture]   Air Cleaner Screen - Air cleaner screen. For tractors: 8N (1948-1952). (Part No: 8N9669) $11.23 [Show Picture]   Air Cleaner Tube - For Models: 2N, 8N, 9N. Air Cleaner Tube, Air Cleaner to Carburetor. (Part No: 9N18215C) $12.13 [Show Picture]   Air Funnel Assembly - Fits on model 8N. (Part No: 8N9684) $11.11 [Show Picture]   Air Hose to Carburetor - For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3\8 inches long, 1 1\2 inch inside diameter. (Part No: 9N9652) $2.12 [Show Picture]   Carb Gasket Set - For Models: 9N, 2N, 8N. (Part No: 9N9502) $1.99 [Show Picture]   Carburetor Elbow & Strainer - For Models: 2N, 8N, 9N, NAA, NAB, Jubilee. (Part No: 9N9553) $3.31 [Show Picture]   Carburetor Float, Small Bowl - Small bowl carburetor Float for Marvel Schebler carbs (2 3\8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (yr): 134 CID (1953-1954) or 172 CID(1955-1957) gas engines on tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000. (Part No: 9N9550A) $12.51 [Show Picture]   Carburetor Kit, Basic - For TSX33, TSX241A, TSX241B and TSX241C carburetors on 2N, 8N and 9N tractors. Kit contains throttle shaft, float valve, float lever pin, and gaskets for minor carburetor overhaul. (Part No: BK45V) $10.76 [Show Picture]   Carburetor Kit, Basic - For Zenith 13876 carburetor on 2N, 9N, 8N. (Part No: BK44V) $28.26 [Show Picture]   Carburetor Kit, Comprehensive - For models from 1939 to 1952, carburetor part #: Marvel-Schebler TSX241A, TSX241B, & TSX241C, Ford 8N9510C. Kit contains parts necessary for major carburetor overhaul, including a Viton float valve. For 2N, 8N, 9N. Does Not include Float. (Part No: C546V) $43.03 [Show Picture]   Carburetor Kit, Comprehensive - For models from 1939 to 1952, carburetor part #: Marvel-Schebler TSX33, Ford 9N9510A. Kit contains all parts necessary for major carburetor overhaul, including a Viton float valve. For 2N, 8N, 9N. Does NOT include float. (Part No: C545V) $42.61 [Show Picture]   Carburetor Throttle Shaft & Lever - For Marvel Schebler carburetor on 2N, 8N, 9N. (Part No: 9N9581A) $4.81 [Show Picture]   Carburetor Venturi - Venturi for original Marvel Carburetors. For Models: 2N, 8N, 9N. (Part No: C5NN9586B) $6.08 [Show Picture]   Carburetor, New - Black. Cast iron. Exactly like original. For 8N, 9N, 2N. (Part No: 8N9510C-Black) $148.95 [Show Picture]   Carburetor, New - For 9N, 2N, 8N, ALL 1939-1952 - Original Marvel-Schebler design replaces TSX33, TSX341B, TSX431c. (Part No: 8N9510C) $119.95 [Show Picture]   Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 9N, 2N, 8N, 1939-1952. New Zenith carb replaces TSX33, TSX241B, TSX241A, TSX241C and OEM# 8N9510C. Center to center on the 2 mounting bolts is 2 1\4 inches. Made in USA, 1 year warranty. (Part No: 13876) $168.13 Carburetor, Rebuilt - Fits 8N, 9N, 2N - replacement for OEM TSX 33, TSX 241B. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1302-CARB) $144.50 Carburetor, Rebuilt - Fits 8N, 9N, 2N - replacement for OEM TSX33, TSX241B. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1302-CARB) $144.50 Carburetor, Rebuilt - Rebuilt carburetors are sometimes hard to keep in stock. We will try to fill your order whenever possible and as quickly as possible. Please allow up to one week for shipping of a rebuilt carb. If you have a good core, we can rebuild yours. Turn around time is about 1 week and you do not have the core charge. Call us for order information if you would like to send in your core. Rebuild cost does not include float. (Part No: CARBNOTE) $0.0 [Show Picture]   Choke Cable - Universal choke cable 72inches long, 7\16 inch thread dia. (Part No: CC72) $11.22 [Show Picture]   Choke Control Rod Assembly - Pre-bent Choke Control Rod is 29 1\2 inches long. Does NOT come with knob. For tractors: 9N, 2N, 8N (1939-1952). See part number 9N9815 for Throttle to Governor Rod. (Part No: 9N9700) $29.86 [Show Picture]   Choke Fly Assembly - Choke fly assy. 1-5\16 dia. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549) $8.25 [Show Picture]   Choke Knob - For tractors: 9N, 2N, 8N (Part No: 9N9703) $7.08 [Show Picture]   Choke Lever & Shaft - For Models: 2N, 8N, 9N. (Part No: 9N9546) $6.65 [Show Picture]   Cyclone Cup and Spring Assy - Only for those tractors (1939-1964)that used the CYCLONE air cleaner assy which MAY include: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verifiy the type of air cleaner you have before ordering. (Part No: 230053) $22.56 [Show Picture]   Cyclone Air Cleaner Glass Jar - For 8N, 2N, 9N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cylone Air Cleaner Glass Jar (Jar Only) Screw on type. Exactly Like Original for tractors that used the 'Cyclone' Air Cleaner only. (Part No: 230056) $23.31 [Show Picture]   Cyclone Air Cleaner Rubber Seal - Rubber Seal, For CYCLONE Air cleaner only. Exact of original. Minimum order Qty is 2. (Part No: 230055) $5.16 [Show Picture]   Fuel Cap, Zinc - Original style cap fits 9N, 2N, 8N. Made of Zinc. (Part No: 9N9030Z) $5.30 [Show Picture]   Fuel Cap - For 2N, 8N, 9N, 600, 800, NAA Fuel Cap. (Part No: D5NN9030A) $6.08 [Show Picture]   Fuel Filter, In-Line, 1\4 inch - Inlet 1\4, outlet 1\4, OD 1-29\32, length 4-1\16. (Part No: 6511393) $6.50 [Show Picture]   Fuel Filter, In-Line, 3\8 inch - Inlet 3\8, outlet 3\8, OD 1-29\32, length 3-7\8. (Part No: BF836) $5.98 [Show Picture]   Fuel Filter, In-Line, 5\16 inch, Clear - Inlet 5\16, outlet 5\16, OD 2-1\8, length 3-21\32. (Part No: BF7736) $5.94 [Show Picture]   Fuel Filter, In-Line, 5\16 inch - Inlet 5\16, outlet 5\16, OD 1-29\32, length 4-5\32. (Part No: BF840) $5.58 [Show Picture]   Fuel Line Anti-Rattler - For 9N, 2N, 8N 1939-1952. Fuel Line Anti-Rattler between fuel line and tank. Restoration Quality. Sold only in multiples of 2 for $15.00 (Part No: 9N9121A) $15.00 [Show Picture]   Fuel Line - For models 9N, 2N, 8N, (1939-1952).This fuel line is from sediment bowl to carburetor. (Part No: 9N9282A) $31.50 [Show Picture]   Fuel Sediment (SHORT) Bowl Assy - Universal assembly complete with fittings. For tractors 9N, 2N, 8N, NAA, Jubilee. Replaces 2N99155B & NAA9155B w\ short bowl. (Part No: 2NAA9155B) $20.16 [Show Picture]   Fuel Sediment Glass Bowl With Gasket - 2 in. Glass Bowl\W gasket fits NAA9155B and 2N9155B sediment bowls. Includes gasket. Fits 2N, 9N, 8N, NAA, Jubilee. (Part No: 9N9162) $2.05 [Show Picture]   Fuel Sediment Screen and Gasket - Gasket & Screen Set (for 2"OD Sediment Bowl), Ford 9N, 2N, 8N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 2NAA916061) $1.99 [Show Picture]   Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $62.99 [Show Picture]   Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $33.66 [Show Picture]   Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3\8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $22.14 [Show Picture]   Fuel Tank - Gasoline Fuel Tank (Steel) For 9N, 2N, 8N. (Part No: 9N9002) $157.13 [Show Picture]   Harco 1\2 Pint Jar - 1\2 pint jar for Harco Air cleaner (side mount) on 8N. (Part No: ACP2131) $3.15 [Show Picture]   Harco Air Cleaner - For 8N (1948-1952) Harco style side mount air cleaner assy with jar and clamp, mounts over air door hole in hood (side mount). (Part No: AC2H18N) $118.90 [Show Picture]   Harco Pint Jar - 1 pint jar for Harco Air cleaner (side mount) on 8N. (Part No: ACP1237) $6.67 [Show Picture]   Harco Spring and Bail Assembly for 1 Pint Jar - 1 pint jar spring and bail assembly for Harco air cleaner (side mount) on 8N. (Jar NOT included). (Part No: ACP2134) $22.82 [Show Picture]   Harco Spring and Bail Assy For 1\2 Pint Jar - Fits Harco 1\2 pint jar. Spring and bail assembly for Harco air cleaner (side mount)on 8N. (Jar NOT included). (Part No: ACP2133) $21.98 [Show Picture]   Main Adjustable Needle - Main adjusting needle. For Models: 2N, 8N, 9N. (Part No: 9N9565C) $5.41 [Show Picture]   Needle Valve - Viton float valve needle, seat & gasket assembly. Tractors: 9N, 2N, 8N, (1939 to 1952. (501, 601, 701, 600, 700, NAA, Jubilee 4-cyl 134 CID gas engines 1953 to 1957), (2000 1962-1964). (Part No: C3NN9564A) $4.01 [Show Picture]   Nozzle - Main nozzle. For Models: 2N, 8N, 9N. For Marvel-Schebler TSX241A, TSX241B, & TSX241C, TSX33, Ford 8N9510C, Ford 9N9510A. (Part No: 9N9530) $6.37 [Show Picture]   Quad Throttle Plate - For 8N. Quad Throttle Plate. (Part No: 8N9889A) $8.50 [Show Picture]   Throttle Control Rod Spring - For Model: 8N 1948-1952. (Part No: 8N9806) $3.38 [Show Picture]   Throttle Rod - Rod, governor to carburetor control rod assembly, 7 inches long, ball recepticle on both ends. For tractors: 9N, 2N, 8N (1939-1952). (Part No: 9N9818A) $21.04 [Show Picture]   Throttle Rod - Rod, throttle to governor control rod assembly.Rod is approx 23in. long and has adjustable length. Spring loaded 'bullet' type ends for coupling to linkage. For tractors: 8N (1948-1952) (Part No: 8N9815) $27.28 Gauges [Show Picture]   Ammeter - For all models to 1958. Terminal type Ammeter. 30 - 30. Chrome Ring. Replaces FAD10850A. (Part No: A0NN10670A) $7.84 [Show Picture]   Gauge Kit, 8N - 8N Gauge Kit - (For 8N after s\n 263844) Consists of Proofmeter, 50 lb. Oil Gauge, and 30-30 Ammeter. (Part No: 8NGAUGEKIT) $42.93 [Show Picture]   Hourmeter, Analog - 2", black, 12-24 volt. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $43.74 [Show Picture]   Instrument Panel Light Assembly - 6 Volt Light Assembly. For Models: 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 8NN14662A) $27.03 [Show Picture]   Oil Pressure Gauge Kit, Universal - Complete assembly w\ oil tube and mounting hardware, Lighted. 80 psi. Line uses 1\4 inch connection with adapters for 3\8 and 1\2 inch. (Part No: SSW0002) $10.95 [Show Picture]   Oil Pressure Gauge, 50lb - For Models: 2N, 8N, 9N. Oil Pressure Gauge, 50 lbs., 2" Body Diameter. (Part No: 9N9273A) $8.39 [Show Picture]   Oil Pressure Gauge - For Models: 2N, 8N, 9N, 600, 700, 800, 2000, 4000, NAA, Jubilee. all before 1964. Oil Pressure Gauge, 40 lbs., 2" Body Diameter. Replaces OEM#'s Ford:``FAD9273A and Massey Ferguson:506902M92. (Part No: S.61171) $11.28 [Show Picture]   Proofmeter Cable - Steel - For 8N 1950 to 1952. Proofmeter Cable is Exactly Like Original, Metal Case, 33 inches long. (Part No: 8N17365B-STEEL) $30.00 [Show Picture]   Proofmeter Cable - Fits 8N with side mount distributor (1950-1952) 34 Inches Long. (Part No: 8N17365) $12.11 [Show Picture]   Proofmeter - Proofmeter for 8N (1950 to 1952) Proofmeter assembly, MPH. (Part No: 8N17360A1) $29.70 [Show Picture]   Temp Gauge - Universal water Temperature gauge. Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1\2 inch or 3\4 male adapter, engine block or radiator threaded hole. (Part No: 1042944) $23.85 Hitch / Drawbar [Show Picture]   CHAIN, STABILIZER KIT - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. 15# (Part No: SK102CH) $49.90 [Show Picture]   Chain - CHAIN, Fixed drawbar safety chain assy, EXACT OF ORIGINAL. FOR tractors: 9N, 2N, 8N, Jubilee, NAA (1939-1954). (Part No: 9N5370) $66.84 [Show Picture]   Crank Arm, Leveling Box - For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4000, 4110, 420, 4600, 600, 700, 800, 8N, 900, 9N, NAA. (Part No: C5NN594E) $14.95 [Show Picture]   Drawbar Link Check Chain Anchor - Anchor, Drawbar link check chain (pair- one right and one left). For 2000, 2600, 2610, 2N, 3000, 3600, 3610, 4000, 4600, 4610, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, SUPER DEXTA, Jubilee. (Part No: 957E5967) $22.06 [Show Picture]   Drawbar, Heavy Duty, Heat Treated - Red bar is 30 1\2" L Hole Center To Hole Center, 2 1\2" Wide, 1 1\8" Thick (drawbar fits lift between lift arms) (Part No: 9N5182) $54.40 [Show Picture]   Eyelet Assy, Check Chain - Fits 9N, 8N, NAA, Jubilee, 900, (2000 4-cyl RowCrop 1\1953 & newer), (4000 RowCrop 1\1953 & newer). (Part No: EC0N660A) $4.18 [Show Picture]   HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3\16, length 3.75), four(4) of HP-4 (wire dia 5\32, length 2 15\16), , four(4) of HP-5 (wire dia 1\8, length 2 9\16), , and three(3) of HP-6 (wire dia 3\32, length 1 5\8). (Part No: HPA15X) $4.99 [Show Picture]   HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3\16, length 3.75), four(4) of HP-4 (wire dia 5\32, length 2 15\16), , four(4) of HP-5 (wire dia 1\8, length 2 9\16), , and three(3) of HP-6 (wire dia 3\32, length 1 5\8). (Part No: HPA15X) $4.99 [Show Picture]   LINCH PIN - LINCH PIN Package of 10 linch pins. 3\16" O.D. pin x 1-1\4" Long.***Enter 1 for package of 10** (Part No: DKP316) $3.90 [Show Picture]   LINCH PIN - Package of 10 linch pins. 7\16" dia. pin x 1-3\4" useable length, 1-5\8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $3.90 [Show Picture]   LINCH PIN - Package of 10 linch pins. Pin diameter 1\4 inch, useable length 1 1\4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $4.90 [Show Picture]   LINCH PIN - Package of 10 linch pins. Pin diameter 5\16 inch, useable length 1 1\4 inch, Ring diameter 1 5\8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $3.90 [Show Picture]   Level Box Fork - Right - Fork, hydraulic lift leveling rod, Right Hand. Length 10-1\4". For 2N, 8N, 9N, JUBILEE, NAA. (Part No: 9N585A) $24.90 [Show Picture]   Level Box Handle - Lever handle. For 2000, 2N, 4000, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA (Part No: 9N594) $3.32 [Show Picture]   Leveling Box Assembly - Left - Left Hand Rod and fork assembly, hydraulic lift, left hand. For 9N, 2N, 8N, NAA, Jubilee, tractors. 1939 - 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 8N564B) $47.99 [Show Picture]   Leveling Box Assembly - Right - Right Hand Leveling Box Assembly with fork. Adjusts 20.25 to 25.25 inches. For 2N, 8N, 9N, NAA, Jubilee, all 1939-1964. (Part No: 8N577A) $57.73 [Show Picture]   Leveling Box Gear - Gear, leveling box pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA (Part No: B9NN568A) $6.42 [Show Picture]   Leveling Box Knuckle Pin - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981, 9N, 2N, 8N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). Sold in quantities of 2, price is for 1. 5\8 Pin Dia. 2 7\8 usable length. Takes our 3\16 Linch pin (P\N DKP316). (Part No: 9N595) $1.64 [Show Picture]   Leveling Box Knuckle, Right - Knuckle, Right Hand leveling assembly. For Models: 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA. Uses 2 pins P\N 9N595. (Part No: 957E566) $4.89 [Show Picture]   Leveling Box Yoke Rod, LH - Left Hand side. Rod dia is .750". For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4110, 420, 600, 620, 30, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 8N, 9N, NAA, Jubilee. (Part No: C5NNB863A) $38.89 [Show Picture]   Lift Arm - 32 Inch - Cat 1 - Lift Arm - Red. Category 1. 32inch length, 7\8" holes in end sockets (swivel type). Replaces 180846M91 and 30543E91. (Part No: JSA1002R) $45.41 [Show Picture]   Lift Arm - For 8N, 2N, 9N, NAA, Jubilee. Lower 3-Point lift Arm. Center to Center measurement available in three lengths. 31-3\4, 32, or 32-1\4.Please specify in comments section which Length you prefer. (Part No: 9N555B) $51.53 [Show Picture]   Lower Link Support Pin - Lower link support pin. For 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA, Jubilee. (Part No: NCA563C) $13.30 [Show Picture]   Pin, Hydraulic Lift Yoke - For Models: 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B) $9.44 [Show Picture]   Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7\8" mounting pins and adapter bushings, 27-1\4" width, 3-1\2"x 3-1\2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. (Part No: HF141101) $255.69 [Show Picture]   Shaft Level Box - Shaft and gear, length 14; thread length 4. For 2000, 2N, 4000, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: NCA579B) $9.86 [Show Picture]   Stabilizer Arm Red - Arm only, red. Length 31-1\2 center to center. For Models: 2N, 600, 800, 8N, 9N, JUBILEE, NAA. (Part No: 230042R) $9.14 [Show Picture]   Stabilizer Kit Red - Complete kit, red. For 2N, 600, 800, 8N, 9N, Jubilee, NAA. ** $10 added to shipping due to weight **. (Part No: 231253) $42.07 [Show Picture]   Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 9N, 2N, 8N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets w\pins & hardware. 31.5 inches center to center. ** $15 ADDED TO SHIPPING DUE TO WEIGHT ** (Part No: 231253XHD) $60.02 [Show Picture]   Stay Strap, Lower Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5375) $7.58 [Show Picture]   Stay Strap, Upper Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Part No: 9N5374) $11.40 [Show Picture]   Swinging Drawbar Clevis Assembly - Clevis assembly with pins for SDA6 or SDA8 kits. For Models: 600, 800, 8N, NAA. (Part No: NCA803B_) $31.29 [Show Picture]   Swinging Drawbar Hanger - Drawbar hanger. For 600, 8N, NAA, (Part No: NCA809A_) $41.63 [Show Picture]   Swinging Drawbar Kit - For NAA, 600, 8N. Swinging Drawbar Kit. Painted Red. Contains Drawbar: 29.375" long, 2.00" wide, 1.00" thick, Rear Drawbar Hanger, Drawbar Clevis Assembly and Drawbar Clevis Pin. ADDITIONAL $10 SHIPPING FEE DUE TO WEIGHT. (Part No: 49A34R) $99.48 [Show Picture]   Swinging Drawbar - Drawbar is replacement drawbar for the swinging drawbar kit. 600, 800, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. (Part No: C0NN805F) $54.89 [Show Picture]   Thrust Bearing - Bearing assembly. For 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: 9N554) $3.94 [Show Picture]   Top Link Rocker - For 9N, 2N, 8N, NAA, Jubilee, 600, 800 Hi Clearance, 601, 801, 2000 4 cyl Hi-Clearance, 4000 4 cyl Hi-Clearanc. (Part No: NCA535A) $66.10 Hydraulic System [Show Picture]   Bushing - Bushing for hydraulic pump base, for PTO shaft. For 2N, 9N, 8N. (Part No: 9N649A) $29.94 [Show Picture]   Cam Block - For hydraulic pump, 9N, 2N and 8N (1939-52). (Part No: 9N617A) $55.70 [Show Picture]   Chamber Kit - Repair kit for one hydraulic pump chamber. Fits either Left or Right Chanbers. For 2N, 9N, 8N (Part No: 9N621KIT) $25.80 [Show Picture]   Coupler Flange - FORD: Drive flange; 5\8" round bore with set screw 1\4" x 3\8" #SSH4-6. HYDRAULICS: Drive flange; 5\8" round bore with set screw 1\4" x 3\8" #SSH4-6. 2-1\4" b-b (Part No: L36-6) $63.65 [Show Picture]   Draft Control Plunger Spring - Fits between Hydraulic plunger & yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 9N547B) $31.18 [Show Picture]   Draft Control Plunger - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta. (Part No: 8N541B) $32.29 [Show Picture]   Draft Control Spring Plate - For Models: 8N, NAA (1948-1954). (Part No: 8N527) $22.78 [Show Picture]   Draft Control Yoke - Fits 9N, 2N, 8N. (Part No: 9N546C) $29.70 [Show Picture]   Felt, Spring Seat - Hydraulic lift draft control spring seat. For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529) $3.71 [Show Picture]   Friction Disk - Hydraulic Control Lever. 3" dia. 1\2" hole. For Models: 2N, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, (2000 & 4000 4 cyl.). Price is for each. (Part No: C5NN518B) $.99 [Show Picture]   Gasket, Hydraulic Cylinder to Center Housing - 1" OD, 7\16" ID. For Models: 2N, 8N, 9N. Sold in quantities of ten priced individually. (Part No: 9N552) $.49 [Show Picture]   Gasket, Hydraulic Pump Drain - Fits 9N, 2N, 8N.Price each. (Part No: 8N7011) $.99 [Show Picture]   Hydraulic Lift Control Quadrant - For Models: 9N, 2N, 8N. Hydraulic lift control lever connects to this. (Part No: 9N515) $25.00 [Show Picture]   Hydraulic Lift Cover Repair Kit - For 9N, 2N, 8N. Lift Cover Repair Gasket Kit. Gasket Set includes 2 Valve chamber gaskets, lift cover gasket, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Part No: LCRK928) $7.70 [Show Picture]   Hydraulic Lift Cylinder - For 9N, 2N, 8N. Hydraulic Lift Cylinder. Cylinder only. Can use 3 ring piston or o-ring type. Sold seperately. (Part No: 9N510D) $89.95 [Show Picture]   Hydraulic Lift Level Indicator (Dip Stick) - 9N, 2N, 8N, NAA. Hydraulic Lift Level Indicator. (Part No: NAA927C) $5.04 [Show Picture]   Hydraulic Lift Lever - For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cyl.). (Part No: S.66598) $23.88 [Show Picture]   Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900. Replaces NCA526A and 957E526. (Part No: 86563314) $35.53 [Show Picture]   Hydraulic Lift Piston O-Ring - For 9N, 2N, 8N. O-Ring used on piston #NAA530B. Price is for each. (Part No: NAA533A) $1.19 [Show Picture]   Hydraulic Lift Piston Rings - Kit of 3, steel, fits piston 9N530B. For Models: 2N, 8N, 9N. (Part No: 9N675) $6.26 [Show Picture]   Hydraulic Lift Piston Washer - For 9N, 8N, 2N. Hydraulic Lift Piston Washer used with Piston #NAA530B. Price is for each. (Part No: NAA473A) $1.64 [Show Picture]   Hydraulic Lift Piston - 3 ring Piston, hydraulic lift. For 2N, 8N, 9N. (Part No: 9N530B) $20.65 [Show Picture]   Hydraulic Lift Piston - Single groove piston 2-1\2" dia., groove is centered 1 1\4 inch from bottom of piston. O-Ring available as NAA533A and Back Up Washer as NAA473A. For Models: NAA, NAB, 2N, 8N, 9N. (Part No: NAA530B) $26.20 [Show Picture]   Hydraulic Lift Ram Arm - For 2N, 8N, 9N. This part will work for the 2N, 9N and early 8N but does not look like the original. This does look like the original for the Late 8N. For an early 9N, this part may require additional machining, such as grinding down the end raised portion, and\or shortening one end 1\4 inch and adjusting with shims. (Part No: 8N545B) $117.46 [Show Picture]   Hydraulic Lift Shaft Arm - For 2N, 8N, 9N, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 gas. (Part No: 9N543B) $86.34 [Show Picture]   Hydraulic Lift Shaft - For Models:9N, 2N, 8N, NAA, Jubilee, 2000, 4000, 600, 700, 800, 900. Hydraulic Lift Shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 2N, 8N, 9N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART # NCA551A & 2 - 7\16"-20 X 11\16" BOLTS THAT ARE CURRENTLY NOT AVAILABLE FROM YESTERDAY'S TRACTOR]. (Part No: NCA544B) $212.90 [Show Picture]   Hydraulic Lift lever Assembly - For 9N, 2N, 8N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift Control Lever with Ball End 2N512, Lift Control Plate (Cast Aluminum as original) 2N-516A2 and Friction Disc C5NN518B. (Part No: 2N512) $36.07 Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts) $00.00 [Show Picture]   Hydraulic Pump Drive Shaft - APPLICATION: 9N, 2N, 8N, ``SHAFT DIAMETER: 3\4 ", ``SHAFT OVERALL LENGTH: 13-1\16 ", ``END A TYPE: Key, ``END A SIZE: 3\4 ", ``END B TYPE: LH Thread, ``END B SIZE: 5\8 " . END A mates to coupler L601-14. END B mates to hub 191196. (Part No: 190760) $11.92 [Show Picture]   Hydraulic Pump Drive Shaft - For models 9N, 2N, 8N. 3\4 inch shaft diameter, 13 inches in length, 6 spline on one end and key on other end. Mates with end hub 192161 or 54C2055. Other end mates with coupler L601-14. (Part No: 194354) $27.32 [Show Picture]   Hydraulic Pump Hub - For Models: 9N, 2N, 8N. Hydraulic Pump Hub 3 3\8" OD, 2 3\8 Center to center on holes. 6 spline center bore, 5\8" ID. Used with part #'s 192160 and 194354. (Part No: 192161) $41.97 [Show Picture]   Hydraulic Pump Hub - For Models: 9N, 2N, 8N. Hydraulic pump hub is 3" OD, 2 13\32 center to center on pins (no holes). Includes pins. (Part No: 191196) $33.36 [Show Picture]   Hydraulic Pump Hub - Hydraulic Pump Hub for Sherman 54 Series Loader. Hydraulic Pump Hub 3 7\8 OD, 2 3\4 Center to center on holes. 6 spline center bore, 3\4 ID. (Part No: 54C2055) $32.95 [Show Picture]   Hydraulic Pump Overhaul Kit - For 9N, 2N, 8N (1939-52). Kit contains cam blocks, pistons, chamber kits, PTO shaft bushing, safety valve, and gaskets. (Part No: HPOK1) $159.50 [Show Picture]   Hydraulic Pump Rebuild Kit - Comprehensive - For Models: 9N, 2N, 8N (1939-52). Kit contains 2 cam blocks, 2 Pistons, 2 Chamber Repair Kits, PTO Shaft Bushing, Safety Valve, 2 Valve Chambers, Base Gasket, Sump Pump Gasket, 2 Side Gaskets, PTO Shaft Gasket, 2 Side Plate Gaskets. (Part No: S.61725) $358.56 [Show Picture]   Hydraulic Pump Valve Chamber Assembly, RH - Right hand valve Chamber with valves. For Models: 9N, 8N, 2N. (Part No: 9N621-ASSY_) $98.63 [Show Picture]   Hydraulic Pump Valve Chamber Assembly, LH - Left hand valve chamber with valves. For Models: 2N, 8N, 9N. (Part No: 9N622-ASSY) $98.63 [Show Picture]   Hydraulic Pump Valve Chamber - Left Hand Valve Chamber, Less Valves. For 9N, 2N, 8N. Cast Iron. (Part No: 9N622-C) $89.60 [Show Picture]   Hydraulic Pump Valve Chamber - Left Hand Valve Chamber, less valves. For 9N, 2N, 8N. Polished Steel Finish. (Part No: 9N622) $145.81 [Show Picture]   Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, Less Valves. For Models: 9N, 8N, 2N. Cast Iron (Part No: 9N621-C) $89.60 [Show Picture]   Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, less valves. For 9N, 2N, 8N. Polished Steel Finish. (Part No: 9N621) $131.97 [Show Picture]   Hydraulic Safety Valve Assy - For Models: 9N, 2N, 8N. (Part No: 8N638) $27.86 [Show Picture]   Hydraulic Spring Seat - For Models: 9N, 2N, 8N, NAA, 600, 900 (1948-1954). (Part No: 9N525B) $7.83 [Show Picture]   Hydraulic pump base to center housing Gasket - For Models: 9N, 2N, 8N. (Part No: 9N611) $1.65 [Show Picture]   Lock Washer, Special - Hydraulic lift shaft to arm. For Models: 9N, 8N, NAA (1939-1954). (Part No: 9N550) $4.59 [Show Picture]   Piston for Hydraulic Pump - For 9N, 2N, 8N (1939-52). (Part No: 9N615) $36.75 [Show Picture]   Seat, Hydraulic Lift Draft Control Spring - Exact of original. Fits all models (1939-1964). (Part No: 2N624) $6.22 [Show Picture]   Superior & Wagner Loader Hydraulic Pump Kit - Hydraulic pump kit for various loaders mounted on Ford tractors. Pump specifications: 14GPM @ 2000RPM, 3\4" round shaft with key, left hand rotation, Inlet port 1" NPT, Outlet port 3\4" NPT. Kit includes hyd. pump, foot\flange bracket, 2 mounting bolts & washers, and 2 adapters. Replaces 3660. (Part No: L827-10X) $366.60 [Show Picture]   Valve chamber to base Gasket - For Models: 9N, 2N, 8N (1939-1942). (Part No: 9N613) $1.72 Lights [Show Picture]   Bracket - Bracket, headlight switch to dash. For tractors: 8N {1948-1950}. (Part No: 8N11671) $5.59 [Show Picture]   Bracket - Headlight bracket reinforcement, clear zinc plated for ROUND headlight bracket. For tractors: 8N, NAA {1949-1954}. (Part No: 8N13102) $5.59 [Show Picture]   Bracket - Headlight bracket reinforcement, clear zinc plated for WINGED headlight bracket. For tractors: 9N, 2n, 8n {1939-1949}. (Part No: 9N13102) $5.60 [Show Picture]   Clip Set - Set of 7 - Clip, headlight wiring to hood. Set of 7. For tractors: 9N, 2N, 8N {1939-1952}. Replaces OEM # 358297S32. 7 Required per tractor. (Part No: 358297S7) $5.53 [Show Picture]   Clip - Clip, {rear lamp wire to brake actuating shaft} 2 required. For tractors: 8N, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N14565) $8.25 [Show Picture]   HEADLIGHT - 12 VOLT - 12 Volt, 5-3\4" dia., sealed beam bulb. Fits 9N, 2N, 8N, Complete assembly is a copy of original headlight, IS NOT EXACTLY LIKE ORIGINAL. Single unit Replaces 13005C or 13006C assemblies (RH or LH). (Part No: S.66419) $45.00 [Show Picture]   HEADLIGHT SET - 12 VOLT - For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. EXACTLY like original with TRACT-O-LITE stamped into housing. (Part No: 2N13005-12V) $149.90 [Show Picture]   HEADLIGHT SET - 6V - EXACTLY like original with TRACT-O-LITE stamped into housing for models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. Spare sealed beam bulbs available as p\n L4019. (Part No: 2N13005-6V) $149.90 [Show Picture]   Headlight Bracket - ROUND right or left side. For Models: 8N, NAA, Jubilee {1949-1954}. (Part No: 8N13472) $8.27 [Show Picture]   Headlight, 12 Volt CHROME RING - This headlight assembly is Complete with sealed beam bulb with steel socket, Chrome ring, Stamped TRACT-O-LITE in housing.Replaces 2N13006C, 2N13005C. (Part No: S.67893) $42.39 [Show Picture]   Headlight, 6 Volt CHROME RING - This headlight assembly is Complete with sealed beam bulb with steel socket, Chrome ring, Stamped TRACT-O-LITE in housing.Replaces 2N13006C, 2N13005C. (Part No: S.67892) $42.39 [Show Picture]   Headlight, 6 Volt, LH - Left Side for 9N, 2N, 8N, Complete assembly is A copy of original headlight. NOT EXACTLY LIKE ORIGINAL. (Part No: 2N13006C) $41.81 [Show Picture]   Headlight, 6 Volt, RH - Right Side for 9N, 2N, 8N, Complete assembly is A copy of original headlight. NOT EXACTLY LIKE ORIGINAL. (Part No: 2N13005C) $41.81 [Show Picture]   Knob, Light Switch - Aluminum. For Models: 9N, 2N, 8N, NAA, Jubilee. (Part No: 9N9703) $7.08 Light Rim CHROME - For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. Replaces 2N13043. (Part No: S.67891) $17.01 [Show Picture]   Light Rim - Head light door assembly {rim}. For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. (Part No: 2N13043) $25.30 [Show Picture]   Light Rim - Rim, worklight bulb retainer, OD 5-1\4", ID 4". For Models: 8N, NAA, {1949-1954}. (Part No: 8N15513) $25.30 [Show Picture]   Light Switch w\ Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $26.66 [Show Picture]   Light Switch - For Models: 9N, 2N, 8N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B) $8.50 [Show Picture]   Retainer 3 Per PGK - Clips, worklight bulb to rim retainer. Set of 3 {special clip to hold bulb assembly in rim}. For tractors: 8N, NAA {1949-1954}. (Part No: 8N15534) $6.72 [Show Picture]   STROBE LIGHT - 4 IN AMBER DUAL FLASH. PrecoStrobe lighting safety lights. Magnetic mount, double flash, amber lens color. 80 double flashes per minute, 12 - 24 volt systems. Height: 4.649" (118mm). Width: 6.400" (163mm). (Part No: SL3416AD) $139.90 [Show Picture]   Switch, Headlamp - Assembly with pigtail wire connectors. EXACT OF ORIGINAL. For Models: 9N, 2N, 8N (1939-1949). (Part No: 9N11652) $23.01 [Show Picture]   Switch, Light - Switch, Worklight. For Models: 8N, NAA (1949-1954). (Part No: 8N13740) $21.04 [Show Picture]   Tail Light Assembly - Exact as Original in Every Detail. Ford Duolamp (stamped in tailight housing) tractors: 9N, 2N, 8N (1939-1952) (Part No: 8N13404) $44.25 [Show Picture]   Tail Light Fender Bracket - FOR 9N, 2N, 8N (1939-1952). Left side. (Part No: 9N13471) $27.28 [Show Picture]   Tail Light Fender Bracket - Fits 9n, 2n, 8n, (1939-1952). Right side (Part No: 9N13470) $27.28 [Show Picture]   Tail Light Wire Clip - For 2N, 8N, 9N, NAA and Jubilee to 1954. Rear Lamp Wire Clip - 6 required per tractor. (Part No: 9N17668) $2.21 [Show Picture]   Taillight Mounting Bracket - Exact of original. Mfg in USA. (Goes between tailight and fender bracket - mounting on top of 9N13470 or 9N13471.)For DUOLAMP tractors 9N, 2N, 8N, NAA. (1949-1954) (Part No: 8N13423) $11.22 [Show Picture]   Winged Headlight Bracket - Left Side. For Tractors: 9N, 2N, 8N, NAA. Bracket is pressure die cast of zinc and manufactured in the USA. MADE EXACTLY LIKE THE ORIGINAL (Part No: 9N13473) $29.46 [Show Picture]   Winged Headlight Bracket - Right Side. For Tractors: 9N, 2N, 8N, NAA. Bracket is pressure die cast of zinc and manufactured in the USA. MADE EXACTLY LIKE THE ORIGINAL (Part No: 9N13472) $29.46 [Show Picture]   Work Light Assembly - 12 Volt - Worklight assembly, 12-volt seal beam with on\off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-12V) $88.23 [Show Picture]   Work Light Assembly - 6 Volt - Worklight assembly, 12-volt seal beam with on\off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-6V) $88.23 [Show Picture]   Work Light Assembly, OEM 6 Volt - Like original worklight assembly with on\off switch. Includes fender bracket spacer. Does not include fender bracket. For tractors: 2N, 8N {1947-1951}. (Part No: 8N15500E) $117.65 [Show Picture]   Worklight Bulb, 6 Volt - Worklight bulb assembly, CLEAR lens. M.F.G. in U.S.A. For tractors: Early 8N {1949-1951}. (Part No: 8N15514E) $44.80 [Show Picture]   Worklight Bulb, 6 Volt - Worklight bulb assembly, FROSTED lens w\rings. M.F.G. in U.S.A. For tractors: Late 8N, NAA, {1951-1954}. (Part No: 8N15514L) $44.80 [Show Picture]   Worklight Kit, 6 Volt, Chrome - Kit includes, 6" steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount(socket), and switch. Assembly required. For Models: 2N, 9N, 8N, NAA, 600, 800. (Part No: S.43377) $62.70 Miscellaneous [Show Picture]   CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD\VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof xtension Cables. (Part No: CC7M1C) $335.61 [Show Picture]   Canopy Mounting Kit, 2 Post - Mounts the canopy to all our 2 post ROP frames except EMF1 (Hoop Type Frame). (Part No: B6603) $51.48 Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $53.79 Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $77.88 [Show Picture]   Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. (Part No: B257XSTD) $292.51 [Show Picture]   Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. (Part No: B257X) $402.16 [Show Picture]   Deluxe Canopy, 3 Bow - Blue. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100B) $153.92 [Show Picture]   Deluxe Canopy, 3 Bow - Red. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $153.92 [Show Picture]   Deluxe Canopy, 3 Bow - Yellow. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100Y) $153.92 [Show Picture]   Deluxe Canopy, 5 Bow - Red. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504R) $199.90 [Show Picture]   Deluxe Canopy, 5 Bow - Yellow. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504Y) $199.90 [Show Picture]   Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $132.57 [Show Picture]   Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: 9N, 2N, 8N. (Part No: 1212406) $299.95 [Show Picture]   Historical Tractor Photographs - These beautiful black & White photo reproductions are of 9N, 2N and 8N Ford tractors. Set of 16 photos (12in x18in.). These are good semi-glossy prints suitable for framing. Great for the shop or as a gift! (Part No: S.22994) $69.95 [Show Picture]   Historical Tractor Photographs - These beautiful black & White photo reproductions are of 9N, 2N and 8N Ford tractors. Set of 5 photos (12in x18in.). These are good semi-glossy prints suitable for framing. Great for the shop or as a gift! (Part No: S.22093) $28.88 [Show Picture]   ROP Frame Assembly - Cross Bar type Roll-Over Protection frame. Fits 9N, 2N, 8N, DEXTA, NAA, Jubilee, 501, 600, 601, 700, 701, 2000, 2100, 3000. ** ITEM IS TRUCK SHIPPED (100 lbs)- $85 IS ADDED TO SHIPPING **. (Part No: MF1) $558.50 [Show Picture]   Tractor Cover - Fits 9N, 2N, 8N. VERY Heavy duty canvas type. Burgundy colored. No Logos. (Part No: S.60175) $135.92 [Show Picture]   Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $37.50 [Show Picture]   Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $168.27 [Show Picture]   Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p\n 3013-0003. (Part No: 3013-0002) $182.83 [Show Picture]   Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $194.87 [Show Picture]   Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p\n 3013-0003. (Part No: 3013-0001) $209.43 Oil System [Show Picture]   Engine Oil Dipstick - For Models: 2N, 8N, 9N. (Part No: B2NN6750A) $3.68 [Show Picture]   Oil Dip Stick Tube - For 2N, 9N, 8N. Engine Oil level Dip Stick Tube. Replaces EBP6784A. (Part No: 8N6784) $5.42 [Show Picture]   Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A) $3.22 [Show Picture]   Oil Filler Cap with Element - For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, ``801, 811, 821, 841, 851, 861, 871, 881, ``900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Also replaces OEM 8N6766B. (Part No: 310030) $9.08 [Show Picture]   Oil Filler Cap - Oil filler breather cap. For tractors: 9N, 2N, 8N (1939-1950). Overall length is 3 5\8, 1 1\4 diameter tube and tube is 1 3\8 long. (Part No: 9N6766) $27.28 [Show Picture]   Oil Filters, Tripack - Pack of three APN6731B. For 2N, 8N, 9N. (Part No: APN18649B) $17.99 [Show Picture]   Oil Filter - Filter element & gasket for tractors: 9N, 2N, 8N (1939-1952) (Part No: APN6731B) $6.84 [Show Picture]   Oil Pan Plug Kit - Gasket, oil pan plug & screen assembly. For all gas models 1939-1964. Fits 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 (Part No: 9N6730WG) $13.14 [Show Picture]   Oil Pick Up Tube - For Models: 2N, 8N, 9N. (Part No: 8N6615) $47.95 [Show Picture]   Oil Pump Body - For 8N after S\N 247571. For pumps with 3\4 inch gear width. Pump body assembly does not include gears. (Part No: 8N6603) $93.99 [Show Picture]   Oil Pump Body - For Models: 9N, 2N & 8N to S\N 247571. For pumps with 9\16 inch gear width. Pump body assembly does not include gears. (Part No: 9N6603) $93.99 [Show Picture]   Oil Pump Bushing - Fits 9N, 2N, 8N. ``***Minimum order QTY is 5 (Part No: 9N6612A) $3.76 [Show Picture]   Oil Pump Gasket - For 9N, 2N, 8N.``***Min order qty is 10*** (Part No: 9N6619) $.59 [Show Picture]   Oil Pump Gear, Driven - Gear, oil pump driven, gear width 3\4. For Model: 8N. (Part No: 8N6610) $54.46 [Show Picture]   Oil Pump Gear, Drive - Gear, oil pump drive, gear width 3\4. For Model: 8N. (Part No: 8N6614) $54.45 [Show Picture]   Oil Pump Gear - For 2N, 8N, 9N. Oil Pump Large Gear with 1 1\2" shaft for oil pump body number 9N6603. (Part No: 9N6608A) $29.90 [Show Picture]   Oil Pump Gear - Gear, oil pump drive, width 9\16. For Models: 2N, 8N, 9N. (Part No: 52-6614B) $21.78 [Show Picture]   Oil Pump Gear - Gear, oil pump driven, width 9\16. For Models: 2N, 8N, 9N. (Part No: 52-6610B) $13.27 [Show Picture]   Oil Pump Kit - Complete oil pump repair kit for Ford , 8N serial# 247571 and up(1948-1952). For pumps with 3\4" gear WIDTH. Early & late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600B) $42.52 [Show Picture]   Oil Pump Kit - Complete oil pump repair kit for Ford 9N, 2N, 8N prior to serial# 247570 (1939-1948). For pumps with 9\16" gear WIDTH. Early & late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600A) $42.52 [Show Picture]   Oil Pump Tool - A complete tool set with jig, punches and reamer. For Models: 2N, 8N, 9N. (Part No: OPT20) $95.97 [Show Picture]   Oil Terminal Block - Oil Gauge to Block Elbow. 1\4 inch taper pipe thread. For Models: 2N, 8N, 9N from 1948-1952. (Part No: 8N6722) $9.24 [Show Picture]   Plunger - Plunger, oil pump relief valve. For tractors: 9N, 2N, 8N, (1939 to 1952). For 907 Order Spring (9N6654 $1.25 sold in quantities of 4). (Part No: 01A6663) $10.82 [Show Picture]   Reamer - Replacement reamer for oil pump tool. For Models: 8N, 9N. (Part No: OPT20R) $55.80 PTO [Show Picture]   Bearing, PTO Shaft - Front PTO shaft bearing, 2 3\8 inches O.D. 1 3\16 I.D. 5\8 width. For 2N, 8N, 9N, NAA (1953-54), Jubilee, NAB. Replaces 9N715C. (Part No: 9N715BC) $5.31 PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. (Part No: MISC) $0.00 [Show Picture]   PTO CAP - For Models: 9N, 8N, 2N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 310088) $5.83 [Show Picture]   PTO Housing Gasket - PTO Housing Gasket. For 2N, 9N, 8N, NAA, all through 1954. (Part No: C5NN747A) $.99 [Show Picture]   PTO Shaft Conversion Assembly - Shaft assembly with cap converts 1-1\8 inch PTO system to 1-3\8 inch. Assembled and ready to install by removing 4 bolts from cover. Length 30-7\8 inches. (Part No: 9N700-38) $94.90 [Show Picture]   PTO Shaft Housing - For 8N, 9N, 2N, (NAA 1953-54), Jubilee, NAB. (Part No: 9N733B) $21.11 [Show Picture]   PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1\8" or 1-3\8" PTO shaft. 2.45 O.D., 1 5\8 I.D., 5\8 wide. Replaces OEM#s : D8NN703AA & D9NN703BA, and 9N703B. (Part No: D9NN703BB) $7.34 [Show Picture]   PTO Shaft Seal - O.D 2.45", I.D 1-5\8", 5\8" wide. For tractors with 1-1\8" to 1-3\8" PTO including 4, 6, 7, 8 speed transmissions, models: 9N, 2N, 8N, NAA, Jubilee, 2000, 3000, 3550, 4000, (1965-1975), 2600, 3600, 4100, 4600, (1975-1981), 2610, 3610, 4110, 4610, (1981-up). Replaces 9N703B, D8NN703AA, D9NN703BA. (Part No: D9NN703BB) $7.34 [Show Picture]   PTO Shaft Sleeve Bushing - For 1-1\8in. PTO shafts (NOT 1-3\8in.)1.185" I.D, 1.620" O.D, 1" thick. For Models: 9N, NAA (1953-54), 2N, 8N, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 9N735B) $5.97 [Show Picture]   PTO Shaft - PTO Shaft For 9N, 2N, 8N (converts 1 1\8" shaft to 1 3\8" spline. This is the shaft only. (Part No: 9N710-38) $94.44 [Show Picture]   PTO, Snap Ring - For Models: 2N, 8N, 9N, NAA all 1943-54. Sold in packages of 2. Priced indvidually. Must be ordered in quantities of 2.``2.58 inches O.D., 2.26 inches I.D. (Part No: 9N754) $1.35 Paint Paint, Light Gray, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330SP) $5.92 Paint, 1 Gallon, Clear Coat - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL) $52.73 Paint, 1 Quart, Clear Coat - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT) $29.73 Paint, Aerosol, 6 Cans, Clear Coat - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP) $6.68 Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $44.50 Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $21.50 Paint, Aluminum, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $5.92 Paint, Brownish Medium Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245GAL) $58.25 Paint, Brownish Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245QT) $21.36 Paint, Brownish Medium Gray, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245SP) $5.92 Paint, Empire Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For Models 1963 and up. (Part No: TP360GAL) $44.50 Paint, Empire Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360QT) $21.50 Paint, Empire Blue, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.***High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360SP) $5.92 Paint, Ford White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470GAL) $60.41 Paint, Ford White, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470SP) $5.92 Paint, Light Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330GAL) $44.50 Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330QT) $21.50 Paint, Medium Gray, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability, heat resistant. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240SP) $5.92 Paint, Medium Grey, 1 Gallon - Medium Grey. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240GAL) $44.50 Paint, Medium Grey, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240QT) $18.73 Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $44.50 Paint, Vermillion Red, 1 Gallon - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822GAL) $44.50 Paint, Vermillion Red, 1 Quart - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822QT) $21.50 Paint, Vermillion Red, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.****For models (1948-1957). Vermillion Red. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822SP) $5.92 Paint, Vibrant Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365GAL) $60.41 Paint, Vibrant Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics (Part No: TP365QT) $25.10 Paint, Vibrant Blue, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365SP) $5.92 Seats [Show Picture]   Flip-Over Seat Spring, Hinge & Bolt Assembly - For flip-over seats on 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4-cylinder gas. Seat not included. Equivalent to NCA404B and NCA436A. (Part No: R0642R0643) $49.00 [Show Picture]   Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1\2" center to center on mounting holes, 1\2" by 1\2" center square. (Part No: B1865) $37.24 [Show Picture]   Pan Seat - 19 inch wide fixed seat For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 2000, 4000, all with 4 cylinder engine. This is not a flip-over seat. (Part No: 8n400) $42.13 [Show Picture]   Pan Seat - 19 inch wide flip-over style. Replaces OEM# C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 800, 2000, 4000, 2N, 8N, 9N(4-cylinder). May come with a darker blue paint than pictured. (Part No: C5NN400AE) $42.09 [Show Picture]   Rubber Bumper - Drivers seat to spring. For Models: 8N, NAA, NAB. All 1948-1954. (Part No: 8N434B) $3.52 [Show Picture]   SEAT, AIR SUSPENSION, BLACK LEATHERETTE - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore\aft & lateral isolators, adj shock, seat top w\ Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V) $1099.90 [Show Picture]   SEAT, AIR SUSPENSION, CLOTH - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore\aft & lateral isolators, adj shock, seat top w\ gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056) $1099.90 [Show Picture]   SEAT, AIR SUSPENSION, CLOTH - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore\aft & lateral isolators, adj shock, seat top w\ gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056) $1099.90 [Show Picture]   Seat Assembly, Black & White - For Models: 2N, 9N, 8N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. This seat is designed to bolt to a U-Shaped spring for a Non-Flip style pan seat. (Part No: CSA888-5) $106.33 [Show Picture]   Seat Assembly, Blue - For Models: 2N, 9N, 8N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. Complete seat. (Part No: CSA887-8) $115.02 [Show Picture]   Seat Clip - For Models: 8N, NAA (1948-1954).This clip is for drivers seat to spring. This clip will only work with original 3 inch wide spring. Many of the replacement springs are 2 3\8 inches wide. (Part No: 8N433) $7.53 [Show Picture]   Seat Cushion (Blue and White) - For all ford tractors with 21 inch wide steel pan seat. This seat cushion is blue and white with a FORD script logo. (Part No: R4120) $32.55 [Show Picture]   Seat Cushion (Red and White) - Seat Cushion - Deluxe with 2in. of foam padding. For all ford tractors with 21 inch wide steel pan seat. This seat cushion is Red and white with a FORD script logo. (Part No: R4118) $32.55 [Show Picture]   Seat Cushion (Red) - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is red with a FORD script logo. (Part No: 8N401R) $42.58 [Show Picture]   Seat Cushion, Blue - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is blue with a FORD script logo. (Part No: 9N401B) $44.71 [Show Picture]   Seat Hinge Pin - Exact of original. For Models: 8N, NAA, Jubilee all from 1948 to 1954. (Part No: 352664S) $4.69 [Show Picture]   Seat Hinge - Fits Models:2000, 4000, 600, 800, 8N, 900, NAA. Can replace OEM 86531095. This hinge is made for the 2 3\8 inch wide spring. Will work on the 3 inch spring with modification of bolt holes. (Part No: R0643) $13.61 [Show Picture]   Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 800, 900, 2000, 4000 with 4 Cylinder Engine. 2 3\8 inches wide. May require modification of bolt holes for an original hinge. (Part No: R0642) $38.22 [Show Picture]   Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $139.90 Sheet Metal / Body Parts [Show Picture]   Air Cleaner Door - Air cleaner door w\fastener. COMES PRIMERED, NOT PAINTED. For air cleaner opening in hood, for tractor 8N (1948-1952). Also for 9N & 2N when replacing hood with 8N16612. (Part No: 8N9661_) $13.21 [Show Picture]   Battery Box Kit - Fits 8N- Includes Box, Hold Down, Cables & Bolts (Part No: SRP8NFB) $84.48 [Show Picture]   Battery Box - Fits 8N only. (Part No: 8N10732) $50.39 [Show Picture]   Battery Cover, Restoration Quality - Battery cover with access door, also with flat cable opening. Exact of original. Powder coated red. For 8N (1948 to 1952). (Part No: 8N5162) $50.76 [Show Picture]   Battery Door Handle Kit - Contains battery door latch with Handle and stud. For Models: 9N, 8N, 2N. (Part No: 9N16625-56) $20.88 [Show Picture]   Battery Door Hinge Kit - For Models: 9N, 2N, 8N. Contains hinge half for battery door and hood plus pin. (Part No: 9N16651-89) $20.80 [Show Picture]   Battery Door - For 9N, 2N, 8N. Battery Door.Includes handle, hinge and latch. (Part No: 9N16938C) $40.57 [Show Picture]   Battery Hold Down Bolts - Battery Hold Down Bolts with nuts for 9N, 8N, 2N. One NCA10728WN and one 8N10728WN. (Part No: NCA10718A-BOLTS) $9.68 [Show Picture]   Battery Hold Down Bolt - Bolt with nut. For Models: 8N, NAA (1948-1954). (Part No: 8N10728WN) $4.90 [Show Picture]   Battery Hold Down Kit - For Models: 9N, 2N, 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000-4000 series (1953-1964). Dimensions of hold down, Width 9-1\4", length 7-1\4", center-to-center mounting holes 10-1\8". The short bolt included with this kit is not used on the 9N, 2N, 8N, NAA. A simple bolt is used but not supplied with this kit. (Part No: NCA10718A-KIT) $21.58 [Show Picture]   Battery Hold Down - Bolt with nut. For Models: 2000, 4000, 600, 700, 800, 900, 8N. (Part No: NCA10728WN) $4.90 [Show Picture]   Battery Hold Down - For 9N, 2N, 8N, 2000, 3000, 4000, all 6 volt with battery boxes 8N10732 and C0NN10732T. 9 1\4" width, 7 1\4" length, center to center mounting holes 10 1\8" (Part No: NCA10718A) $12.90 [Show Picture]   Battery, Door Handle Kit, Chrome - Chrome Latch kit. For Models: 9N, 2N, 8N. (Part No: S.60601) $13.20 [Show Picture]   Bolt Kit 8 Per PKG - Bolts for running board to running board bracket. Kit includes 8 running board bracket bolts, nuts and washers. For tractors:: 8N, NAA (1948-1954). (Part No: 355471-KIT) $24.86 [Show Picture]   Bolt Kit, Instrument Panel to Hood - Bolt, nut & washer kit. Bolt heads are EXACT as original. For 8N (1948-1952) (Part No: 355494-KIT) $4.42 [Show Picture]   Bumper Bolt Kit 4 Pieces - Bumper Bolt kit, front axle bolt kit, contains 2-3.40 bolts, 2-4 bolts, 4-351505s8 washers & hex nuts. For tractors: 9N, 2N, 8N, NAA, 600, 800 {1939-1957}. For 600, 700, 800, 900, NAA (Part No: 350790-KIT) $11.23 [Show Picture]   Bumpers 4 Per PKG - Rubber bumpers for gas filler lid door {set of 4}. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 11A16758A) $6.61 [Show Picture]   Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $22.95 [Show Picture]   Fender Bolt Kit 4 Per PKG - Bolt kit, rear fender bracket to axle housing, bolt, nut & washer kit {set of 4}. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900. (Part No: 355310-KIT) $31.04 [Show Picture]   Fender Bracket Spacer - Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For tractors: 8N, NAA {1949-1954}. For 321, 339, 340, 501 (Part No: 8N15532) $11.23 [Show Picture]   Fender - Fender panel (no longer supplied by OEM). Panel comes primed. To install, remove fasteners from old panel, drill new holes and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 9N, 2N, 8N (1939 to 1952) and row crop high clearance models 700 and 900 (1957-1962), fits right side or left side. Add $10.00 per fender in addition to regular shipping charges. (Part No: FF101) $77.21 [Show Picture]   Fender - For Models: 9N, 2N, 8N. Rear fender, dished type, with mounting bracket. Additional $20.00 per fender shipping charge will be added due to the size & weight of this item. (Part No: 8N16312) $98.42 [Show Picture]   Front Bumper - Heavy Duty - For 2N, 9N, 8N, . Front Bumper - Heavy Duty. Add an additional $15 for shipping due to weight. Welded, not rivited. Slightly different than original. (Part No: 311541HD) $91.64 [Show Picture]   Front Bumper - OEM Quality - Front bumper assembly with four bars for extra protection. Fits 9N, 2N, 8N. Made to take rugged service. Welded and riveted construction. Exact copy of the original OEM bumper. Add additional $15.00 for shipping due to weight. (Part No: 311541OE) $198.17 [Show Picture]   Grille Screen, Ford Farming, Red - Fits 8N, Replaces 8N-8210. Complete with fasteners. Exactly like the original. 15 7\8" wide, 18 1\4" tall. (Part No: 8N8210) $129.89 [Show Picture]   Grille, Exact Copy - Radiator Grille 'NEW'. Tear Drop Grille Bars. For tractors: 8N {1948-1952}. Made by Dennis Carpenter and is exactly like the Ford original. (Part No: 8N8204DC) $299.90 [Show Picture]   Grille - After market version of grille. For 8N (1948-1952). Will fit 2N and 9N with modification - remove brackets from old grille and apply to new grille. (Part No: 8N8204) $58.25 [Show Picture]   Grille - Near Restoration quality (not exact, but close). For 8N only. Will fit 2N and 9N with modification - remove brackets from old grille and apply to new grille. (Part No: 8N8204-R) $106.68 [Show Picture]   Hood Panel Right - Right Hand Hood Panel For 9N, 2N, 8N (Part No: 8N16618A) $59.77 [Show Picture]   Hood Panel - Left Hand Hood Panel For 9N, 2N, 8N (Part No: 8N16619) $59.77 Hood, w\ Scripted FORD Logo - Logo is raised laminate (Not Stamped). For Model: 8N. (Part No: 920037) $477.84 [Show Picture]   Hood - Includes battery cover. For tractors 9N, 2N, 8N. When used on 9N & 2N also order air cleaner door 8N9661. (Part No: 8N16612) $299.24 [Show Picture]   Running Boad Bracket, Left Rear - For Models: 8N (above S\N 263843), NAA. (Part No: 8N16487) $34.35 [Show Picture]   Running Boad Bracket, Right Rear - Fits 8N (above S\N 263843), NAA. (Part No: 8N16486) $34.32 [Show Picture]   Running Board - LH - Fits 8N. 1948-1952. Left hand side (as you are sitting on the tractor). Stamped steel square tread design like the original. Durable red powder coated finish. Includes mounting bolts. Brackets are NOT included. (Part No: 8N16473) $160.83 [Show Picture]   Running Board - RH - Fits 8N. 1948-1952. Right hand side (as you are sitting on the tractor). Stamped steel square tread design like the original. Durable red powder coated finish. Includes mounting bolts. Brackets are NOT included. (Part No: 8N16472) $160.83 [Show Picture]   Running Board Bracket - Front - For Models: 8N, NAA, 600, 700, 800, 900, 601, 801, 2000, 4000, all WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket Right OR Left side. Price is EACH bracket. EXACTLY LIKE ORIGINAL. (Part No: 8N16470) $26.72 [Show Picture]   Tool Box - Original Style - Tool Box. Ford 8N 1948-1952. Measures approx 11" L x 4.5" H x 5" D (tapers down to 2" D at opposite end). (Part No: 8N17005) $36.60 [Show Picture]   Tool Box - Universal Tool Box 15 1\2" X 4 3\4" X 4 1\4". Painted Red. (Part No: R2685) $29.40 Steering [Show Picture]   Axle Hardware Kit 4 PCS. - Bolt kit, front axle bolt, nut & washer. Holds right and left axles to center axle. For tractors: 9N, 2N, 8N {1939-1952}. For 600, 700, 800, 900, NAA (Part No: 350789-KIT) $11.23 [Show Picture]   Bearing And Cup Assembly - For models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft\top and bottom. (Part No: 8N3571-52) $8.59 [Show Picture]   Bearing Retainer - Steering Shaft Gear Thrust - For Models: 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Sold in quantities of 2 price is for 1. (Part No: 8N33581) $1.99 [Show Picture]   Bushing, Steering Gear, Pitman Shaft - For Models: 8N, NAA 1949-1954. (Part No: 8N3553) $4.49 [Show Picture]   Bushing - Bushing, steering gear sector {.84 long}. For tractors: 8N, 8NAN. NAA, NAB s\n 216988 & up. {2 used} (Part No: 8N3576B) $6.72 [Show Picture]   Bushing - Bushing, steering gear sector {1-1\2 long}. For tractors: 8N, 8NAN to s\n 216988 {1948-1949}. {4 used} (Part No: 8N3576A) $6.72 [Show Picture]   DRAG LINK -TIE ROD BOOT ASSORTMENT - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13\16" x 5\8" x 5\8", 1 15\16" x 3\4", 3\4", and 1 3\8" x 1" x 1\2". (Part No: TIERODBOOTS) $15.30 [Show Picture]   Drag Link End, Rear - RH Threads. For Models: 2N, 8N, 9N, 2000 4Cyl 1962-64, 2031, 2120 1963-64, 2131, 4000 1962-63, 4031, 4120, 4131, 600, 601, 611, 620, 630, 631, 640, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 850, 860, 861, 871, 881, NAA, NAB. (Part No: NAA33271A) $13.90 [Show Picture]   Drag Link End, Front - A= 3.875", B= .687", 18 Left Hand Thread, Manual Steering. For models 2N, 9N, 8N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1\62 to 12\64), 4000(1\62 to 12\64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1\16 of an inch longer. (Part No: NAA3270A) $10.24 [Show Picture]   Drag Link End - Fits 8N 48-52 Used on front of drag link. Left Hand Threads. 3.375" long from center of post to end of large thread. Large thread diameter is .687in (11\16in.). (Part No: 8N3270) $9.74 [Show Picture]   Drag Link Tube, - 32-3\4in. long. O.D. 0.875. Includes clamps (on each end), For 9N, 2N, 8N (For complete tie rod assembly add front drag link ends 8N3270 AND rear drag link ends NAA33271A. (**BEFORE ORDERING: Measure your drag link tube length..p\n 8N33315 drag link tube was also used on these tractors..it is 34-1\2 inch long). (Part No: 8N3314D) $38.95 [Show Picture]   Drag Link Tube - 34.5" long. Uses one RH and one LH Tie Rod End. For Models: 9N, 2N, (Used on RH side on early 8N & LH side on late 8N), Dexta, Super Dexta.(**BEFORE ORDERING: Measure your drag link tube length..p\n 8N33314D drag link tube was also used on 9N, 2N and 8N tractors..it is 32-3\4in. long). (Part No: 8N33315) $29.85 [Show Picture]   Dust Cover - Dust cover, steering drag link rear ball joint cover. For tractors: 9N, 2N, 8N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5\8 inch hole, Large end is 1 7\16 inch inside diamter. (Part No: 9N3324) $6.73 [Show Picture]   Dust Seal, Steering Arm - For Models: 2000, 3000, 4000, 600, 800, 8N, 900, NAA.Replaces C5NN3125A. (Part No: 8N3528) $3.00 [Show Picture]   Front Axle Assy W\ Bushing - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000(W\Manual 7-57\PS 55), 4000(W\Manual 7-57\PS 55). This axle is for models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. (Part No: D9NN3010EA) $175.93 [Show Picture]   Front Axle Support Bushing - For 2N, 2000, 4000, 8N, 9N, 600, 700, 800, 900, NAA, Jubilee. Front axle bushing 1939-1964 with standard front axle. (Part No: 2N3039) $4.91 [Show Picture]   Grommet - Grommet, steering column to instrumental panel. For tractors: 8N {1948-1952}. (Part No: 8N3578) $5.59 [Show Picture]   Pin, Front Axle - OD 1.743in, ID 1.310in, L 4in. For models: 9N, 2N (s\n 164489 & up), 8N. (Part No: 2N3126D) $23.64 [Show Picture]   Pin, Radius Rod to Front Axle - For Model: 8N 1948-52. (Part No: 357623S8) $6.96 [Show Picture]   Pitman Arm (LH\RH) - Steering Gear Pitman Arm for models 8N (SN 216989 and up 1949-1952), NAA, 600, 700, 800, 900, 2000, 4000. Replaces NCA3590A. (Part No: 86542743) $85.27 [Show Picture]   Seal, Steering Gear, Sector Shaft - For Models: 8N s\n above 2616989 1948-1952, (NAA, Jubilee 600, 620, 630, 640, 650, 660, 800, 820, 840, 860, 2000, 4000, all 1953 -1964). (Part No: D5UZ3591B) $6.16 Sector Kit - Kit conatains Adjuster bolt, nut, washer, o-Rings, shims, felt seal.Note adjuster bolt is allen head, not slotted lokie original.For models (8N 50-52), jubilee, NAA, 600, 800, 601, 801, 2000, 4000(->65). (Part No: S.67109) $15.15 [Show Picture]   Spindle \ King Pin Repair Kit - For 8N, 2N, 9N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: Upper Spindle Seal C5NN3125A, Spindle Top Bushing 2N3109, Spindle Bottom Bushing 2N3109, and Thrust Bearing C0NN3123B. (Part No: S.65986) $22.50 [Show Picture]   Spindle Bushing Set - Price Shown is For One Must Order in Quantities of Four, 1.250" I.D., 1.370" O.D., 1.500" Long Fits Models 2N 39-47, 8N 48-52, 9N, NAA 53-54, Jubilee. (Part No: 2N3109) $3.42 [Show Picture]   Spindle Nut - Fits on front spindles. Castle Nut 3\4in. x 16UNF. Fits: 9N, 2N, 8N, Dexta, Super Dexta, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: 387930S36) $1.14 [Show Picture]   Spindle Thrust Bearing - For Models: 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, Jubilee, SUPER DEXTA. (Part No: C0NN3123B) $7.55 [Show Picture]   Spindle, Front - Left Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3\4 inches with notch on outside and 1\4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3106B) $74.53 [Show Picture]   Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3\4 inches with notch on outside and 1\4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3105B) $74.53 [Show Picture]   Steering Arm - For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 957E3130. (Part No: 310799) $45.95 [Show Picture]   Steering Column Shim Kit - 2"x .005", 2"x .010", 2"x .020". For Models: 8N w\ 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. (Part No: S.61623) $20.26 [Show Picture]   Steering Gear Assembly - Complete manual steering gear assembly fits late 8N (1949-52). (Part No: S.67077) $521.40 [Show Picture]   Steering Gear, Ball Bearing - 3\8" ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. 22 balls required per box, 11 for each bearing, price is per ball. (Part No: S.10903) $.63 Steering Gear, Double Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67671) $63.78 Steering Gear, Inner Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67672) $9.60 Steering Gear, Outer Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67673) $19.72 Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67668) $120.48 Steering Gear, Single Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67670) $63.78 [Show Picture]   Steering Sector - Left Hand - Left Hand steering sector shaft (single gear) 5 tooth, For (8N s\n 216989 and up), NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 tooth, you can use this part but must replace both right and left. Shaft cover must be (late style), see picture. (Part No: 251293_) $141.17 [Show Picture]   Steering Sector - Right Hand - Has single gear (gear has 3 teeth followed by a wider spacer - followed by another 4 teeth ). Fits 8N s\n 216989 & up, NAA, Jubilee, 3600, 800, 601, 901, 2000, 4000, (1953 ->1964). If yours does not have 7 teeth, you can use this part but must replace both right and left sides. Shaft cover must be (late style), see picture. (Part No: 251294_) $144.38 [Show Picture]   Steering Sector Shaft Seal - Felt seal comes in package of 2.Price is for pair. For Models: NAA, 8N 1948-1954. (Part No: 8N3586) $3.38 [Show Picture]   Steering Shaft & Nut Assembly - For 8N 1948-49 with 4 Bolt Sector Adjustor - LEFT HAND SPIRAL. s\n less than 216989 (1948-1949). (Part No: 8N3575A) $170.28 [Show Picture]   Steering Shaft & Nut Assembly - RH Spiral w\Single Bolt Sector Adjustor. For Models: 8N (1950->1952) (Part No: 8N3575B) $137.48 [Show Picture]   Steering Shaft Bearing Cup - For models up to 1964 including: 8N late, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3552) $7.84 [Show Picture]   Steering Shaft Bearing and Cup Assembly - QTY 2 - 1-3\4" OD. For Models: 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft\top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505) $34.95 [Show Picture]   Steering Shaft Bearing - For models up to 1964 including: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3571-OE) $10.49 [Show Picture]   Steering Shaft Seat & Seal Kit - Upper - For 8N, NAA. This kit contains: 8N3570 Seal (Item 3), 8N3520 Spring (Item 4), 8N3518 Seat (Item 5), 8N3517 Bearing (upper) (Item 6). (Part No: 8N_STRKIT) $29.99 [Show Picture]   Steering Wheel Nut, Black - Nut, steering wheel ACORN style. 11\16 -20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack) $3.75 [Show Picture]   Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 11\16 -20. CHROME PLATED. For Models: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC) $3.93 [Show Picture]   Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn style nut, 11\16". Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S) $3.75 [Show Picture]   Steering Wheel, Splined Hub - Steering wheel OEM style, 17-1\2" diameter, 11\16 inch 36-SPLINE hub. Metal spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA.(R2091) (Part No: 8N3600-OE) $52.14 Wheels [Show Picture]   Bearing Cup, Rear Axle - Bearing, Tapered Cup For 4120, 600, 800, 2N, 8N, 9N, JUBILEE, NAA. (Part No: 9N4222) $5.44 [Show Picture]   FRONT Tire and Tube - Single rib 4.00 x 19". Made by FIRESTONE in the USA. An additional $10.00 will be added to shipping due to weight\size. For 8N, 9N, 2N. (Part No: R2073) $139.90 [Show Picture]   FRONT Tire and Tube - Three rib 4.00 x 19". Made by Titan in USA. An additional $10.00 will be added to shipping due to weight. For 8N, 9N, 2N. (Part No: R2074) $129.90 [Show Picture]   Front Rim (Blank) - Blank (no center) front rim, 3" x 19". Center must be removed from old rim and welded into new rim. For 2N, 8N, 9N. Add additional $10.00 to shipping due to weight. (Part No: R0651) $54.90 [Show Picture]   Front Rim - Heavy Duty - Front Rim with weight holes. 5.5" x 16", 3300 lb. capacity. 6 bolt, 6" circle, 4.62" pilot for 7.5" x 16" tires. Add $10 additional shipping due to size and weight. (Part No: C5NN1007A) $59.26 [Show Picture]   Front Rim - Front Rim with weight holes. 4.5" x 16", 2500 lb. capacity. 6 bolt, 6" circle, 4.62" pilot for 5.50" x 6.00" x 16" tires. Add $10 additional shipping due to size and weight. (Part No: 8N1015D) $51.74 [Show Picture]   Front Rim - Front Rim with weight holes. 8" x 16". 6 bolt, 6" circle, 4.62" pilot. Add $10 additional shipping due to size and weight. (Part No: D5NN1007A) $87.58 [Show Picture]   Front Rim - Front rim 4.00" x 19", 6-Lug, 4 5\8 inch Pilot Hole, 6 inch bolt circle. For Models: 8N, NAA, Jubilee, 600, 800. - (add additional $10.00 For shipping due to weight). (Part No: C5NN1015A_) $70.79 [Show Picture]   Front Wheel Bearing Kit - For model 9N, 2N 1939-1947, 8N 1948-1952, NAA, Jubilee thru 1954. Kit includes inner Cone(86609936), Inner Cup(86609935), outer Cone(86576860), Outer Cup(86577043), seal(NCA1190A). (Part No: CBPN1200A) $25.98 [Show Picture]   Front Wheel Cap - For 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, all 1939 to 1957. Front Wheel Cap. (Part No: 2N1139B) $4.80 [Show Picture]   Front Wheel Hub - For 8N, NAA. Front Wheel Hub. Uses CBPN1200A Wheel Bearing Kit. (Part No: 86511582) $65.90 [Show Picture]   Front Wheel Nut Set - Set of 10 - 10 1\2" - 20 wheel nuts. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Minimum qty order is 10, price is for each. (Part No: C5NN1012B) $.64 [Show Picture]   Front Wheel Stud Bolt Set - Set of 10 - Front wheel stud bolt measures 1\2" X 2".- WITHOUT nuts. Note: Nuts are available by ordering p\n C5NN1012B. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Minimum qty order is 10, price is for each. (Part No: C5NN1107F) $.65 [Show Picture]   Lug Nut, Rear Wheel - Price shown is for package of 8. Fits the following Models built from 1948 to 1964: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, Dexta, Super Dexta. (Part No: 8N1134) $6.78 [Show Picture]   Rear Rim - Six loop, 10" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Replaces NCA1020B. Add additional $25.00 to shipping due to weight. (Part No: NCA1020B) $148.56 [Show Picture]   Rear Rim - Six loop, 11" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Add additional $25.00 per rim to shipping due to weight. (Part No: C5NN1050E) $127.51 [Show Picture]   Rear Rim - Six loop, 12" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Add additional $25.00 to shipping due to weight (Part No: R2068) $165.33 [Show Picture]   Rear Wheel Center - For 28" & 32" Wheels, 8N, Dexta, NAA, Jubilee, 501, 600, 800, 700, 2000 EARLY, 4000 EARLY. Center has a 4.25 inch pilot hole and mounting bolts are 6 inches across center-to-center. Add additional $10.00 for shipping due to weight. (Part No: C5NN1036D) $159.90 [Show Picture]   Seal, Front Wheel Hub, OEM - Dust seal to original spec. 2.00" ID, 2-11\16" OD. For Models: 9N, 2N, 8N, NAA, Jubilee all from 1939-53. (Part No: 9N1190B) $1.98 [Show Picture]   Seal, Front Wheel Hub - Front Wheel Hub Dust Seal Fits, 2000 55-64 USA BUILT, 2N 39-47, 4000 55-64 USA BUILT, 600 55-64 USA BUILT, 700 55-64 USA BUILT, 800 55-64 USA BUILT, 8N 48-52, 900 55-64 USA BUILT, 9N, NAA 53-54.Sold in qty of 2, PRICE IS FOR EACH. Must be ordered in quantities of 2. Can replace 9N1190B. (Part No: NCA1190A) $3.58 [Show Picture]   Stop Body - For the Power Adjust Rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 503676M1. Must be ordered in multiples of 2, priced each. (Part No: C0NN1057A) $20.25 [Show Picture]   Wheel Clamp - Disc to rim. Double ramp type for power adjustable rims. For 28" rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241. (Part No: E5NN1043AA) $29.46 [Show Picture]   Wheel Rim Stop Body Screw - Use with power adjust rims PAR10X28 and C5NN1050J and C5NN1050H. For tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -). MUST be ordered in multiples of 2, price is for 1. (Part No: C0NN1058A) $11.25 [Show Picture]   Wheel Stud, Rear - 5\8" -18 thread .690" O.D. on serration. For Models: 8N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, (4000 1958-1964). Must be ordered in quantities of 8, priced individually. (Part No: 312696) $1.68 Return to List of Ford Models Manuals If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet! Model 8N Manuals 8N Service Manual 140 Pages (Part No: FO_9N2N8N_SV) $14.95 Ships within 1-2 business days. 8N IT After Market Shop Repair Manual 152 Pages (Part No: FO-4) $24.95 Ships within 1-2 business days. 8N Parts Manual 228 Pages (Part No: FO_9N2N8N_PT) $19.95 Ships within 1-2 business days. 8N - Operators Manual - Includes a Wiring Diagram 128 Pages (Part No: FO_8N_OP) $14.95 Ships within 1-2 business days. 8N Sherman 54C900-9010 Backhoe Attachment 4&6 Plunger Hydraulic Parts Manual (+OPT) 64 Pages (Part No: FO-P-SH54C900+) $29.95 Ships within 7 business days. 8N Sherman C-8 Backhoe Parts Manual 62 Pages (Part No: FO-P-C8 BKHOE) $29.95 Ships within 7 business days. 8N Sherman F-9 Backhoe Parts Manual 78 Pages (Part No: FO-P-SHERF9 BH) $29.95 Ships within 7 business days. 8N Sherman Transmission, Over-Under Tran, Forward-Reversing Tran,.. ..Live PTO Kit Service Manual(+PTS) 42 Pages (Part No: FO-S-SHER TRAN) $29.95 Ships within 1-2 business days. Sherman 49 Backhoe Attachment Goes On Ford 2N,8N,9N & Ferguson.. ..TO 20 & 30 Service Manual (+PTS+OPT) 51 Pages (Part No: FO-SOP-SHER54A) $29.95 Ships within 7 business days. Sherman 54A100 Backhoe Attachment Goes On Ford 2N,8N,9N & Ferguson.. ..TO 20 & 30 Service Manual (+PTS+OPT) 51 Pages (Part No: FO-SOP-SHER54A) $29.95 Ships within 7 business days. Sherman 54C900-54C9010 Backhoe Attachment Includes 4&6 Plunger.. ..Hydraulic, Goes On 2N,8N,9N,NAA,640,650,660,850,860 Parts Manual (+OPT) 64 Pages (Part No: FO-P-SH54C900+) $29.95 Ships within 7 business days. Wagner Loaders, Mounts on 2N, 8N, 9N, NAA, 600, 800, Fordson Major Parts Manual 457 Pages (Part No: IH-P-WAGNER) $65.95 Ships within 7 business days. Miscellaneous Related Items Literature [Show Picture]   9N Ford Ferguson Color Accessory Brochure - Sales brochure for miscellaneous 9N accessories. (Part No: BR-2) $5.00 [Show Picture]   How to use the Proof-Meter - For all Ford 4-Speed models equipped with a proof-meter. Get the most out of your engine. (Part No: BR-3) $5.00 [Show Picture]   Dearborn Farm Equipement Brochure 9N-2N-8N - Shows all equipment available for the N-series Ford tractor. (Part No: BR-4) $9.00 [Show Picture]   Ford 8N Dearborn Farm Equipment Color Brochure - Basic implements for 8N (Part No: BR-5) $7.00 [Show Picture]   Getting the Most Out of The Ferguson System - Owners and mechanics handbook for Ford tractors with the Ferguson System (Part No: BR-6) $12.95 [Show Picture]   Ford Tractor Sales Brochure 1948-1952 - All mechanical features of the new 8N (Part No: BR-7) $5.00 Videos [Show Picture]   (VHS Video) Ford 9N, 2N & 8N - Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions. (Part No: JDV07) $24.00 [Show Picture]   (VHS Video) Ford 9N, 2N & 8N - Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. (Part No: JDV06) $24.00 (VHS Video) Ford & Ferguson Hydraulic Repair Video - Features the 9N, 2N and 8N Ford plus the Ferguson TO-20 & TO-30 series tractors. If your tractor's hydraulics shake, operate slowly or perhaps don't work at all, this video will show you how to make the necessary repairs or adjustments or rebuild the hydraulic pump. (Part No: JDV08) $24.00 [Show Picture]   (DVD) Ford 9N, 2N & 8N - Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions. (Part No: JDV-01150) $24.00 [Show Picture]   (DVD) Ford 9N, 2N & 8N - Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. (Part No: JDV-01050) $24.00 (DVD) Ford & Ferguson Hydraulic Repair DVD - Features the 9N, 2N and 8N Ford plus the Ferguson TO-20 & TO-30 series tractors. If your tractor's hydraulics shake, operate slowly or perhaps don't work at all, this video will show you how to make the necessary repairs or adjustments or rebuild the hydraulic pump. (Part No: JDV-01250) $24.00 Hat [Show Picture]   Ford 8N Hat - Red\Black Two-Tone. High quality hat has a fabric strap size adjuster with brass buckle and sewn slot. Design is embroidered onto hat - not a patch. (Part No: FD8N) $19.95 Call 800-853-2651 to Order Or Click the "Buy" Button [Return to List of Ford Models]

Shopping Cart View Cart Checkout Phone Orders (800) 853-2651 Customer Service (360) 379-4808 Monday - Friday: 10:00 AM-6:30 PM EST Order online anytime! Your Shopping is Secure! Member of the Better Business Bureau

Order online or call (800) 853-2651

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us! We carry tractor parts and manuals for: Allis Chalmers, Case, Farmall, Ferguson, Ford, Fordson, International, International Harvester, John Deere, Massey Ferguson, Massey Harris, Oliver, and more. Products include: 3 Point Hitch parts, Alternators, Battery Accessories, Bearings, Belt-fan, Generator & Alternator, Brake Parts, Carburetor Repair Kits, Coils, Decals, Fenders, Generators, Hydraulic Cylinders, Ignition Kits, Manifolds, Mufflers, Paint, PTO Clutches, Radiators, Seals & Gaskets, Starter Drives, Starters, Tie Rod Ends, Tractor Gas Tanks, Tractor Seats, Water Pump Repair Kits, Water Pumps, Wheel Bearing Kits [Product Files] Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation Antique Tractor Headquarters All Rights Reserved TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.