Besides the engine, the biggest difference between the 430s and 530s (Ag models) is the tin. The hood tin is taller on a 530 (and 630) which requires 15" grill screens. The fuel tank is under the hood on a 430, while the 530 and 630's fuel tank is part of the tin work.... In other words the larger fuel tank is exposed.
Another difference is the fenders. 430s always had clam shell fenders and small footplates that were not connected to the fenders. The early 530s had full fenders that connected to the footplates similar to the 300s and x00B series tractors before them. The very late 530s and 570s were fitted with clam shell fenders similar to the 430s..
Another major difference was instrumentation. The 430s had a tach, temp gauge and two indicator lights (Gen and Oil pressure). Early 530s had cluster gauges that included Fuel level, Water Temp, Ammeter, Oil Pressure, Tach and Speedometer gauges. Later models (after serial number 8262800) had individual gauges.
The lower tin on the 430s resulted in a different placement of the hydrostatic steering valves on the later tractors. The 430's valve was placed in front of the radiator behind the grill screens, while the 530's was placed under the fuel tank aft of the engine. Of course this difference in valve placement resulted in different plumbing from the pump to the valve and then on to the steering cylinders. The early 530s had several different power steering setups before the hydrostatic steering system was introduced with serial number 8262800. The PS options for the early 430s were limited. The Char-Lynn system used on the 300B/400B was available, and there was a system available for the solid front axle utility. That being said power steering on the "economy model" 430 was not common.
Other than the items mentioned above, the drive train and chassis between the two models were identical, or nearly so....but there were a number of changes made from early to late models. - Joe
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.