|
Fair Weather Tractor
by Dave M.
No, Fair Weather isn't some rare brand. It's the kind you can't leave
out in the rain. Here's how it happened.
I had been casually looking for a tractor for weeks. I saw a few 9N's,
but they had even fewer amenities than the 8N my Grandpa bought new in
'52 with a Dearborn loader. That was 10 years before I was born, so I
grew up thinking that 8N was the world's best tractor. Grandpa had
greenhouses, with over half an acre under glass, and that 8N did almost
everything. It was the only tractor in my world, and I could handle it
by myself when I was ten.
Last year I borrowed that 8N from Dad to clear off some land I bought.
The land had been untouched for about 20 years, and was loaded with
brush, small trees, weeds, snakes, deer, and even a fox or two. I
learned why people want more horsepower, lower gearing and live PTO
and hydraulics. I'm afraid I destroyed the old brush hog Dad gave me:
the 3rd time I broke it the lower gear box casting was in small pieces.
Mom and Dad said I should just keep the 8N, but my brother rebelled.
He says there are things he just can't get done without that old 8N
because the forks can reach higher than the Bobcat. All of a sudden
I was in the market for a tractor of my own.
I told myself I didn't care about what tractor I bought, as long as it
was big enough, in good enough shape, was common enough that I could get
parts, and wasn't too expensive. I like to think I'm not a bigot; two
of my best friends own John Deere's. But I never did wind up stopping
to look at anything but a Ford.
One day, when I was on my way to visit one of my friends, I saw a tractor
for sale on the side of the road. It was a Ford, painted blue and white,
and the first thing I noticed was that the rear wheels had lug nuts like
the 8N. I stopped and took a quick look, and wrote down the phone number,
the asking price, and my impressions of the tractor. Old blue paint with
some original red showing on the top of the radius rods, no visible rust
except the exhaust. Sheet metal OK, good tires, no obvious cracks or leaks
anyplace. Hey, everything is on the wrong side of the engine! What a
strange transmission! I had never seen a Ford 860 before, and saw it only
in terms of the 8N that I knew.
When I got home I checked Yesterday's Tractors profile of the Ford 600, and
the info on the 600/800 parts page. That told me a lot of what I wanted to
know. This tractor had almost twice the horsepower of the 8N, an extra
forward gear, a 2 stage clutch and live PTO, and live hydraulics. According
to the serial number it was made in 1956.
The next day, I called up the owner and asked if I could get a good look.
My wife went with me, and even drove it a little. She said it steered a
lot easier than the 8N. I ran it for quite a while. No smoke. I checked
that it would hold an implement up even with the engine off, checked for
water in the oil, cracks in the castings, etc. The only problem I found
was that the left brake didn't grip well enough to turn the tractor.
I haggled for 1 minute and bought it. I drove it to my friend's house
a couple days later, until I could borrow a trailer from another friend.
I thought it would only be a few days, or a week at the most.
Three rainy weeks later, I went to my friend's house to get my tractor.
The front left tire was soft (my friend is a roofer, want to guess what
kind of nails I found in the tire?). When I tried to start the tractor
all I got was a big CLICK. We tried jump starting the tractor from my
friend's pickup. All we got was an even bigger CLICK! We finally started
it up by putting it in top gear and towing it with the pickup. Once I was
rolling I gently let out the clutch and it started right up. I drove the
tractor on to the trailer and took it home. I left the battery on the
charger all night.
The next morning I tried to start the tractor, and got the big CLICK again.
I took the battery to a local garage with a battery tester, and they blessed
it. So I started troubleshooting (with no manuals, of course). The solenoid
was good, and the starter was drawing lots of current. I removed the oil
filter and starter motor and discovered I couldn't even turn it by hand. I
opened it and discovered that the armature was covered with rust. After
applying a wire brush, 400 grit sandpaper, and a whole can of WD-40 I knew a
lot about that starter motor. I reassembled it and hooked it right to the
battery, and it worked. I bolted it back on, and she started right up.
I'm pretty happy with my tractor now. I've had some impromptu lessons about
the ignition system and the carburetor when I shut it off and couldn't get it
started again on a really hot day. I bought a full set of manuals and now I
feel pretty confident that I can fix anything that goes wrong with it.
I just make darn sure I don't leave it out in the rain.
|
Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
|
Home
| Manuals
| Parts
| 12-Volt Kits
| Carburetors
| Radiators
| Engine Kits
| Videos
| Books
Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|
|
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
